Month: September 2021

Related Products of 401-84-3, A common heterocyclic compound, 401-84-3, name is 1,3-Dibromo-5-(trifluoromethyl)benzene, molecular formula is C7H3Br2F3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A vial was charged with N-(2,4-dimethoxybenzyl)-l-methyl-3-(4,4,5,5- tetramethyl-l,3,2-dioxaborolan-2-yl)-N-(l,2,4-thiadiazol-5-yl)-lH-indole-6-sulfonamide (0.200 g, 0.351 mmol), potassium phosphate (0.260 g, 1.227 mmol), and PdCi2(dppf)- CH2C12 (0.029 g, 0.035 mmol). DMF (0.150 mL) was added, followed by 1,3-dibromo- 5-(trifluoromethyl)benzene (0.166 ml, 1.052 mmol). The vial was flushed with argon, sealed, and stirred at 85 C for two hours. The reaction was diluted with ethyl acetate and washed with water. The aqueous layer was extracted with ethyl acetate, and the combined organic layers were washed with brine, dried with sodium sulfate, filtered, and concentrated. The material was purified via column chromatography (silica gel, gradient elution 0 to 75% EtOAc:Hexane) to afford 3-(3-bromo-5-(trifluoromethyl)phenyl)-N- (2,4-dimethoxybenzyl)- 1 -methyl-N-( 1 ,2,4-thiadiazol-5-yl)- 1 H-indole-6-sulfonamide (.081 g, 0.121 mmol, 34.6 % yield) as a white solid, m/z (ESI) 668.0 (M+H)+.

The synthetic route of 401-84-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; DINEEN, Thomas; MARX, Isaac, E.; NGUYEN, Hanh, Nho; WEISS, Matthew; AMGEN INC.; WO2013/25883; (2013); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Reference of 112734-22-2,Some common heterocyclic compound, 112734-22-2, name is (4-Bromo-2-fluorophenyl)methanamine, molecular formula is C7H7BrFN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

N-[(4-Bromo-2-fluorophenyl)methyl]-4-tert-butylbenzamide In a 25-mL round bottom flask purged and maintained with an inert atmosphere of nitrogen, (4-bromo-2-fluorophenyl)methanamine (1.000 g, 4.90 mmol, 1.00 equiv) was dissolved in dichloromethane (20 mL), to which were added 4-tert-butylbenzoic acid (1.310 g, 7.35 mmol, 1.50 equiv), HOBT (993 mg, 7.35 mmol, 1.50 equiv), EDCI (1.409 g, 7.35 mmol, 1.50 equiv) and DIEA (1.267 g, 9.80 mmol, 2.00 equiv) in sequence at room temperature. The resulting solution was stirred for 16 h at room temperature. When the reaction was done, it was quenched by the addition of 10 mL water and the mixture was extracted with ethyl acetate (3*20 mL). The organic layers were combined, dried over sodium sulfate and concentrated under reduced pressure. The residue was purified in a silica gel column eluting with ethyl acetate in petroleum ether (5% to 30% gradient) to afford N-[(4-bromo-2-fluorophenyl)methyl]-4-tert-butylbenzamide (700 mg, 39%) as yellow solid.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route (4-Bromo-2-fluorophenyl)methanamine, its application will become more common.

Reference:
Patent; Merck Patent GmbH; GAILLARD, Pascale; SEENISAMY, Jeyaprakashnarayanan; LIU-BUJALSKI, Lesley; CALDWELL, Richard D.; POTNICK, Justin; QIU, Hui; NEAGU, Constantin; JONES, Reinaldo; WON, Annie Cho; GOUTOPOULOS, Andreas; SHERER, Brian A.; JOHNSON, Theresa L.; GARDBERG, Anna; (234 pag.)US2016/96834; (2016); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 58971-11-2, name is 3-Bromophenethylamine, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 58971-11-2, Quality Control of 3-Bromophenethylamine

Di-tert-butyl dicarbonate (0.30 g, 1.38 mmol) and triethylamine (0.44 mL, 3.13 mmol) were added to a stirred solution of [2-(3-bromophenyl)ethyl]amine (0.25 g, 1.25 mmol) in tetrahydrofuran (2 mL) and the mixture was stirred at room temperature. After 3 hours ethyl acetate and water were added to the mixture. The organic layer was washed with brine, dried (Na2SO4) and evaporated. Purification of the residue by flash chromatography (8:2 hexanes/ethyl acetate) gave the title compound (0.29 g, 77%) as a solid.LRMS (m/z): 300/302 (M+1)+.1 H NMR (400 MHz, CHLOROFORM-d) delta ppm 1.44 (s, 9 H) 2.75-2.80 (m, 2 H) 3.36-3.41 (m, 2 H) 4.56 (br. s., 1 H) 7.10-7.20 (m, 2 H) 7.35 – 7.40 (m, 2 H)

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Bromophenethylamine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Almirall, S.A.; Vidal Juan, Bernat; Forns Berenguel, Maria Pilar; Castillo Mcquade, Marcos; Erra Sola, Montserrat; Mir Cepeda, Marta; EP2441755; (2012); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 858121-94-5, name is 4-(Bromomethyl)-1,1-difluorocyclohexane, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C7H11BrF2

General procedure: DIPEA (778 muIota, 4.46 mmol) was added dropwise to a stirred solution of N-(2-hydroxyethyl)-4- (2H-tetrazol-5-yl)benzenesulfonamide (300 mg, 1.1 14 mmol, Intermediate 17′) and 2- (bromomethyl)tetrahydro-2H-pyran (285 muIota, 2.228 mmol, commercial source: Aldrich) in N,N- Dimethylformamide (DMF) (3714 muIota) at rt under nitrogen. The mixture was stirred at rt for 3 days. As starting material remained, it was stirred at 70 C overnight. The mixture was concentrated under reduced pressure. The crude compound was purified by flash column chromatography (silica; EtOAc-cyclohexane from 0/100 to 50/50). The desired fractions were collected and concentrated in vacuo to obtain the product as a racemic mixture N-(2- hydroxyethyl)-4-(2-((tetrahydro-2H-pyran-2-yl)methyl)-2H-tetrazol-5-yl)benzenesulfonamide (49 mg, 0.133 mmol, 28%). NMR (400 MHz, Acetone-d6) delta 7.84-7.78 (m, 2H), 7.56-7.50 (m, 2H), 7.33 (t, J = 5.9 Hz, 1 H), 4.37-4.32 (m, 2H), 4.25 (t, J = 5.6 Hz, 1 H), 3.50-3.44 (m, 1 H), 3.38-3.32 (m, 1 H), 2.94-2.90 (m, 2H), 2.86-2.80 (m, 1 H), 2.41-2.37 (m, 2H), 1.40-1.25 (m, 2H), 1.12-0.85 (m, 4H). MS m/z [M-H]”= 366.2

According to the analysis of related databases, 858121-94-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY DEVELOPMENT LIMITED; ALEMPARTE-GALLARDO, Carlos; ENCINAS, Lourdes; ESQUIVIAS PROVENCIO, Jorge; (206 pag.)WO2019/34729; (2019); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 1647-26-3 name is 1-Bromo-2-cyclohexylethane, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. 1647-26-3

Combine 6- (4-Piperidin-3-yl-phenoxy)-nicotinamide (free base compound of example 322) (0.0255g, 0.0858 MMOL), 1-BROMO-2-CYCLOHEXYLETHANE (0.0150 mL, 0.0958 mmol), and potassium carbonate (0.0245 g, 0.177 mmol) in dimethylformamide (1.0 mL) and stir for 10 min. Purify the reaction mixture by ion exchange chromatography (SCX resin, METHANOL- 2 M AMMONIA/METHANOL) and silica gel chromatography (15: 1 No. 10: 1 ethyl acetate: methanol) to provide 0.0146 g (42%) of the title compound as an off-white foam: high resolution mass spectrum (electrospray): m/z calc for C25H34N302 408. 2651, found 408.2661 ; H NMR (methanol-d4): 8.61 (s br, 1H), 8. 28 (d, 1H, J= 7.8 Hz), 7.36 (d, 2H, J= 7.8 Hz), 7.12 (d, 2H, J= 7.8 Hz), 7.01 (d, 1H, J = 8.3 Hz), 3.07 (d, 2H, J = 10.2 Hz), 2.89 (t, 1H, J= 11.2 Hz), 2.55-2. 42 (M, 2H), 2.15-1. 93 (m, 4H), 1.93-1. 64 (m, 8H), 1.63-1. 43 (m, 4H), 1.40-1. 15 (m, 8H), 1.07-0. 86 (m, 3H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1-Bromo-2-cyclohexylethane, and friends who are interested can also refer to it.

Reference:
Patent; ELI LILLY AND COMPANY; WO2004/26305; (2004); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 955959-84-9, name is 4-(4-Bromophenyl)dibenzo[b,d]furan, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 955959-84-9, Formula: C18H11BrO

In this example, a method for synthesizing N-(l, r-biphenyl-4-yl)-N-[4-(dibenzofuran-4-yl)phenyl]-9,9-dimethyl-9H-fluoren-2-ami ne (abbreviation: FrBBiF-II) represented by Structural Formula (100) will be described. [0238] [0239] First, 2.1 g (6.6 mmol) of 4-(4-bromophenyl)dibenzofuran, 2.4 g (6.7 mmol) of N-(l,l ‘-biphenyl-4-yl)-9,9-dimethyl-9H-fluoren-2-amine, and 1.9 g (20 mmol) of sodium tert-butoxide were put in a 200-mL three-neck flask and the air in the flask was replaced with nitrogen. To this mixture, 33 mL of toluene, 0.30 mL of a 10 % hexane solution of tri(ter/-butyl)phosphine, and 48 mg (0.1 mmol) of bis(dibenzylideneacetone)palladium(0) were added, and stirring was performed at 90 C for 7.5 hours. After the stirring, suction filtration through Florisil (produced by Wako Pure Chemical Industries, Ltd., Catalog No. 540-00135), Celite (produced by Wako Pure Chemical Industries, Ltd., Catalog No. 531 – 16855), and alumina was carried out to give a filtrate. The filtrate was concentrated to give a solid. The solid was purified by silica gel column chromatography (the developing solvent was hexane and toluene in a ratio of 3:1) to give a solid. The solid was recrystallized from toluene and hexane, so that 3.2 g of an objective solid was obtained in a yield of 81 %. A reaction scheme of this reaction is shown below. [0240] [0241] Using a train sublimation method, 1.0 g of the obtained solid was purified by sublimation. In the purification by sublimation, the pressure was 2.6 Pa, the flow rate of argon gas was 5.0 mL/min, and the temperature of the heating was 289 C. After the purification by sublimation, 0.99 g of a solid which was the object of the synthesis was obtained at a collection rate of 95 %. [0242] Results of measurement of the obtained solid by nuclear magnetic resonance ( NMR) are shown below. NMR (CDCI3, 500 MHz): delta = 1.46 (s, 6H), 7.18 (dd, J = 8.5 Hz, 2.5 Hz, 1 H), 7.26-7.48 (m, 14H), 7.53-7.56 (m, 2H), 7.60-7.68 (m, 6H), 7.86-7.91 (m, 3H), 7.99 (d, J = 7.5 Hz, 1 H). [0243] Thermogravimetry-differential thermal analysis (TG-DTA) of the obtained FrBBiF-II was performed. The measurement was conducted by using a high vacuum differential type differential thermal balance (TG/DTA 2410SA, manufactured by Bruker AXS Kappa.Kappa.)· The measurement was carried out under a nitrogen stream (a flow rate of 200 mL/min) and a normal pressure at a temperature rising rate of 10 C/min. The relationship between weight and temperature (thermogravimetry) shows that the 5 % weight loss temperature is 393 C, which is indicative of high heat resistance. [0244] FIGS. 13A and 13B are NMR charts. Note that FIG. 13B shows an enlarged part of FIG. 13A in the range of 7.00 ppm to 8.25 ppm. The measurement results confirmed that N-(l, -biphenyl-4-yl)-N-[4-(dibenzofuran-4-yl)phenyl]-9,9-dimethyl-9H-fluoren-2-ami ne (abbreviation: FrBBiF-II), which was the target substance, was obtained. [0245] Physical Properties of FrBBiF-Il FIG. 14A shows an absorption spectrum and an emission spectrum of FrBBiF-II in a toluene solution of FrBBiF-II, and FIG. 14B shows an absorption spectrum and an emission spectrum of a thin film of FrBBiF-II. The spectra were measured with a UV-visible spectrophotometer (V550, produced by JASCO Corporation). The spectra of FrBBiF-II in the toluene solution of FrBBiF-II were measured with a toluene solution of FrBBiF-II put in a quartz cell. The spectra of the thin film were measured with a sample prepared by deposition of FrBBiF-II on a quartz substrate by evaporation. Note that in the case of the absorption spectrum of FrBBiF-II in the toluene solution of FrBBiF-II, the absorption spectrum obtained by subtraction of the absorption spectra of the quartz cell and toluene from the measured spectra is shown in the drawing and that in the case of the absorption spectrum of the thin film of FrBBiF-II, the absorption spectrum obtained by subtraction of the absorption spectrum of the quartz substrate from the measured spectra is shown in the drawing. [0246] As shown in FIG. 14A, in the case of FrBBiF-II in the toluene solution, an absorption peak was observed at approximately 360 nm, and an emission wavelength peak was observed at approximately 415 nm (excitation wavelength: 366 nm). As shown in FIG. 14B, in the case of the thin film of FrBBiF-II, absorption peaks were observed at approximately 368 nm, 294 nm, 266 nm, 247 nm, and 209 nm, and an emission wavelength peak was observed at approximately 428 nm (excitation wavelength: 376 nm). Thus, it was found that absorption and light emission of FrBBiF-II occur in extremely short wavelength regions. [0247] The ionization potential of FrBBiF-II in a thin film state was measured by photoelectron spectroscopy (the measuring instrument: AC-2, manufactured by Riken Keiki, Co., Ltd.) in the air. The obtained value of the ionization potential was converted into a negative value, so that the HOMO level of FrBBiF-II was determined to be -5.61 eV. From the da…

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; SEMICONDUCTOR ENERGY LABORATORY CO., LTD.; OGITA, Kaori; SEO, Satoshi; SEO, Hiromi; TAKAHASHI, Tatsuyoshi; WO2014/157018; (2014); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1003-99-2, name is 2-Bromo-5-fluoroaniline, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 1003-99-2

2-Bromo-5-fluoro-N-(propan-2-yl)aniline E-1.7″” ‘ 2-bromo-5-fluoroaniline E-1.7″”” (2.00 g; 10.53 mmol) is suspended in 20 ml DCM and propan-2-one (1.55 ml; 21.05) is added and the reaction mixture is stirred for 16 at 20°C. Afterwards sodium triacetoxyborohydride (4.69 g; 21.05 mmol) is added and the reaction mixture is stirred for 48h at 20 °C. The reaction mixture is poured into water and extracted with DCM. The combined organic layer is dried over MgS04 the solid materials are filtered off and HCl in dioxane is added until the pH value is below 2. The solvents are concentrated under reduced pressure. The crude product is purified using reversed phase chromatography (Method: prep. HPLC1). Product containing fractions are combined and extracted with DCM. To the organic layer HCl in dioxane is added until the pH value is below 2. The solvents are concentrated under reduced pressure. Yield 91percent (2.57 g; 9.58 mmol) HPLC-MS: tRet = 1.09 min; method VAB

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1003-99-2.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; ENGELHARDT, Harald; WO2015/169962; (2015); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 3814-30-0, name is (Bromomethyl)cyclopentane, A new synthetic method of this compound is introduced below., Recommanded Product: (Bromomethyl)cyclopentane

To a solution of 3-cyclopropylimidazo[1 ,5-a]pyrazin-8(7H)-one (300 mg, 1.71 (0680) mmol) in anhydrous DMF (5 mL) was added K2C03 (355 mg, 2.57 (0681) mmol) and (bromomethyl)cyclopentane (335 mg, 2.05 mmol). The reaction was stirred at 65C for 16 hours. The mixture was filtered and the filtrate was purified by preparative LC- MS to yield 7-(cyclopentylmethyl)-3-cyclopropylimidazo[1 ,5-a]pyrazin-8(7H)-one 210 mg (47%). (0682) 1H NMR (DMSO-de, 400 MHz): delta 7.53 (s, 1 H), 7.51 (d, J = 6.0 Hz, 1 H), 6.90 (d, J = 6.0 Hz, 1 H), 3.69 (d, J = 7.6 Hz, 2H), 2.29-2.24 (m, 2H), 1.58-1.45 (m, 6H), 1.22-1.19 (m, 2H), 1.00- 0.89 (m, 4H). (0683) LC-MS: {m/z) 258.2 (MH+) tR (minutes, method 3) = 2.24 minutes

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; H. LUNDBECK A/S; KEHLER, Jan; RASMUSSEN, Lars, Kyhn; LANGGARD, Morten; JESSING, Mikkel; VITAL, Paulo, Jorge, Vieira; JUHL, Karsten; (159 pag.)WO2018/78042; (2018); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 28342-75-8,Some common heterocyclic compound, 28342-75-8, name is 1,5-Dibromo-2,4-difluorobenzene, molecular formula is C6H2Br2F2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A 200-ml three-necked flask was replaced with nitrogen. 207 mmol (8.78 g) of lithium chloride and 1.6 mmol (1.13 g) of bistriphenylphosphine palladium dichloride were added, and the flask was replaced with nitrogen again. Next, 80 ml of toluene and 20.7 mmol (5.62 g) of the compound A were added. Further, 62.1 mmol (15.0 g) of trimethyl-2-pyridyl tin were dropped, and the whole was refluxed under heat for 3 days in a stream of nitrogen. After the resultant had been left standing to cool, 150 ml of a saturated aqueous solution of potassium fluoride were added, and the whole was stirred for 30 minutes. A solid was removed by filtration, and the remainder was extracted with methylene chloride and a 5percent aqueous solution of sodium hydrogen carbonate. After that, sodium sulfate was added to an organic layer for dehydration. The solvent was removed under reduced pressure, whereby a brown solid was obtained. Ether was added to the resultant solid, and the solvent was removed by filtration, whereby 4.35 g of a compound B were obtained (78.3percent yield).

The synthetic route of 28342-75-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Chuo University; Idemitsu Kosan Co., Ltd.; EP1961743; (2008); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 583-70-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 583-70-0, name is 2,4-Dimethylbromobenzene belongs to bromides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Step 2: to a suspension of magnesium powder (239 mg, 9.79 mmol) in dry THF(small amount) was added dropwise 1 -bromo-2,4-dimethylbenzene (1.64 g, 8.86mmol) diluted in dry THF (20 mL) and the reaction was heated at 40C. Aftercompletion of Grignard reagent, 2-methyl-N-[(5-methylfuran-2-yl)methylidene]propane-2-sulfinamide (995 mg, 4.66 mmol) diluted in THF (10mL) was added to the solution. The reaction mixture was stirred at rt overnight.Water was added to quench the reaction. The two layers were partitionated andthe organic layer was dried over Mg504, filtered and the solution wasconcentrated under reduced pressure. The crude material was purified by silicagel column chromatography using a gradient of hexanes/EtOAc ([5:1] to [4:1]) to afford N-[(2,4-di methyl phenyl)(5-methylfuran-2-yl)methyl]-2-methylpropane-2- sulfinamide (1 .27 g, 85%) as yellowish oil

The synthetic route of 2,4-Dimethylbromobenzene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GENFIT; DELHOMEL, Jean-Francois; PERSPICACE, Enrico; MAJD, Zouher; PARROCHE, Peggy; WALCZAK, Robert; BONNET, Pascal; FOGHA, Jade; (82 pag.)WO2018/138354; (2018); A1;,
Bromide – Wikipedia,
bromide – Wiktionary