Month: September 2021

Adding a certain compound to certain chemical reactions, such as: 771-14-2, name is 2-Bromonaphthalen-1-amine, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 771-14-2, Application In Synthesis of 2-Bromonaphthalen-1-amine

General procedure: To a solution of 2-bromoaniline (1.0 equiv.) and N,N-diisopropylethylamine (2.4 equiv.) in toluene was added cis-1,4-dichlorobut-2-ene (1.8 equiv.). The mixture was stirred at reflux until complete consumption monitored by TLC. The reaction was cooled to room temperature, diluted with water, and extracted with EtOAc. The combined organic layers were washed with saturated NaCl solution and dried over Na 2 SO 4 . The solvents were removed under reduced pressure, purified by flash chromatography to give the pure or crude desired product 3. The product 3 was dissolved in anhydrous THF, then was cooled to -78 oC, n-BuLi (1.2 equiv., 2.5 mol/L in n-hexane) was added dropwise to the mixture and keep temperature no more than -50 oC, the mixture was stirred for 30 minutes, (COOR3) 2 (1.0-1.2 equiv.) in THF was added dropwise at -78 oC and stirred at -78 oC for 2 h. The reaction was warmed to room temperature slowly, then quenched with saturated NH 4 Cl solution, and extracted with EtOAc. The combined organic layers were washed with saturated NaCl solution and dried over Na 2 SO 4 . The solvents were removed under reduced pressure, purified by flash chromatography to give the desired product 1.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Bromonaphthalen-1-amine, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Du, Hong-Jin; Lin, Chao; Wen, Xiaoan; Xu, Qing-Long; Tetrahedron; vol. 74; 52; (2018); p. 7480 – 7484;,
Bromide – Wikipedia,
bromide – Wiktionary

1435-54-7, name is 1,3-Dibromo-2-fluorobenzene, belongs to bromides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Quality Control of 1,3-Dibromo-2-fluorobenzene

General procedure: Scheme 4-1: In Step 1 the appropriately substituted dibromo species is coupled with an appropriate boronic acid as known in the art to form a mixture of biaryl and triaryl products from which the desired biaryl compound is isolated. In Step 2 the appropriately substituted biaryl species is converted to the Grignard reagent with activated magnesium. In Step 3 the appropriately substituted aldehyde is treated with the previously prepared Grignard reagent to form an alcohol. In Step 4 the appropriately substituted alcohol is converted to a bromide as known in the art with carbon tetrabromide and triphenyl phosphine. In Step 5 the appropriately substituted bromide is converted to the Grignard reagent with activated magnesium.

The synthetic route of 1435-54-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ACHILLION PHARMACEUTICALS, INC.; WILES, Jason, Allan; PHADKE, Avinash, S.; DESHPANDE, Milind; AGARWAL, Atul; CHEN, Dawei; GADHACHANDA, Venkat, Rao; HASHIMOTO, Akihiro; PAIS, Godwin; WANG, Qiuping; WANG, Xiangzhu; GREENLEE, William; (340 pag.)WO2017/35415; (2017); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7745-91-7, name is 3-Bromo-4-methylaniline, A new synthetic method of this compound is introduced below., HPLC of Formula: C7H8BrN

3-Bromo-4-methylaniline (30.4 g) was dissolved in methanol (210 mL), pyridine (43 mL) and iodine (68.4 g) were added, and the mixture was stirred at 25C for two hours. A 20% aqueous sodium thiosulfate solution (150 mL) and water (30 mL) were added to the reaction solution and the mixture was stirred at 25C for one hour. Washing with methanol/water (1/1, 100 mL) resulted in the target compound (19.1 g).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Chugai Seiyaku Kabushiki Kaisha; F. Hoffmann-La Roche AG; EBIIKE, Hirosato; AOKI, Toshihiro; CHIBA, Takashi; KOCHI, Masami; NAKAMA, Kimitaka; NIIZUMA, Satoshi; NISHII, Hiroki; OHWADA, Jun; SHIMAMURA, Hiroyuki; SUGE, Aiko; NAKANISHI, Yoshito; KOBAYASHI, Natsuki; (594 pag.)EP3312172; (2018); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1647-26-3, name is 1-Bromo-2-cyclohexylethane, A new synthetic method of this compound is introduced below., Quality Control of 1-Bromo-2-cyclohexylethane

General procedure: The alkyl bromide (1.0 equiv) was added to a solution of mercaptoaceticacid (1.0 equiv) in methanol (10.0 mL) and the resultingsolution stirred. Then a solution of NaOH (2.0 equiv) in methanol(5.0 mL)was added slowly, and the final mixturewas stirred at roomtemperature or heated to reflux until absence of the alkyl bromide(checked by TLC). The reaction mixture was concentrated in vacuo,diluted with H2O, and neutralized with 1 N HCl. Then the obtainedreaction mixture was extracted with EtOAc. The combined organicfractions were washed with brine, dried with Na2SO4, and concentratedin vacuo. Purification of the crude residue by column chromatography(petroleum ether/EtOAc) afforded the title compound.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Chen, Ying; Wu, Bolin; Hao, Yameng; Liu, Yunqi; Zhang, Zhili; Tian, Chao; Ning, Xianling; Guo, Ying; Liu, Junyi; Wang, Xiaowei; European Journal of Medicinal Chemistry; vol. 171; (2019); p. 420 – 433;,
Bromide – Wikipedia,
bromide – Wiktionary

Related Products of 167355-41-1,Some common heterocyclic compound, 167355-41-1, name is 6-Bromo-1,2,3,4-tetrahydronaphthalen-2-amine, molecular formula is C10H12BrN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Di-tert-butyl dicarbonate (1.030 g, 4.719 mmol) was added to a stirred RT solution of 6-bromo-1,2,3,4-tetrahydro-naphthalen-2-ylamine (0.970 g, 4.290 mmol) in CH2Cl2 (100 mL). TEA (0.897 mL, 6.435 mmol) was added to the reaction and the mixture was stirred at RT until HPLC analysis showed complete consumption of starting material. The reaction was diluted with CH2Cl2, washed with saturated aqueous NaHCO3, dried over MgSO4 and concentrated in vacuo to afford the crude material. The crude was purified by flash column chromatography to yield the title compound. MS (APCI pos) 269 (M-t-Bu).

The synthetic route of 167355-41-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Amgen Inc.; Array Biopharma, Inc.; US2005/234044; (2005); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 656-64-4, name is 3-Bromo-4-fluoroaniline, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 656-64-4, 656-64-4

N-Hydroxy-4-((2-methoxyethyl)amino)-1,2,5-oxadiazole-3-carbimidoyl chloride (1.5 kg, 6.8mol) was mixed with water (10 L). The mixture was heated to 60C. 3-Bromo-4-fluoroaniline (1.44 kg, 7.46 mol) was added and stirred for 10 mm. A warm sodium bicarbonate (0.86 kg, 10 mol)solution (10 L water) was added over 15 mm. The reaction mixture was stirred at 60C for 20 mm. The reaction mixture was cooled to room temperature and extracted with EtOAc (10 L*2). The combined organic solution was dried over sodium sulfate and concentrated to give the desired product (2.3 kg, 90%) as a brown solid. LCMS (M + H) : m / z = 374.0, 376.0. 1H NMR (400MHz, DMSO-d6): 6 11.55 (s, 1H), 8.85 (s, 1H), 7.16 (t, J = 8. 8Hz, 1H), 7.08 (dd, J = 6.1, 2.7Hz, 1H), 6.75 (m,1H), 6.14 (t, J = 5.8Hz, 1H), 3.48 (t, J = 5.2Hz, 2H), 3.35 (dd, J = 10.8, 5.6Hz, 2H), 3.22 (s, 3H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Bromo-4-fluoroaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY DEVELOPMENT LIMITED; KAZMIERSKI, Wieslaw Mieczyslaw; DE LA ROSA, Martha; SAMANO, Vincent; (70 pag.)WO2017/2078; (2017); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Some common heterocyclic compound, 4549-33-1, name is 1,9-Dibromononane, molecular formula is C9H18Br2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C9H18Br2

2,2,12,12-Tetramethyltridecanedioic acid diethyl ester (153). Under N2 atmosphere and at -78 C., a solution of lithium diisopropylamide (2 M in heptane/THF/ethylbenzene, 52.5 mL, 105 mmol) was added dropwise to a solution of ethyl isobutyrate (17.4 g, 150 mmol) in THF (50 mL). The mixture was stirred for 1 h and 1,9-dibromononane (151, 14.3 g, 50 mmol) was added, followed by DMPU (4.4 g, 34.3 mmol). The mixture was stirred for 30 min and the cooling bath was removed. After 30 min, the THF was evaporated under reduced pressure. The residue was diluted with saturated NH4Cl solution (300 mL) and extracted with ethyl acetate (3*100 mL). The combined organic layers was washed with brine (200 mL), 5% aqueous HCl (100 mL) and saturated NaHCO3 solution (50 mL), and dried over Na2SO4. The solvent was removed under reduced pressure and the residue was distilled in high vacuo to give 153 (14.0 g, 79%) as an oil. Bp 150-151 C./0.1 mmHg. 1H NMR (CDCl3): delta (ppm): 4.08 (q, J=7.2, 4H), 1.48-0.98 (m, 18H), 1.21 (t, J=7.2, 6H), 1.12 (s, 12H). 13C NMR (CDCl3): delta (ppm): 178.1, 60.0, 42.1, 40.7, 30.0, 29.4, 25.1, 24.8, 14.2.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4549-33-1, its application will become more common.

Reference:
Patent; Dasseux, Jean-Louis Henri; Oniciu, Carmen Daniela; US2004/192771; (2004); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 61613-22-7, name is 2-Bromo-N-phenylaniline, A new synthetic method of this compound is introduced below., COA of Formula: C12H10BrN

To obtain the D1-DPS, compound 1a of the -OH formationreaction, and compound 2 of the cyclization reactionwere synthesized. Compound 1 (3 g, 12 mmol) was dissolvedin 50 ml of anhydrous tetrahydrofuran (THF) underhigh purity argon in a one neck round bottom flask. It wascooled to -78 C using solid carbon with acetone and then n-butyllithuim (2.5 M in cyclohexane, 24.7 mmol)was added dropwise slowly. Stirring was continued for 1 h before, cooling for 20-30 min. Then a solution of9-fluorenone (2.4 g, 13.3 mmol) in THF was added at-78 C under an argon atmosphere. The mixture wasstirred for 3 h in the same environment. The reaction was completed after the confirmation of compound 1a. Two side products and reactants appeared by TLC with a solutionof hexane and ethyl acetate (10:1). Additional quenching was not required. The mixture was then worked up using water and dichloromethane. The extracted organiclayer was dried by anhydrous MgSO4. For compound 2, compound 1a was placed in a oneneckround bottom flask, to which, chloroform (10 ml)and methane sulfonic acid (MSA, 5 ml) were added whilestirring at room temperature for 15 min. The progress ofthe reaction was monitored by TLC with a solution of hexane and ethyl acetate (5:1). The resulting mixture wasquenched by saturated aqueous NaHCO3 and extractedwith dichloromethane after the reaction completed. Th esolid product was recrystallized using chloroform and hexane.A slightly yellow solid product was obtained, whichwas then purified by column chromatography with hexane and ethyl acetate.Two intermediates, the DPS acceptor and the compound 2 donor, were reacted for D1-DPS by theBuchwald-Hartwig amination. Compound 2 (0.5 g,1.38 mmol), DPS (0.48 g, 1.38 mmol), pd(dba)2 (0.008 g,0.014 mmol), t-BuONa (0.27 g, 2.77 mmol), and triphenylphosphine(0.003 g, 0.011 mmol) showed high purityAr charging. Then toluene (20 ml) was added and refluxedfor 5 h at 115 C. Quenching was not required. The resultingmixture was worked up using ethyl acetate and water.A small amount of water in the extracted organic layerwas removed by MgSO4 and filtered with celite to removethe inorganic materials. Finally, column chromatographywas applied with hexane and dichloromethane.The white solid product was recrystallized byhexane.

The synthetic route of 61613-22-7 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Lee, In Hye; Kim, Ki Ju; Kim, Young Kwan; Kim, Young Sik; Shin, Dong Myung; Journal of Nanoscience and Nanotechnology; vol. 19; 8; (2019); p. 4583 – 4589;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 327-52-6, A common heterocyclic compound, 327-52-6, name is 1-Bromo-2,4,5-trifluorobenzene, molecular formula is C6H2BrF3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

4.2 mL of 1-bromo-2,4,5-trifluorobenzene and 10.8 mL of tetrahydrofuran were added to 50 mL flask and the resulting reaction solution was cooled to 0 C. 15 mL of isopropylmagnesium chloride [2.0 M tetrahydrofuran solution] was dropped to the reaction solution under nitrogen atmosphere and stirred for 30 minutes to produce Grinard reagent. 1.95 g of (S)-t-butyl 2-(2-t-butoxy-2-oxoethyl)aziridine-1-carboxylate and 50 mL of tetrahydrofuran were added to another 250 mL flask and the resulting reaction solution was cooled to 0 C. And then, 778 mg of copper (I) bromide dimethylsulfide complex was added. 22.7 mL of the Grinard reagent produced under nitrogen atmosphere was dropped, and stirred for 6 hours while the reaction temperature was maintained at 0 C. After completing the reaction, 50 mL of ammonium chloride aqueous solution was dropped to the reaction solution; 100 mL of ethyl acetate and 50 mL of water were added and then stirred for 10 minutes. An organic layer was isolated, dehydrated with magnesium sulfate, and then concentrated under reduced pressure. A concentrated residue was isolated with column chromatography (n-hexane:ethyl acetate=20:1) and then concentrated under reduced pressure to obtain 2.62 g of a title compound. 1H NMR (CDCl3, 400 MHz) delta 7.02 (m, 1H), 6.87 (m, 1H), 5.11 (br, 1H), 4.07 (br, 1H), 2.82 (dd, 1H), 2.77 (dd, 1H), 2.45 (dd, 1H), 2.35 (dd, 1H), 1.44 (s, 9H), 1.35 (s, 9H)

The synthetic route of 327-52-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; DONG-A PHARMACEUTICAL. CO., LTD; US2012/16126; (2012); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 955959-84-9, name is 4-(4-Bromophenyl)dibenzo[b,d]furan, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 955959-84-9, 955959-84-9

6.3 g (15.4 mmol) of N-phenyl-3,3-bicarbazole, 5.0 g (15.4 mmol) of 4-(4-bromophenyl)dibenzo[b,d]furan, 3.0 g (30.7 mmol) of sodium t-butoxide, 0.9 g (1.5 mmol) of tris(dibenzylideneacetone)dipalladium, and 1.2 mL of tri t-butylphosphine (50% in toluene) were mixed with 100 mL of xylene in a 250 mL round flask, and the mixture was heated and refluxed under a nitrogen flow for 15 hours. The obtained mixture was added to 300 mL of methanol, and a solid crystallized therein was filtered, dissolved in dichlorobenzene, filtered with silica gel/Celite, and after removing an appropriate amount of an organic solvent, recrystallized with methanol to obtain Compound B-78 (7.3 g, a yield of 73%). (0183) calcd. C48H30N2O: C, 88.59; H, 4.65; N, 4.30; O, 2.46. found: C, 88.56; H, 4.62; N, 4.20; 0, 2.43.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-(4-Bromophenyl)dibenzo[b,d]furan, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SAMSUNG SDI CO., LTD.; JUNG, Ho Kuk; LUI, Jinhyun; KIM, Dong-Yeong; JANG, Kipo; HUH, Dal-Ho; YU, Eun Sun; JUNG, Sung-Hyun; (75 pag.)US2019/280211; (2019); A1;,
Bromide – Wikipedia,
bromide – Wiktionary