Month: September 2021

38573-88-5, name is 1-Bromo-2,3-difluorobenzene, belongs to bromides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. name: 1-Bromo-2,3-difluorobenzene

General procedure: In a 15 mL sealed tube equipped with a magnetic stirring bar were added 1 (1 mmol),2 (0.8 mmol), tert-butyl isocyanide (1.2 mmol, 136 muL), Pd(OAc)2 (0.03 mmol, 7 mg),DPEPhos (0.06 mmol, 32 mg), Cs2CO3 (0.8 mmol, 261 mg), and anhydrous DMF (2.0mL). The tube was purged with argon, and the contents were stirred at 100 °C for 2 h.Then Na2S*9H2O (1.2 mmol, 240 mg) was added for 2 h. After reaction completion,the mixture was filtered through a pad of Celite, and DMF was removed by a vacuum.The combined filtrates were refluxed in THF (15 mL) and oxalic acid (1 M, 3 mL) for 8h. The solvents were removed under reduced pressure, then poured into brine (20mL) and extracted by ethyl acetate (3 × 30 mL). The combined organic layers weredried (Na2SO4) and evaporated. The residue was purified on a silica gel column usingpetroleum ether/ethyl acetate as the eluent to give the pure target product.

The synthetic route of 38573-88-5 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Zhang, Fang-Ling; Chen, Zhen-Bang; Liu, Kui; Yuan, Qing; Jiang, Qing; Zhu, Yong-Ming; Synlett; vol. 29; 5; (2018); p. 621 – 626;,
Bromide – Wikipedia,
bromide – Wiktionary

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 58971-11-2, name is 3-Bromophenethylamine, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 58971-11-2

Intermediate (iv)N-[2-(3-Bromo-phenyl)-ethyl]-4-methyl-benzenesulfonamideTsCI (1 1 g, 57.5 mmol, 1 .15 eq.) was dissolved in DCM (150 ml_) and cooled to 0C. To this solution was added a solution of 3-bromo-phenethyamine (10 g, 50 mmol) in DCM (50 ml_), followed by Et3N (18 ml_). The solution was stirred at r.t. overnight when TLC (5% MeOH in DCM) showed that the reaction was complete. LCMS: t=4.158, MS 354/356. 3 g of polymer-supported-amine was added, stirred for 1 h at r.t. The solution was filtered through a Celite pad, rinsed with DCM and the solvent was evaporated to dryness, re-dissolved in DCM (100 mL) and water (20 mL). The two layers were separated, and the aqueous layer was extracted with DCM (20 mLx2). The combined DCM extracts were washed with 1 N H3PO4 (2 x 20 mL) and sodium bicarbonate (20 mL), and brine (15 mL x 2), dried (anhydrous potassium carbonate), filtered, and concentrated in vacuo. The crude product was purified on a silica gel column, eluted with DCM (TLC: DCM) to get 17.89 g (100%) of the title compound as a off-white solid, on standing.TLC (DCM): 0.7Rf.LCMS: RT = 3.72 minutes, MS: 356 (M+H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 58971-11-2.

Reference:
Patent; SANOFI; GAO, Zhongli; HARTUNG, Ryan; WO2011/143155; (2011); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Related Products of 142808-15-9, These common heterocyclic compound, 142808-15-9, name is 4-Bromo-2-fluorobenzotrifluoride, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Place 4-bromo-2-fluorotrifluorotoluene (29.2 g, 120 mmol, 1 eq.) In a dropping funnel and set aside. Diisopropylamine (14.6g, 144mmol, 1.2eq.) And 220ml of tetrahydrofuran were added to the reaction flask, cooled to -78 C, and n-butyllithium (52.8ml, 132mmol, 1.1eq.) Was added dropwise under the protection of nitrogen. After the dropwise addition, the mixture was stirred at 25 C for 1 hour. Recool to -78 C and add 4-bromo-2-fluorotrifluorotoluene dropwise. After the dropwise addition, the mixture was stirred at -78 C for 2 hours. Iodomethane (18.7g, 132mmol, 1.1eq.) Was added dropwise, and the temperature was gradually raised to 25 C for 16 hours.[0058]After the reaction was completed, it was cooled in an ice water bath, and 150 ml of saturated ammonium chloride solution was added dropwise for quenching. It was extracted with ethyl acetate, and the organic phase was concentrated to obtain 26.8 g of yellow oily 1-bromo-3-fluoro-2-methyl-4- (trifluoromethyl) benzene in 87% yield. Used directly in the next step.

Statistics shows that 4-Bromo-2-fluorobenzotrifluoride is playing an increasingly important role. we look forward to future research findings about 142808-15-9.

Reference:
Patent; Ali Biological New Materials (Changzhou) Co., Ltd.; Shi Jianyun; Xu Yibo; Shi Hongliang; Dai Hongsheng; Zhang Jun; (6 pag.)CN110885290; (2020); A;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 39478-78-9, name is 5-Bromo-2-methylaniline, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 39478-78-9, category: bromides-buliding-blocks

4-Chlorophenylboronic acid (20.2 g, 0.13mol) and tetrakis(triphenylphosphine)palladium (0) (3.7g, 0.003 mol) are added to a solution of 5-bromo-2-methylaniline (20 g, 0.1 mol) in 1 ,2- dimethoxyethane (200 ml). After stirring the reaction mixture for 15 minutes at 200C, a solution of 20% aqueous sodium carbonate (300ml) is added to the mixture, and the resulting mixture is refluxed for 24 hours. The reaction mixture is cooled to room temperature, diluted with water (600 ml) and extracted using ethyl acetate. The combined organic extracts are dried over anhydrous sodium sulfate, filtered and the filtrate evaporated in vacuo. The residue is further purified by column chromatography on silica gel, eluting with 7% ethyl acetate in hexane to give 5-(4- chlorophenyl)-2-methylaniline (21.0 g).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; SYNGENTA PARTICIPATIONS AG; WO2008/110307; (2008); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 67567-26-4, name is 4-Bromo-2,6-difluoroaniline, This compound has unique chemical properties. The synthetic route is as follows., Formula: C6H4BrF2N

Compound 121 : 4-(9-Cyclopentyl-7,7-difluoro-5-methyl-6-oxo-6,7,8,9- tetrahydro-5H-pyrimido[4,5-b][l,4]diazepin-2-ylamino)-3-fluoro-5-methoxybenzoic acid; [0581] 5-Bromo-l,3-difluoro-2-nitrobenzene: To a mixture of acetic acid (30 mL), 30% H2O2 (20 mL) and concentrated sulfuric acid (1 mL) was added l-bromo-2,6- difluoroaniline (5 g, 24 mmol) in acetic acid (10 mL) dropwise at 85 0C. The reaction mixture was heated for 1 h. It was then cooled down, diluted to water and extracted with ethyl acetate. The organic layer was dried and concentrated to a red residue, which was purified by flash column (EtOAc in Hexane 2-5%) to give the product as yellow solid (2.7 g, 47%). 1H NMR (400 MHz, CHLOROFORM-J) delta ppm 7.33 (m, 2 H).

According to the analysis of related databases, 67567-26-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; TAKEDA PHARMACEUTICAL COMPANY LIMITED; WO2009/42711; (2009); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Electric Literature of 89359-54-6,Some common heterocyclic compound, 89359-54-6, name is 9-Bromo-1-nonene, molecular formula is C9H17Br, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE 1 This example illustrates the synthesis of several compounds that are used as intermediates for the synthesis of other compounds. 1-(8,9-Oxidononyl)-3,7-dimethylxanthine was synthesised as follows: A mixture of theobromine (17.64 g, 98 mmol) and sodium hydride (2.35 g, 98 mmol) in dimethylsulfoxide (250 ml) was stirred for 15 minutes. 9-Bromo-1-nonene (20.0 g, 98 mmol) was added and stirring continued for 3 days. The reaction mixture was poured into water (300 ml) and extracted with dichloromethane (4*200 ml). The combined organic layers were washed with saturated aqueous sodium chloride solution (2*150 ml), dried over sodium sulfate, and the solvents evaporated under vacuum. The residue was crystallized (dichloromethane-ether) to give 1-(8-nonenyl)-3,7-dimethylxanthine (24.34 g, 99% yield) as white crystals.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 9-Bromo-1-nonene, its application will become more common.

Reference:
Patent; Cell Therapeutics, Inc.; US5641783; (1997); A;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 51437-00-4, name is 4-Bromo-1-fluoro-2-methylbenzene, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 51437-00-4, Quality Control of 4-Bromo-1-fluoro-2-methylbenzene

Step 1. 5-Bromo-2-fluoro-3-methylbenzaldehyde: To a stirred solution of di- isopropyl amine (4.01 g, 39.88 mmol) in THF (20 mL) was added n-butyl lithium (1.6 M in hexane) (19.9 mL, 31.91 mmol) at -78 C slowly dropwise over the period of 10 min, the reaction mixture was stirred at -78C for 30 min. A solution of 4-bromo-l-fluoro-2- methylbenzene (5.0 g, 26.6 mmol) in THF (30.0 mL) was added at -78C, and the reaction mixture was stirred for lh at the same temperature. DMF (5.0 mL) was added and stirred at – 78C for another 30 min. The reaction was monitored by TLC; then the reaction mixture was quenched with IN HC1 solution (aq) at 0C. The aqueous layer was extracted with diethyl ether, washed with water and saturated brine solution. The combined organic layer was dried over anhydrous Na2S04 and concentrated under reduced pressure to obtain the crude compound purified by flash column chromatography (Si02, 100-200 mesh; eluting with 5% ethyl acetate/ pet ether) to afford the title compound as a white solid (3.6 g, 64 ); mp 48- 50C: ]H NMR (400 MHz, CDC13) delta 8.33 (s, 1H), 8.22 (s, 1H), 7.67 (s, 1H), 7.60 (s, 1H), 6.75 (dd, J = 17.6, 10.8 Hz, 1H), 5.92 (dd, J = 17.6, 10.8 Hz, 1H), 5.52 (d, J = 17.6 Hz, 1H), 2.21 (s, 3H); ESIMS m/z 211.35 ([M-H]”).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-Bromo-1-fluoro-2-methylbenzene, and friends who are interested can also refer to it.

Reference:
Patent; DOW AGROSCIENCES LLC; LO, William C.; HUNTER, James E.; WATSON, Gerald B.; PATNY, Akshay; IYER, Pravin S.; BORUWA, Joshodeep; WO2014/100163; (2014); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Reference of 766-46-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 766-46-1, name is 2′-Bromophenylacetylene belongs to bromides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

under high purity nitrogen atmosphere, into 10ml of Schlek reaction tube was 0.02mmol benzoquinolin triphenylphosphine ring iridium hydrogen adduct material (4), 1mmol2- bromophenyl acetylene, 2mmol benzyl alcohol, and 1.0 mmol of potassium carbonate in 3ml of toluene, the reaction tube was replaced with nitrogen 3 times, then in an oil bath with magnetic stirring and heated to 110 deg.] C, the reaction was refluxed for 20 hours. Oil bath was removed, the water bath to room temperature; 3ml adding water to the reaction liquid, extracted three times with 5ml of dichloromethane, and the combined organic phases were dried over anhydrous MgSO4 for 30 minutes and filtered; the filtrate was concentrated on a rotary evaporator, the remaining oil residue ether as eluent, separated by thin layer chromatography on silica gel to give the pure product 1-phenyl-3 (2-bromophenyl) -1-propanone, yield 88%.

The synthetic route of 2′-Bromophenylacetylene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Luoyang Normal University; Li, Xiao Dong; Li, gongmei; Xu, Chen; Hao, Xin Qi; Xiao, Zhi Qiang; (10 pag.)CN103242372; (2016); B;,
Bromide – Wikipedia,
bromide – Wiktionary

73918-56-6, name is 2-(4-Bromophenyl)ethanamine, belongs to bromides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Patent; INDIANA UNIVERSITY RESEARCH AND TECHNOLOGY CORPORATION; ASSEMBLY BIOSCIENCES, INC.; TURNER, William W.; ARNOLD, Lee Daniel; MAAG, Hans; ZLOTNICK, Adam; WO2015/138895; (2015); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Related Products of 10269-01-9, The chemical industry reduces the impact on the environment during synthesis 10269-01-9, name is (3-Bromophenyl)methanamine, I believe this compound will play a more active role in future production and life.

(4?-(Trifluoromethyl)biphenyl-3-yl)methanamine. A 1 00-mL single-neck round-bottomed flask equipped with a magnetic stirrer and a reflux condenser was charged with (3- bromophenyl)methanamine (570 mg, 3.0 mmol), 4-(trifluoromethyl)phenylboronic acid (558 mg, 3.0 mmol), Pd(PPh3)4 (173 mg, 0.15 mmol), K3P04 (1.91 g, 9.0 mmol), DME (30 mL) and H20 (6 mL). The system was subject to 3 cycles of vacuum/argon flush and heated at reflux for overnight. The mixture was cooled to room temperature and filtered. The filtrate was concentrated under reduced pressure. The residue was purified by silica-gel column chromatography eluting with 1:20 MeOH/CH2C12 to afford the title compound (640 mg, 85%) as brown solid. MS-ESI: [M+H] 252.1.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, (3-Bromophenyl)methanamine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BROTHERTON-PLEISS, Christine E.; CHEN, Huifen; CHEN, Shaoqing; CHEN, Zhi; ERICKSON, Shawn David; ESTRADA, Anthony; KIM, Kyungjin; LI, Hongju; LOVEY, Allen John; LYSSIKATOS, Joseph P.; QIAN, Yimin; SO, Sung-Sau; WOVKULICH, Peter Michael; YI, Lin; WO2014/49047; (2014); A1;,
Bromide – Wikipedia,
bromide – Wiktionary