Zhang, Wenli’s team published research in ChemSusChem in 2020 | CAS: 623-24-5

1,4-Bis(bromomethyl)benzene(cas: 623-24-5) belongs to organobromine compounds.Depending on the type of carbon to which the bromine is bonded, organic bromide could be alkyl, alkenyl, alkynyl, or aryl. SDS of cas: 623-24-5 Alkyl bromides are mainly used as alkylating agents and also find application as a solvent to extract oil from seeds and wool.

《Imidazolium-Functionalized Ionic Hypercrosslinked Porous Polymers for Efficient Synthesis of Cyclic Carbonates from Simulated Flue Gas》 was written by Zhang, Wenli; Ma, Fangpei; Ma, Long; Zhou, Yu; Wang, Jun. SDS of cas: 623-24-5 And the article was included in ChemSusChem in 2020. The article conveys some information:

The rapid growth of CO2 emissions, especially from power plants, has led to the urgent need to directly capture and fix CO2 in the flue gas after simple purification rather than energy-intensive gas separation Herein, imidazolium-functionalized ionic hypercrosslinked porous polymers (HCPs) bearing adjustable surface groups were straightforwardly synthesized through co-hypercrosslinking of benzylimidazole salts and crosslinker through Friedel-Crafts alkylation. Abundant microporosity and relatively high ionic moieties were obtainable in the ethyl-group-tethered ionic HCP, giving a remarkably selective CO2 capture performance with a CO2 uptake of 3.05 mmol g-1 and an ideal adsorbed solution theory (IAST) CO2/N2 selectivity as high as 363 (273 K, 1 bar). This ionic polymer demonstrated high efficiency in the synthesis of cyclic carbonates from the coupling of various epoxides with the simulated flue gas (15% CO2 and 85% N2), giving high yields, large turnover numbers (up to 4800), and stable reusability under additive- and solvent-free conditions. In the experimental materials used by the author, we found 1,4-Bis(bromomethyl)benzene(cas: 623-24-5SDS of cas: 623-24-5)

1,4-Bis(bromomethyl)benzene(cas: 623-24-5) belongs to organobromine compounds.Depending on the type of carbon to which the bromine is bonded, organic bromide could be alkyl, alkenyl, alkynyl, or aryl. SDS of cas: 623-24-5 Alkyl bromides are mainly used as alkylating agents and also find application as a solvent to extract oil from seeds and wool.

Referemce:
Bromide – Wikipedia,
bromide – Wiktionary

Travagin, Fabio’s team published research in Synlett in 2020 | CAS: 5437-45-6

Benzyl 2-bromoacetate(cas: 5437-45-6) belongs to benzyl acetate. Benzyl acetate is an aromatic chemical, usually appearing as a clear liquid with a moderate sweet-jasmine fragrance. This compound appears as a component of some of our fragrance blends.Recommanded Product: 5437-45-6

《Synthesis of Two Novel Mixed Bifunctional Chelating Agents: DO2AP(tBu)4 and DO3AP(tBu)4》 was written by Travagin, Fabio; Biondi, Luca; Lattuada, Luciano; Giovenzana, Giovanni B.. Recommanded Product: 5437-45-6 And the article was included in Synlett in 2020. The article conveys some information:

A convenient synthesis of two novel macrocyclic bifunctional chelating agents (BFCAs) I (R = H, carboxymethyl), formally derived from the well-known ligands DO3A and DOTA by selective replacement of one carboxymethyl side arm with a phosphonomethyl residue, is reported. The results came from multiple reactions, including the reaction of Benzyl 2-bromoacetate(cas: 5437-45-6Recommanded Product: 5437-45-6)

Benzyl 2-bromoacetate(cas: 5437-45-6) belongs to benzyl acetate. Benzyl acetate is an aromatic chemical, usually appearing as a clear liquid with a moderate sweet-jasmine fragrance. This compound appears as a component of some of our fragrance blends.Recommanded Product: 5437-45-6

Referemce:
Bromide – Wikipedia,
bromide – Wiktionary

Qi, Ji’s team published research in Chemical Science in 2020 | CAS: 3141-27-3

2,5-Dibromothiophene(cas: 3141-27-3) , is mainly used as pharmaceutical intermediate and synthesis intermediate. 2,5-Dibromothiophene may be used as starting reagent for the synthesis of α,α′-didecylquater-, -quinque- and -sexi-thiophenes.Recommanded Product: 2,5-Dibromothiophene

《Simultaneously boosting the conjugation, brightness and solubility of organic fluorophores by using AIEgens》 was written by Qi, Ji; Duan, Xingchen; Cai, Yuanjing; Jia, Shaorui; Chen, Chao; Zhao, Zheng; Li, Ying; Peng, Hui-Qing; Kwok, Ryan T. K.; Lam, Jacky W. Y.; Ding, Dan; Tang, Ben Zhong. Recommanded Product: 2,5-Dibromothiophene And the article was included in Chemical Science in 2020. The article conveys some information:

Organic near-IR (NIR) emitters hold great promise for biomedical applications. Yet, most organic NIR fluorophores face the limitations of short emission wavelengths, low brightness, unsatisfactory processability, and the aggregation-caused quenching effect. Therefore, development of effective mol. design strategies to improve these important properties at the same time is a highly pursued topic, but very challenging. Herein, aggregation-induced emission luminogens (AIEgens) are employed as substituents to simultaneously extend the conjugation length, boost the fluorescence quantum yield, and increase the solubility of organic NIR fluorophores, being favorable for biol. applications. A series of donor-acceptor type compounds with different substituent groups (i.e., hydrogen, Ph, and tetraphenylethene (TPE)) are synthesized and investigated. Compared to the other two analogs, MTPE-TP3 with TPE substituents exhibits the reddest fluorescence, highest brightness, and best solubility Both the conjugated structure and twisted conformation of TPE groups endow the resulting compounds with improved fluorescence properties and processability for biomedical applications. The in vitro and in vivo applications reveal that the NIR nanoparticles function as a potent probe for tumor imaging. This study would provide new insights into the development of efficient building blocks for improving the performance of organic NIR emitters. After reading the article, we found that the author used 2,5-Dibromothiophene(cas: 3141-27-3Recommanded Product: 2,5-Dibromothiophene)

2,5-Dibromothiophene(cas: 3141-27-3) , is mainly used as pharmaceutical intermediate and synthesis intermediate. 2,5-Dibromothiophene may be used as starting reagent for the synthesis of α,α′-didecylquater-, -quinque- and -sexi-thiophenes.Recommanded Product: 2,5-Dibromothiophene

Referemce:
Bromide – Wikipedia,
bromide – Wiktionary

Louwsma, Jeroen’s team published research in Polymer in 2021 | CAS: 2623-87-2

4-Bromobutanoic acid(cas: 2623-87-2) belongs to carboxylic acids. The chief chemical characteristic of the carboxylic acids is their acidity. They are generally more acidic than other organic compounds containing hydroxyl groups but are generally weaker than the familiar mineral acids (e.g., hydrochloric acid, HCl, sulfuric acid, H2SO4, etc.).Recommanded Product: 4-Bromobutanoic acid

Louwsma, Jeroen; Carvalho, Alain; Lutz, Jean-Francois; Joly, Stephane; Chan-Seng, Delphine published an article in 2021. The article was titled 《Adsorption of phenylalanine-rich sequence-defined oligomers onto Kevlar fibers for fiber-reinforced polyolefin composite materials》, and you may find the article in Polymer.Recommanded Product: 4-Bromobutanoic acid The information in the text is summarized as follows:

Oligomers comprising four or sixteen phenylalanine residues with regularly intercalated aliphatic chains of different lengths prepared by solid-phase synthesis exhibit sufficient thermal stability to be used as interfacial agents and processed for the preparation of poly(propylene-co-ethylene)-based composite materials. The investigation of their adsorption on Kevlar fibers by SEM is difficult due to the surface heterogeneity of the bare Kevlar fibers. However, oligomers with four successive phenylalanine residues have been clearly observed suggesting their better adsorption on the fiber. The quantification of those oligomers adsorbed on the fibers performed gravimetrically on pellets of fibers has however revealed no significant impact of the length of the aliphatic chain.4-Bromobutanoic acid(cas: 2623-87-2Recommanded Product: 4-Bromobutanoic acid) was used in this study.

4-Bromobutanoic acid(cas: 2623-87-2) belongs to carboxylic acids. The chief chemical characteristic of the carboxylic acids is their acidity. They are generally more acidic than other organic compounds containing hydroxyl groups but are generally weaker than the familiar mineral acids (e.g., hydrochloric acid, HCl, sulfuric acid, H2SO4, etc.).Recommanded Product: 4-Bromobutanoic acid

Referemce:
Bromide – Wikipedia,
bromide – Wiktionary

Li, Changhao’s team published research in ACS Omega in 2022 | CAS: 17696-11-6

8-Bromooctanoic acid(cas: 17696-11-6) acid is used in the synthesis of 8-(N-Methyl-4,4′-bipyridinyl)- octanoic acid. 8-Mercaptooctanoic acid was prepared from 8-bromooctanoic acid.HPLC of Formula: 17696-11-6

In 2022,Li, Changhao; He, Qiaobian; Xu, Yuwen; Lou, Hongxiang; Fan, Peihong published an article in ACS Omega. The title of the article was 《Synthesis of 3-O-Acetyl-11-keto-β-boswellic Acid (AKBA)-Derived Amides and Their Mitochondria-Targeted Antitumor Activities》.HPLC of Formula: 17696-11-6 The author mentioned the following in the article:

In this study, the authors synthesized a series of amide and mitochondria-targeted derivatives with 3-O-acetyl-11-keto-β-boswellic acid (AKBA) as the parent structure and an ethylenediamine moiety as the link chain. Compound I, a mitochondrial-targeting potential derivative, showed significantly stronger antitumor activity than that of AKBA, and it could induce vacuolization of A549 cells and stimulate the production of reactive oxygen species (ROS) in a time- and concentration-dependent manner. The antioxidant N-acetylcysteine (NAC) could inhibit the ROS level but could not suppress vacuolization and cell death induced by I. Further studies demonstrated that I caused abnormal opening of mitochondrial permeability transition pore (MPTP) and a decrease of mitochondrial membrane potential; addnl., it caused cell cycle arrest in G0/G1 but did not induce apoptosis. I represents a compound with improved antiproliferative effects for cancer therapy working through new mechanisms. In the part of experimental materials, we found many familiar compounds, such as 8-Bromooctanoic acid(cas: 17696-11-6HPLC of Formula: 17696-11-6)

8-Bromooctanoic acid(cas: 17696-11-6) acid is used in the synthesis of 8-(N-Methyl-4,4′-bipyridinyl)- octanoic acid. 8-Mercaptooctanoic acid was prepared from 8-bromooctanoic acid.HPLC of Formula: 17696-11-6

Referemce:
Bromide – Wikipedia,
bromide – Wiktionary

Hu, Liqun’s team published research in ACS Catalysis in 2022 | CAS: 1530-32-1

Ethyltriphenylphosphonium bromide(cas: 1530-32-1) is a phase transfer catalyst, used to accelerate the cure of phenolic-based epoxy resins, certain fluoroelastomer resins and thermosetting powder coatings. It is also used as catalysts in the synthesis of certain organic compounds and as a pharmaceutical intermediate.Safety of Ethyltriphenylphosphonium bromide

In 2022,Hu, Liqun; Liu, Yibing; Fang, Xiong; zheng, Yuzhu; Liao, Rong-zhen; Li, Man; Xie, Youwei published an article in ACS Catalysis. The title of the article was 《An Intermolecular Hydroarylation of Highly Deactivated Styrenes Catalyzed by Re2O7/HReO4 in Hexafluoroisopropanol》.Safety of Ethyltriphenylphosphonium bromide The author mentioned the following in the article:

Here, authors describe an activation mode for unactivated alkenes on the basis of a synergy between Re2O7/HReO4 and hexafluoroisopropanol (HFIP). Highly electron-deficient styrenes have been activated to effect a challenging intermol. hydroarylation with different arenes to give a variety of diarylalkanes in high efficiency. This method is characterized by mild reaction condition, broad substrate scope, high chem. yields, and minimal waste generation. The potential synthetic application of this methodol. was exemplified by the efficient synthesis of a retinoic acid receptor (RAR) agonist. DFT calculations and deuterium-labeling experiments were conducted to elucidate the reaction mechanism, and both confirmed the critical role of HFIP, which significantly reduced the energetical barriers for several key steps of this transformation via a network of hydrogen bonding to perrhenate anion with two equivalent of HFIP. In addition to this study using Ethyltriphenylphosphonium bromide, there are many other studies that have used Ethyltriphenylphosphonium bromide(cas: 1530-32-1Safety of Ethyltriphenylphosphonium bromide) was used in this study.

Ethyltriphenylphosphonium bromide(cas: 1530-32-1) is a phase transfer catalyst, used to accelerate the cure of phenolic-based epoxy resins, certain fluoroelastomer resins and thermosetting powder coatings. It is also used as catalysts in the synthesis of certain organic compounds and as a pharmaceutical intermediate.Safety of Ethyltriphenylphosphonium bromide

Referemce:
Bromide – Wikipedia,
bromide – Wiktionary

Wu, Jianglong’s team published research in Synthesis in 2022 | CAS: 2635-13-4

Furthermore, the coupling of 5-Bromobenzo[d][1,3]dioxole(cas: 2635-13-4) with β-methallyl alcohol was catalyzed by Pd(OAc)2 in combination with P(t-Bu)3.Synthetic Route of C7H5BrO2

In 2022,Wu, Jianglong; Wang, Chenyu; Wang, Zhongjie; Li, Hongjun; Liu, Ruyan; Wang, Yan; Zhou, Pengsheng; Li, Dianjun; Yang, Jinhui published an article in Synthesis. The title of the article was 《Base/B2pin2-Mediated Iodofluoroalkylation of Alkynes and Alkenes》.Synthetic Route of C7H5BrO2 The author mentioned the following in the article:

A base/B2pin2-mediated iodofluoroalkylation of alkynes and a part of alkenes, using Et difluoroiodoacetate (ICF2CO2Et) or ICnF2n+1(n = 3, 4, 6) as difluoroacetylating or perfluoroalkylating reagent, is disclosed. The reaction proceeds under mild conditions, and iododifluoroalkylation, hydrodifluoroalkylation and several perfluoroalkylation products were generated from alkynes or alkenes. Notably, this methodol. provides a simple access to difluoroalkylated and perfluoroalkylated organic compounds starting from simple alkynes or alkenes. The experimental part of the paper was very detailed, including the reaction process of 5-Bromobenzo[d][1,3]dioxole(cas: 2635-13-4Synthetic Route of C7H5BrO2)

Furthermore, the coupling of 5-Bromobenzo[d][1,3]dioxole(cas: 2635-13-4) with β-methallyl alcohol was catalyzed by Pd(OAc)2 in combination with P(t-Bu)3.Synthetic Route of C7H5BrO2

Referemce:
Bromide – Wikipedia,
bromide – Wiktionary

Batool, Razia’s team published research in ACS Omega in 2022 | CAS: 3141-27-3

2,5-Dibromothiophene(cas: 3141-27-3) , is mainly used as pharmaceutical intermediate and synthesis intermediate. 2,5-Dibromothiophene may be used as starting reagent for the synthesis of α,α′-didecylquater-, -quinque- and -sexi-thiophenes.Recommanded Product: 3141-27-3

In 2022,Batool, Razia; Riaz, Noreen; Junaid, Hafiz Muhammad; Waseem, Muhammad Tahir; Khan, Zulfiqar Ali; Nawazish, Shamyla; Farooq, Umar; Yu, Cong; Shahzad, Sohail Anjum published an article in ACS Omega. The title of the article was 《Fluorene-Based Fluorometric and Colorimetric Conjugated Polymers for Sensitive Detection of 2,4,6-Trinitrophenol Explosive in Aqueous Medium》.Recommanded Product: 3141-27-3 The author mentioned the following in the article:

Nitroarom. explosives are a class of compounds that are responsible for various health hazards and terrorist outrages. Among these, sensitive detection of 2,4,6-trinitrophenol (TNP) explosive has always been highly desirable considering public health and national security. In this regard, three fluorene-based conjugated polymers (CP 1, CP 2, and CP 3) were synthesized through the Suzuki-Miyaura coupling reaction and were found to be highly sensitive for fluorescence detection of TNP with detection limits of 3.2, 5.7, and 6.1 pM, resp. Excellent selectivity of CPs toward TNP was attributed to their unique π-π interactions based on fluorescence studies and d. functional theory (DFT) calculations The high sensitivity of CPs to TNP was attributed to the static quenching mechanism based on the photoinduced electron transfer process and was evaluated by fluorescence, UV-visible absorption, dynamic light scattering, Job′s plots, the Benesi-Hildebrand plots, and DFT calculations CPs were also used for colorimetric and real-water sample anal. for the detection of TNP explosive. Meanwhile, sensor-coated test strips were fabricated for on-site detection of TNP, which makes them convenient solid-supported sensors. In the part of experimental materials, we found many familiar compounds, such as 2,5-Dibromothiophene(cas: 3141-27-3Recommanded Product: 3141-27-3)

2,5-Dibromothiophene(cas: 3141-27-3) , is mainly used as pharmaceutical intermediate and synthesis intermediate. 2,5-Dibromothiophene may be used as starting reagent for the synthesis of α,α′-didecylquater-, -quinque- and -sexi-thiophenes.Recommanded Product: 3141-27-3

Referemce:
Bromide – Wikipedia,
bromide – Wiktionary

Asay, Spencer’s team published research in Molecules in 2020 | CAS: 2969-81-5

Ethyl 4-bromobutyrate(cas: 2969-81-5) belongs to bromides. One prominent application of synthetic organobromine compounds is the use of polybrominated diphenyl ethers as fire-retardants, and in fact fire-retardant manufacture is currently the major industrial use of the element bromine.COA of Formula: C6H11BrO2

COA of Formula: C6H11BrO2In 2020 ,《gamma-tocotrienol and a-tocopherol ether acetate enhance docetaxel activity in drug-resistant prostate cancer cells》 appeared in Molecules. The author of the article were Asay, Spencer; Graham, Andrew; Hollingsworth, Sydney; Barnes, Bradley; Oblad, Richard V.; Michaelis, David J.; Kenealey, Jason D.. The article conveys some information:

Prostate cancer is the second most commonly diagnosed cancer in men, and metastatic prostate cancer is currently incurable. Prostate cancer frequently becomes resistant to standard of care treatments, and the administration of chemotherapeutic drugs is often accompanied by toxic side effects. Combination therapy is one tool that can be used to combat therapeutic resistance and drug toxicity. Vitamin E (VE) compounds and analogs have been proposed as potential non-toxic chemotherapeutics. Here we modeled combination therapy using mixture design response surface methodol. (MDRSM), a statistical technique designed to optimize mixture compositions, to determine whether combinations of three chemotherapeutic agents: gamma-tocotrienol (gamma-T3), a-tocopherol ether acetate (a-TEA), and docetaxel (DOC), would prove more effective than docetaxel alone in the treatment of human prostate cancer cells. Response surfaces were generated for cell viability, and the optimal treatment combination for reducing cell viability was calculated We found that a combination of 20 uM gamma-T3, 30 uM a-TEA, and 25 nm DOC was most effective in the treatment of PC-3 cells. We also found that the combination of gamma-T3 and a-TEA with DOC decreased the amount of DOC required to reduce cell viability in PC-3 cells and ameliorated therapeutic resistance in DOC-resistant PC-3 cells. After reading the article, we found that the author used Ethyl 4-bromobutyrate(cas: 2969-81-5COA of Formula: C6H11BrO2)

Ethyl 4-bromobutyrate(cas: 2969-81-5) belongs to bromides. One prominent application of synthetic organobromine compounds is the use of polybrominated diphenyl ethers as fire-retardants, and in fact fire-retardant manufacture is currently the major industrial use of the element bromine.COA of Formula: C6H11BrO2

Referemce:
Bromide – Wikipedia,
bromide – Wiktionary

Jumina, Jumina’s team published research in Synthesis in 2019 | CAS: 539-74-2

Ethyl 3-bromopropanoate(cas: 539-74-2) belongs to organobromine compounds. A variety of minor organobromine compounds are found in nature, but none are biosynthesized or required by mammals. The most pervasive is the naturally produced bromomethane.Recommanded Product: 539-74-2

Recommanded Product: 539-74-2In 2019 ,《Synthesis of a Variety of Activated Pyrrolo[3,2,1- ij ]quinolines》 appeared in Synthesis. The author of the article were Jumina, Jumina; Wenholz, Daniel S.; Kumar, Naresh; Black, David StC.. The article conveys some information:

A range of 7,9-dimethoxypyrrolo[3,2.1- ij]quinolines have been prepared by the cyclization of 7-formyl-1-diethylcarbethoxyindoles. The functionality at C5 has been varied by the conversion of the carbethoxy group into carboxy, azidocarbonyl and isocyanate groups. The hydroboration of a previously reported pyrroloquinolone gave a related 5-hydroxypyrrolo[3,2,1- ij]quinolone, and the hydroxyl group was sequentially converted into tosylate, azido and amino groups. In the experiment, the researchers used Ethyl 3-bromopropanoate(cas: 539-74-2Recommanded Product: 539-74-2)

Ethyl 3-bromopropanoate(cas: 539-74-2) belongs to organobromine compounds. A variety of minor organobromine compounds are found in nature, but none are biosynthesized or required by mammals. The most pervasive is the naturally produced bromomethane.Recommanded Product: 539-74-2

Referemce:
Bromide – Wikipedia,
bromide – Wiktionary