Author: Jessica.F

3638-73-1, name is 2,5-Dibromoaniline, belongs to bromides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Formula: C6H5Br2N

The 2,5-dibromo-aniline (3.74g, 14.9mmol), 4- methoxycarbonyl phenyl boronic acid (8.08g, 44.9mmol), palladium acetate (240mg, 1.07mmol) placed in 250mL round bottom flask, then added 40mLN , of N- dimethylformamide solvent, the addition of sodium carbonate (5.66g, 44.9mmol) was dissolved in 46mL of water dubbed aqueous sodium carbonate, aqueous sodium carbonate was added to the above 250mL round bottom flask. Then under nitrogen at a temperature of 60 , 18 hours. After the reaction was cooled to room temperature, suction filtered and washed with copious amounts of water. With ethyl acetate (100mL × 3) after the spin dry the solid solvent extraction, and finally washed with acetone to give the product as a gray solid.

The synthetic route of 3638-73-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Wuhan University; Wang, Cheng; Meng, Xiangshi; Gui, Bo; (12 pag.)CN105503929; (2016); A;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 1435-51-4, A common heterocyclic compound, 1435-51-4, name is 1,3-Dibromo-5-fluorobenzene, molecular formula is C6H3Br2F, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Palladium reagents were synthesized following the scheme of Figure 14 for generalprocedure A. In a nitrogen-filled glovebox, an oven-dried scintillation vial (1 0 mL), whichwas equipped with a magnetic stir bar and fitted with a Teflon screwcap septum, vascharged with RuPhos (2.5 equiv), a dihaloaryl compound (1 equiv) and cydohexane (1.2mL). Solid [(1,5-COD)Pd(CH2Si:Me3)] (2.5 equiv) was added rapidly in one portion and theresulting solution vvas stirred for 16 hat Jt. After this time, pentane (3 mL) was added andthe resulting mixture vas placed into a -20 C freezer for 3 h. The vial was then takenoutside of the glove box, and the resulting precipitate was filtered, washed with pentane (3 X3 mL), and dried under reduced pressure to afford the oxidative addition complex (Figure14)

The synthetic route of 1435-51-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MASSACHUSETTS INSTITUTE OF TECHNOLOGY; BUCHWALD, Stephen, L.; PENTELUTE, Bradley, L.; ZHANG, Chi; (170 pag.)WO2017/151910; (2017); A2;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 10269-01-9, name is (3-Bromophenyl)methanamine, A new synthetic method of this compound is introduced below., COA of Formula: C7H8BrN

To a solution of commercially available 3-bromo-benzylamine (938 mg) in dry dichloromethane (10 mL) was added added di-tert-butyl dicarbonate (1.10 g). The resulting clear solution was stirred at room temperature for 15 h and then concentrated to afford the title compound (1.42 g; 99%). [(M-isobutene)H]+=230/232, [MNa]+=308/310.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Alantos Pharmaceuticals, Inc.,; US2006/173183; (2006); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Reference of 61326-44-1,Some common heterocyclic compound, 61326-44-1, name is 1,1,2,2-Tetrakis(4-bromophenyl)ethene, molecular formula is C26H16Br4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The present invention is preferably 1,1,2,2-tetrakis(4-bromophenyl)ethylene: 1H-1,2,4-triazole: potassium carbonate: copper oxide molar ratio of 2: 10-15: 30: 1; Reaction temperature of 100 deg.C. The reaction time was 48 hours. In a polar solvent, using the “one-pot method”, 1,1,2,2-tetrakis(4-bromophenyl)ethylene,1H-1,2,4-triazole, potassium carbonate and copper oxide under heating conditions 1,1,2,2-tetrakis[4-(1H-1,2,4-triazol-1-yl)phenyl]ethylene (L) is prepared. Yield 60percent.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1,1,2,2-Tetrakis(4-bromophenyl)ethene, its application will become more common.

Reference:
Patent; Tianjin Normal University; Wang, Ying; (12 pag.)CN105669705; (2016); A;,
Bromide – Wikipedia,
bromide – Wiktionary

52997-43-0, name is 7-(Bromomethyl)pentadecane, belongs to bromides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Safety of 7-(Bromomethyl)pentadecane

Di-tert-butyl thieno[3,2-b]thiophene-3,6-diyldicarbamate (20) (0.93 g, 2.5 mmol, 1.0 e.q.) wasdissolved in DMF (25 mL) and cooled to 0C. Sodium hydride (0.40 g, 60% dispersion in mineral oil, 10.0 mmol, 4.0 e.q.) was added and the solution was stirred at room temperature for 1hour. 7-(bromomethyl)pentadecane (2.29 g, 7.5 mmol, 3.0 e.q.) was added to the mixture and the solution was stirred at 80C for 3 hours. After the solution cooled to room temperature, the mixture was poured into iced water, followed by extraction with ethyl acetate for three times.The organic layers were combined, washed with water, brine and then dried over Mg504, concentrated. The resulting brown oil was purified via silica gel column chromatography with di15 chloromethane/petroleum ether (1:1) as the eluentto give di-tert-butyl thieno[3,2-b]thiophene-3,6-diylbis((2-hexyldecyl)carbamate) as a light brown oil (21) (1.64 g, 2.0 mmol, 80 % yield). 1HNMR (400 MHz, CDCI3) 67.04 (s, 2H), 3.62 (d, J= 7.2 Hz, 4H), 1.58-1.48 (m, 2H), 1.34-1.11(m, 48H), 0.87 (q, J= 6.8 Hz, 12H). 13C NMR (101 MHz, CDCI3) 6 154.13, 134.76, 133.70,119.18, 80.64, 53.38, 36.93, 31.90, 31.77, 31.21, 30.03, 29.68, 29.52, 29.29, 28.15, 26.31,26.25, 22.66, 22.62, 14.08.

The synthetic route of 52997-43-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BASF SE; FLORES, Jean-Charles; HAYOZ, Pascal; MCCULLOCH, Iain; ONWUBIKO, Nkechinyerem; KAELBLEIN, Daniel; (65 pag.)WO2017/148864; (2017); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Related Products of 583-70-0, A common heterocyclic compound, 583-70-0, name is 2,4-Dimethylbromobenzene, molecular formula is C8H9Br, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A dried round-bottom flask containing stir bar was charged with magnesium (530 mg, 21.70 mmol), small piece of iodine and dry THF (73 mL) was added under argon. Solution of 1-bromo-2,4-dimethylbenzene (3.65 g, 19.72 mmol) diluted in dry THF (3 mL) was added dropwise to the suspension and the solution was stirred at 50C for 60 mm. After the formation of Grignard reagent,_the_reaction_mixture_was_cooled_to_0C,_and_then_N-[(3-chlorophenyl)methylidene]-2-methylpropane-2-sulfinamide Ex.83a (3.37 g, 13.81 mmol) in dryTHF (3 mL)was added dropwise. The resulting mixture was stirred at rt. After the completion of the reaction, the reaction mixture was quenched with sat. NH4CI and the solution was extracted with EtOAc. The combined organic layers were washed with brine. After phases separation, the organic layer was dried over MgSO4, filtered and the solution was concentrated under reduced pressure. The crude material was purified by column chromatography on silica gel eluting with a gradient of Hexanes/EtOAc from [90:10] to [60:40] to afford N-[(3-chlorophenyl)(2,4-dimethylphenyl)methyl]-2- methylpropane-2-sulfinamide Ex.83b (2.30 g, 48%) as yellow oil. 1 H NMR (400 MHz, DMSO-d6, din ppm): 1.11 (s, 9H), 2.22 (s, 3H), 2.26 (s, 3H), 5.67 (d, 1H, J=6.3Hz), 6.03 (d, 1H, J=6.3Hz), 6.98 (s, 1H), 7.04 (d, 1H, J=8.OHz), 7.19-7.27 (m, 1H), 7.26-7.40 (m, 4H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; GENFIT; DELHOMEL, Jean-Francois; PERSPICACE, Enrico; MAJD, Zouher; PARROCHE, Peggy; WALCZAK, Robert; (284 pag.)WO2018/138362; (2018); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Some common heterocyclic compound, 2044-08-8, name is 1-Bromocyclohex-1-ene, molecular formula is C6H9Br, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C6H9Br

Under nitrogen protection, 20 g (0.12 mol) of 1-bromo-1-cyclohexene and 34.7 g (0.14 mol) of pinacol borate were added to the three-necked flask.2.0 g (6 mol%) of triphenylphosphine,2.6 g (3 mol%) of trans-bis(triphenylphosphine)palladium(II) dichloride,Potassium phenolate 24.6 g (0.19 mol) and anhydrous toluene 250 mL.After nitrogen substitution, the reaction was stirred at 50 C for 5 hours.The system was then cooled to room temperature and quenched with water.The reaction mixture was extracted with a benzene solvent and brine.The organic phase was dried over anhydrous magnesium sulfate.The dried mixture was filtered and concentrated under reduced pressure.Purified by silica gel column or distillation21.9 g (yield: 85%) cyclohexene-1-boronic acid pinacol ester.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2044-08-8, its application will become more common.

Reference:
Patent; Yurui (Shanghai) Chemical Co., Ltd.; Zheng Xianzhe; (52 pag.)CN109206458; (2019); A;,
Bromide – Wikipedia,
bromide – Wiktionary

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 2695-47-8 as follows. Quality Control of 6-Bromo-1-hexene

Step 1: Preparation of 2,2,2-trifluoro-iV-(hex-5-enyl)-N-rnethylacetarnide 11a; Sodium hydride (60% dispersion in mineral oil, 31.5 g, 1.28 eq.) was slowly added under nitrogen atmosphere to a solution of N-methyl-2,2,2-trifluoroacetamide (100 g, 1.28 eq.) in DMF (500 mL) at 0 0C. The reaction mixture was stirred for 90 min at 0 0C, and then 6- bromo-1-hexene (100 g, 1 eq.) was added dropwise over 45 min. The reaction mixture was allowed to warm up to room temperature, and stirred for 3 days at room temperature. The reaction mixture was then poured into water and extracted tree time with EtOAc. The combined organics layers were dried over anhydrous sodium sulphate and concentrated under reduced pressure. The residue was purified by flash chromatography on silica gel to produce compound 11a as colorless oil in 56% yield.1H NMR (DMSO-^5, 400 MHz) delta 1.27-1.38 (m, 2H), 1.48-1.60 (m, 2H), 2.00-2.06 (m, 2H), 2.93-3.07(2m, 3H), 3.35-3.40 (m, 2H), 4.92-5.04 (m, 2H), 5.73-5.83 (m, IH).

According to the analysis of related databases, 2695-47-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; IDENIX PHARMACEUTICALS, INC.; WO2009/14730; (2009); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 51436-99-8, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 51436-99-8 name is 4-Bromo-2-fluorotoluene, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Dried magnesium turnings (4.24 g, 0.55 mole) were stirred with a heavy stirrer bar under argon for 16 hours. A few crystals of iodine were added followed by a solution of 4-bromo-2- fluorotoluene (94.5 g, 0.5 mole) in tetrahydrofuran [THF] (200 ml). This addition took place over about 40 minutes and the solution was allowed to reflux during the addition. The resulting solution was stirred for 1 hour. 4-Bromobenzaldehyde (71.7 g 0.39 mole) in THF (200 ml) was cooled to 0C then treated with the above Grignard solution. The addition of the Grignard solution took place over 30 minutes and the resulting solution was stirred for 2 hours at room temperature. The reaction mixture was poured slowly into a solution of potassium sodium tartrate (10% solution, 1 L) and extracted with ethyl acetate (EtOAc). The organic solution was dried with brine and sodium sulfate and evaporated. Trituration with hexane gave the title compound (D1) as a white solid (71.8 g, 65%).’H NMR: 8 CDCI3 2.20 (1H, d), 2.24 (3H, m), 5.75 (1H, d), 6.98 (1H, s) 7.05 (1H, m), 7.16 (1H, m), 7.24 (2H, m) 7.47 (2H, m).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-Bromo-2-fluorotoluene, and friends who are interested can also refer to it.

Reference:
Patent; GLAXO GROUP LIMITED; WO2005/51397; (2005); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 6911-87-1, name is 4-Bromo-N-methylaniline, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 6911-87-1, Computed Properties of C7H8BrN

General procedure: To a solution of bromobenzoyl chloride (2 mmol) was added the corresponding N-methylaniline (2 mmol) followed by Et3N (2 mmol) in CH2Cl2 (10 mL) at 0 C. After a few minutes, the ice bath was removed and the reaction mixture was warmed up to room temperature and stirred at room temperature overnight. The reaction mixture was extracted twice with CH2Cl2 (2 × 15 mL). The organic layer was dried over MgSO4, filtered and the solution was concentrated under reduced pressure. The residue was purified by silica gel column chromatography using hexanes and EtOAc as eluent or by trituration in a mixture of diethyl ether / petroleum ether to afford the desired compound.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Gargano, Emanuele M.; Allegretta, Giuseppe; Perspicace, Enrico; Carotti, Angelo; Van Koppen, Chris; Frotscher, Martin; Marchais-Oberwinkler, Sandrine; Hartmann, Rolf W.; PLoS ONE; vol. 10; 7; (2015);,
Bromide – Wikipedia,
bromide – Wiktionary