Category: 103-64-0

Reference of 103-64-0, A common heterocyclic compound, 103-64-0, name is (2-Bromovinyl)benzene, molecular formula is C8H7Br, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Vinyl halide (0.3mmol, if it is solid), CuI (0.0001 mol%, 20 muL in DMSO), PPh3 (2mol%), K2CO3 (0.6mmol), and tetra n-butylammonium acetate were added to a screw-capped test tube with 3 mL of deoxygenated water. The tube was evacuated and backfilled with argon (3 cycles). Under the argon atmosphere, the alkyne (0.4 mmol) and vinyl halide (if it is liquid) were added by syringe at room temperature. The mixture was heated to 100C and stirred for 24 h. After cooling to room temperature, the mixture was extracted three times with ethyl acetate. The organic layers were combined, dried over Na2SO4, and concentrated to yield the crude product, which was further purified by silica gel chromatography, using petroleum ether and ethyl acetate as eluent to provide the desired product.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Sun, Peng; Yan, Hong; Lu, Linhua; Liu, Defu; Rong, Guangwei; Mao, Jincheng; Tetrahedron; vol. 69; 34; (2013); p. 6969 – 6974;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 103-64-0, A common heterocyclic compound, 103-64-0, name is (2-Bromovinyl)benzene, molecular formula is C8H7Br, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of an appropriate amount of an organic solvent (a mixture of N, N-dimethylformamide (DMF) and polyethylene glycol 200 (PEG-200) in a volume ratio of 4: 1)100 mmol of the compound of the above formula (I), 60 mmol of the compound of the above formula (II), 8 mmol of catalyst bis (triphenylphosphine) cyclopentadienyl ruthenium chloride, 120 mmol of an oxidizing agent bis (trifluoroacetic acid) iodobenzene (PhI (TFA) 2),15 mmol of organic ligands L1, 80 mmol of base, 5,7-triazabicyclo [4.4.0] dec-5-ene (TBD) and 8 mmol of activator of niobium pentachloride were added and then stirred to a temperature of 80 C, The reaction was stirred at this temperature for 11 hours;After completion of the reaction, the reaction system is naturally cooled to room temperature and the pH is adjusted to neutral, filtered and the filtrate is saturated Washed with brine and extracted with ethyl acetate 2-3 times. The combined organic phases were dried over anhydrous sodium sulfate and concentrated under reduced pressure. The residue was passed through Silica gel column chromatography eluting with a 1: 2 by volume mixture of chloroform and petroleum ether to give a compound of the above formula (III) The yield was 89.7%.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Huang Cheng; Bu Gonggaofamingren; (11 pag.)CN106278838; (2017); A;,
Bromide – Wikipedia,
bromide – Wiktionary

Reference of 103-64-0, The chemical industry reduces the impact on the environment during synthesis 103-64-0, name is (2-Bromovinyl)benzene, I believe this compound will play a more active role in future production and life.

An oven-dried vial equipped with a stir bar was dessicated. To a solution of CoBr2 (22 mg, 0.10 mmol, 10 mol%), bis-1,2-diphenylphosphinohexane (43.2 mg, 0.10 mmol, 10 mol%), and manganese powder (165 mg, 3 mmol, 3 equiv) in acetonitrile (5 mL) was added the alkenyl bromide (1.5 mmol, 1.5 equiv) at 50 oC. A solution of the chlorodehydropiperidine (1 mmol, 1 equiv) in acetonitrile (5 mL) was added slowly. After completion (as judged by TLC and GC-MS), the reaction mixture was treated with a mild acid such as 10% H3PO4 (aq) and extracted with CH2Cl2. The combined organic layers were dried over MgSO4, filtered, and concentrated under reduced pressure to afford the desired coupling product as an oil. Purification was carried out by flash chromatography on silica (pretreated with 1% Et3N).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, (2-Bromovinyl)benzene, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Farah, Abdikani Omar; Archibald, Ryan; Rodriguez, Morgan J.; Moreno, Antonio; Dondji, Blaise; Beng, Timothy K.; Tetrahedron Letters; vol. 59; 38; (2018); p. 3495 – 3498;,
Bromide – Wikipedia,
bromide – Wiktionary

Related Products of 103-64-0, A common heterocyclic compound, 103-64-0, name is (2-Bromovinyl)benzene, molecular formula is C8H7Br, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of N, N-dimethylformamide (DMF) in a volume ratio of 4: 1 with polyethylene glycol 200(PEG-200)) was added 100 mmol of the compound of the above formula (I), 60 mmol of the compound of the above formula (II), 8 mmol of catalyst bis (triphenylphosphine) cyclopentadienyl ruthenium chloride,(TFA) 2), 15 mmol of organic ligand L1 and 80 mmol of base, 5,7-triazabicyclo [4.4.0] dec-5-ene (TBD), Then the mixture was warmed to 80 C with stirring, and the reaction was stirred at that temperature for 11 hours;After completion of the reaction, the reaction system is naturally cooled to room temperature and the pH is adjusted to neutral, filtered and the filtrate is saturatedWashed with brine, and extracted with ethyl acetate 2-3 times, combined with organic phase,Dried over anhydrous sodium sulfate and concentrated under reduced pressure. The residue was subjected to silica gel column chromatography eluting with a 1: 2 by volume mixture of chloroform and petroleum ether to give the compound of the above formula (III) in a yield of 76.6%.

The synthetic route of 103-64-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Huang, Cheng; No proclaimed inventor; (12 pag.)CN106278839; (2017); A;,
Bromide – Wikipedia,
bromide – Wiktionary

Reference of 103-64-0, A common heterocyclic compound, 103-64-0, name is (2-Bromovinyl)benzene, molecular formula is C8H7Br, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

At room temperature,To the appropriate amount of the organic solvent DMF was added 100 mmol of the compound of the above formula (I)250 mmol of the compound of formula (II)4 mmol of catalyst (1 mmol of Pd (TFA) 2 with 3 mmol of Cu (acac) 2)35 mmol of 1-ethyl ethyl ether-3-methylimidazolebis (trifluoromethanesulfonyl) imide salt and 250 mmol of triisopropanolamine,Then heated to 70 C,And the reaction was stirred at that temperature for 8 hours; After the reaction,The resulting mixture was filtered while hot,To obtain a filtrate;To the filtrate was added a 10% hydrochloric acid solution with a mass percentage of 10%Adjust the pH to neutral;Then ethyl acetate,Oscillation extraction 2-3 times,Combined organic phase,Dried over anhydrous magnesium sulfate,Then concentrated under reduced pressure,The resulting residue was subjected to 200-300 mesh silica gel column chromatography,The petroleum ether-n-butanol mixture was used as the eluent,Wherein the volume ratio of petroleum ether to n-butanol is 9: 1,Thereby obtaining a compound of the above formula (III)The yield was 97.3%.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Qingdao University; Xia Yunqiu; Zhou Yingbin; Wang Yanxin; Zhong Weizhen; Guo Shenbo; (9 pag.)CN104803912; (2017); B;,
Bromide – Wikipedia,
bromide – Wiktionary