Month: September 2021

Electric Literature of 875664-41-8, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 875664-41-8 name is 3-Bromo-4,5-difluoroaniline, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

1 -methyl-4-[(3 -methyloxetan-3 -yl)sulfamoyl]pyrrole-2-carboxylic acid (200 mg, 0.73 mmol) was dissolved in N,N-dimethylformamide (2 mL). HATU (0.35 g, 0.91 mmol) was added followed by diisopropylethylamine (0.38 mL, 2.19 mmol). The resulting mixture was stirred for 30 minutes at room temperature. Then, 4-fluoro-3,5-dimethylaniline (0.2 g, 1.46 mmol) was added. The resulting mixture was stirred for 24 hours and next poured onto 10 mL of ice. The mixture was extracted using 2-Me-THF (3 x 10 mL). The combined organics were washed withbrine, dried on Na2SO4, filtered and concentrated in vacuo. The obtained residue was purified by silica gel column chromatography using gradient elution from heptane to EtOAc. (100:0 to 0:100). The desired fractions were concentrated in vacuo and dried in a vacuum oven at 55C for24 hours yielding compound 80 (130 mg):Compound 100 to 105 were prepared similarly as described for compound 80, using 1-methyl-4-[[(1 S)-2,2,2-trifluoro- 1 -methyl-ethyl]sulfamoyl]pyrrole-2-carboxylic acid instead of 1 -methyl-4-[(3 -methyloxetan-3 -yl)sulfamoyl]pyrrole-2-carboxylic acid and the corresponding aniline instead of 4-fluoro-3 ,5 -dimethylaniline. After addition of the aniline, the mixture was stirred at 50C forhours instead of 24 hours at room temperature.Crude compound 100 was purified by silica gel chromatography heptane-EtOAc 100/0 to 0/100. The product was crystallized from diisopropylether (15 mL)/iPrOH (3.5 mL). The product wasfiltered off, washed with diisopropylether (3x), and dried at 50C in vacuo, resulting in compound 100 (251 mg). MethodA; Rt: 1.98 mi mlz: 489.8 (M-H) Exactmass: 491.0. ?HNMR (400 MHz, DMSO-d6) oe ppm 1.08 (d, J=6.8 Hz, 3 H), 3.84 – 4.00 (m, 4 H), 7.36 (d, J=2.0Hz, 1 H), 7.66 (d, J=1.8 Hz, 1 H), 7.80 – 7.93 (m, 2 H), 8.20 (br. s., 1 H), 10.31 (br. s., 1 H).?9FNMR (377 MHz, DMSO-d6) oe ppm -138.51 –138.34 (m, 1 F), -133.99 –133.81 (m, 1 F), -76.07 (d, J=7.9 Hz, 3 F). Differential scanning calorimetry: From 30 to 300 C at 10C/mm:peak at 199.0 C.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Bromo-4,5-difluoroaniline, and friends who are interested can also refer to it.

Reference:
Patent; JANSSEN R&D IRELAND; VANDYCK, Koen; HACHE, Geerwin, Yvonne, Paul; LAST, Stefaan, Julien; MC GOWAN, David, Craig; ROMBOUTS, Geert; VERSCHUEREN, Wim, Gaston; RABOISSON, Pierre, Jean-Marie, Bernard; WO2014/184350; (2014); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 112734-22-2, name is (4-Bromo-2-fluorophenyl)methanamine, A new synthetic method of this compound is introduced below., Quality Control of (4-Bromo-2-fluorophenyl)methanamine

Step c) 2-[(4-Bromo-2-fluorophenyl)methyl]-1,2,3,4-tetrahydro-1,3-dioxo-4-isoquinolinecarboxylic Acid Methyl Ester To a solution of 3-methoxyl-1-oxo-1H-2-benzopyran-4-carboxylic acid methyl ester (5.0 g, 21.37 mmol) in DMF (100 mL) were added 4-bromo-2-fluorobenzylamine (4.36 g, 21.37 mmol) and Et3 N (5.96 mL, 42.74 mmol). The mixture was stirred at 80 C. for 30 minutes, poured into H2 O (1500 mL), acidified with HCl (2N) and extracted with EtOAc. The organic extracts were dried over MgSO4. Evaporation and crystallization from acetone/hexane (after cooling to -20 C.) gave a white solid (7.6 g, 87.7%, m.p. 149-150 C.). 1 H NMR (DMSO-d6, 400 MHz): delta [3.67 (s), 4.0 (s), 3H, –CO2 Me, tautomeric], [5.06 (q), J=15.4 Hz, 5.30 (s), 2H, –NCH2 –, tautomeric], 5.4 (s), 1H, CH–CO2 Me, tautomeric], 7.07-8.43 (m, 7H, Ar–H, tautomeric). IR (KBr, cm-1): 1670 (CO), 1605 (CO). MS (+FAB): 406 (80, M+ +H), 374 (40, M+ –OCH3). Anal. Calcd.: C, 53.22; H, 3.23; N, 3.45. Found: C, 53.19; H, 2.98; N, 3.4.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; American Home Products Corporation; US5068332; (1991); A;,
Bromide – Wikipedia,
bromide – Wiktionary

Electric Literature of 10016-52-1,Some common heterocyclic compound, 10016-52-1, name is 2,8-Dibromodibenzo[b,d]furan, molecular formula is C12H6Br2O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a two-necked flask were added A-1-1 (2.5 g), B-1 (3.6 g) And sodium tert-butoxide (4.4 g) was added thereto. The flask was filled with di-gassed toluene (46 mL) and heated to 100 C. Pd [P (t-Bu) 3] 2 (200 mg), Pd And the mixture was stirred at the same temperature for 17 hours. Diluted with DCM (100 mL) and filtered through SiO2. The filtered solution was depressurized to remove the solvent, and the residue was dissolved in THF in EA and then recrystallized to obtain A-1 (final) (1.5 g).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2,8-Dibromodibenzo[b,d]furan, its application will become more common.

Reference:
Patent; LG Chem, Ltd.; Lee Chung-hwan; Bae Jae-sun; Lee Jae-cheol; Kim Hwa-gyeong; Shin Ji-yeon; (37 pag.)KR2018/92782; (2018); A;,
Bromide – Wikipedia,
bromide – Wiktionary

Application of 608-30-0, A common heterocyclic compound, 608-30-0, name is 2,6-Dibromoaniline, molecular formula is C6H5Br2N, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

(1) Adding 1 mole of 2,6-dibromoaniline to a four-necked flask,Adding 50% sulfuric acid to the flask, stirring was started, and a 15% aqueous solution of sodium nitrite was added dropwise at a temperature of 0-5 C, and the dropping time was 2 hours.After the dropwise addition is kept for 1 hour, 2,6-dibromoaniline is subjected to diazotization reaction at 0 to 5 C under acidic conditions, and the reaction is completed to obtain a dibromoaniline diazonium salt aqueous solution;The molar ratio of 2,6-dibromoaniline to sodium nitrite is 1:1.05, and the molar ratio of sodium nitrite to sulfuric acid is 1:4;(2) adding hypophosphorous acid to the flask in the dibromoaniline diazonium salt aqueous solution prepared in the step (1), then raising the temperature to 70-80 C, and maintaining the reaction for 3 hours to obtain a mixed solution containing m-dibromobenzene. ; the molar ratio of hypophosphorous acid to 2,6-dibromoaniline is 1.3:1;(3) The mixture obtained in the step (2) is allowed to stand for 30 minutes to be layered, and then the inorganic phase and the organic phase are separated, the organic phase is washed with water, and the inorganic phase and the organic phase are separated by standing. The organic phase can be distilled under reduced pressure to obtain m-dibromobenzene; the calculated yield is over 81%, and the detection purity is over 98%.

The synthetic route of 608-30-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Shandong Tianyi Chemical Co., Ltd.; Tang Xingsan; Xing Xiaohua; Zhang Ming; (6 pag.)CN110078587; (2019); A;,
Bromide – Wikipedia,
bromide – Wiktionary

Application of 5433-01-2, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 5433-01-2, name is 1-Bromo-3-isopropylbenzene, This compound has unique chemical properties. The synthetic route is as follows.

Method 72; 3-Isopropylbenzoic acid; A solution of l-bromo-3-isopropylbenzene (500 mg, 2.51 mmol) in pentane/ether (1:1; 8 ml) was treated with t-butyllithium (1.7 M in pentane, 3.0 ml) at -78 C. The mixture was stirred at -78 0C for 10 min and then CO2 (g) was bubbled into the mixture for several minutes. The reaction was quenched with 10% HCl and extracted with EtOAc. The organic layer was dried with NaCl (sat) then Na2SO4 (s). The solvents were removed under reduced pressure to give a white solid (379 mg, 92%); m/z 166.

The chemical industry reduces the impact on the environment during synthesis 1-Bromo-3-isopropylbenzene. I believe this compound will play a more active role in future production and life.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2006/40568; (2006); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Reference of 112734-22-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 112734-22-2, name is (4-Bromo-2-fluorophenyl)methanamine belongs to bromides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Step 1 : (4-Bromo-2-fluorophenyl)methanamine (924 mg, 4.53 mmol) was dissolved in pyridine and ethane sulfonyl chloride (0.82 mL, 8.60 mmol) was added to the solution at 0 C. The mixture was stirred for 1 h at 0 C. Then, the mixture was quenched with 1 N HCI and extracted with ethyl acetate. Drying over magnesium sulfate and evaporation of the ethyl acetate and purified by column chromatography gave N-(4-bromo-2-fluorobenzyl)- ethanesulfonamide in pure form (1 .06 g, 79 %).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, (4-Bromo-2-fluorophenyl)methanamine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; GRUeNENTHAL GMBH; FRANK, Robert; BAHRENBERG, Gregor; CHRISTOPH, Thomas; LESCH, Bernhard; LEE, Jeewoo; WO2013/45447; (2013); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 1647-26-3, name is 1-Bromo-2-cyclohexylethane, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1647-26-3, SDS of cas: 1647-26-3

To a solution of chloro-6-methyl-2-[2-(methyloxy)phenyl]-4(1 H)-pyrimidinone (0.42g, 1.7 mmoles) in DMF were added lithium hydride (0.027g, 3.4 mmoles), lithium bromide (0.436g, 5.0 mmoles), and 2-cyclohexylethyi bromide (1.6g, 8.4 mmoles). Upon stirring overnight at room temperature, the reaction was quenched with saturated ammonium chloride, extracted with ethyl acetate. The combined organic layers were washed with brine, dried over sodium sulfate, filtered, concentrated in vacuo and the residue purified by flash chromatography (0-30% ethyl acetate/hexane) to afford the desired product (0.23g, 38%). Subsequent deprotection using BBr3 was accomplished to produce the title compound (0.2g, 90%). MS (m/z): 347.2 [M+ H]+.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; SMITHKLINE BEECHAM CORPORATION; WO2007/62370; (2007); A2;,
Bromide – Wikipedia,
bromide – Wiktionary

Related Products of 69038-76-2,Some common heterocyclic compound, 69038-76-2, name is 4-Bromo-N1-methylbenzene-1,2-diamine, molecular formula is C7H9BrN2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 4-bromo-N?-methylbenzene-1,2-diamine (1.7 g, 8 mmol) in triethyl orthoformate (10 mL) was added PTSA?H20 (152 mg, 0.8 mmol). The mixture was stirred at 85 C for 2 h, poured into H20 (50 mL) and extracted with EA (40 mL x 2). The organic layers were dried over anhydrous Na2SO4, filtered, concentrated in vacuo, and purified by silica gel column chromatography (PE/EA = 50/1 to 10/1) to afford 5-bromo-1-methyl-1H-benzo[djimidazole (1.5 g, 89 %) as a yellow solid. LC-MS mlz: 211.1 [M+Hf?. tR= 1.90 mm.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Bromo-N1-methylbenzene-1,2-diamine, its application will become more common.

Reference:
Patent; LYSOSOMAL THERAPEUTICS INC.; SKERLJ, Renato, T.; BOURQUE, Elyse Marie Josee; LANSBURY, Peter, T.; GOOD, Andrew, C.; (391 pag.)WO2017/176960; (2017); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7745-91-7, name is 3-Bromo-4-methylaniline belongs to bromides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. category: bromides-buliding-blocks

General procedure: 1-Aryl-4-nitro-1H-imidazoles were prepared following the general procedure we have developed in our laboratory [23] with some slight modifications. Equimolar amount of aniline derivative was treated with 1,4-dinitro-1H-imidazole in aqueous methanol at ambient temperature in the dark for several hours until complete disappearance of 1,4-dinitro-1H-imidazole monitored by TLC. In some cases, the mixture was heated under reflux to complete the reaction. On cooling, the desired crude 1-aryl-4-nitro-1H-imidazoles separated from the mixture by precipitation. After filtration and recrystallization the pure product was obtained. Yields, solvents used for recrystallization and specific data are given below in the respective sections. Further details are available on request.

The synthetic route of 7745-91-7 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Trunz, Bernadette Bourdin; Jdrysiak, Rafa?; Tweats, David; Brun, Reto; Kaiser, Marcel; Suwi?ski, Jerzy; Torreele, Els; European Journal of Medicinal Chemistry; vol. 46; 5; (2011); p. 1524 – 1535;,
Bromide – Wikipedia,
bromide – Wiktionary