Category: bromides-buliding-blocks

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 22034-13-5 as follows. Application In Synthesis of 4-Bromobenzo[c][1,2,5]thiadiazole

General procedure: To a solution of 4-bromobenzo[c] [1,2,5]thiadiazole (107 mg,0.50 mmol) and N,N-dimethyl-4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)aniline (124 mg, 0.50 mmol) in toluene-ethanol(30 mL/10 mL), Pd(PPh3)4 (57 mg, 0.05 mmol) and anhydrous K2CO3 (207 mg, 1.5 mmol) were added under an argon flow at room temperature. The mixturewas then heated to 80 °C for12 h. The mixture was quenched with water after cooling back to room temperature and extracted with dichloromethane. The combined extract was dried with anhydrous Na2SO4 and concentrated by rotary evaporation. The residue was purified by column chromatography on silica gel with CH2Cl2/petroleum (1:1) to afford NBT as an orange solid.

According to the analysis of related databases, 22034-13-5, the application of this compound in the production field has become more and more popular.

Reference:
Article; Jiang, Di; Chen, Songhua; Xue, Zheng; Li, Yongjun; Liu, Huibiao; Yang, Wensheng; Li, Yuliang; Dyes and Pigments; vol. 125; (2016); p. 100 – 105;,
Bromide – Wikipedia,
bromide – Wiktionary

43204-63-3, name is Bis(2-Bromoethyl)amine hydrobromide, belongs to bromides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Recommanded Product: 43204-63-3

PREPARATION EXAMPLE 4 (2S)-3-{4-[2-(5-methyl-2-phenyl-1, 3-oxazol-4-yl)-ethoxy]-phenyl}-2-piperazin-1-yl-propionic acid methyl ester (Intermediate 4) Diethanolamine (100 g) and 40% HBr aqueous solution (1000 mL) were mixed and vigorously refluxed for 10 h, while water was removed continuously under reduced pressure during the reaction. The resulting solution was concentrated to give 297 g of a brown liquid. The above brown liquid (47.4 g), Intermediate 3A (4.5 g, 11.8 mmol ) and 150 mL of anhydrous ethanol were mixed with refluxing overnight. Thereafter, the mixture was cooled to room temperature, to which Na2CO3 (1.3 g, 11.8 mmol) was added before further refluxing for 10 h. After cooling to room temperature, the mixture was filtered and evaporated to remove ethanol. The residue was dissolved in CHCl3, and washed with water and saturated brine in turn, and then dried over anhydrous Na2SO4. After concentration and purification with silica gel column chromatography (using CHCl3/CH3OH (60/1) as an eluent), Intermediate 4A (1.0 g, 24% yield) as a brown solid was obtained. MS[M]+=449.4 m/e; 1H-NMR (400 MHz, DMSO-d6), delta 7.987.96 (m, 2H), 7.467.38 (m, 3H), 7.06 (d, 2H), 6.81 (d, 2H), 2.702.61 (m, 2H), 2.602.51 (m, 2H), 2.36 (s, 3H).

The synthetic route of 43204-63-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BEIJING MOLECULE SCIENCE AND TECHNOLOGY CO., LTD.; US2007/259883; (2007); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

These common heterocyclic compound, 2924-09-6, name is 5-Bromo-2-fluoroaniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 5-Bromo-2-fluoroaniline

Stir the mixture of 5-bromo-2-fluoroaniline (800 mg, 4.26 mmol), cyclopropylboronic acid (434 mg, 5.05 mmol), tetrakis(triphenylphosphine)palladium(0) (242 mg, 0.21 mmol), cesium carbonate (2.7 g, 8.28 mmol) in dioxane (5 mL) and water (0.3 mL) under N2 atmosphere at 100C for 17 hrs. TLC (EtOAc:PE=l :3) shows the reaction is complete. Filter off the solid, concentrate the filtrate. Purify by flash chromatography (silica gel, EtOAc_PE=3:7) to afford the title compound (350 mg, 55%). MS: (M+l): 152.1.

The synthetic route of 5-Bromo-2-fluoroaniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; CROWN BIOSCIENCE INC. (TAICANG); ZHANG, Deyi; ZHANG, Ruihao; ZHONG, Boyu; SHIH, Chuan; WO2014/418; (2014); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 58534-95-5, name is 3-Bromo-2-fluoroaniline, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C6H5BrFN

The product from step 1 (200 mg, 0.7268 mmol), 3-bromo-2-fluoro-phenylamine (165 mg, 0.7268 mmol, 1 eq.), Na2CO3 (616 mg, 5.814 mmol. 8 eq.) and Pd(PPh3)4 (84 mg, 0.1 eq.) are partially dissolved in a mixture of DMF (10 mL) and H2O (2 mL). N2 gas is bubbled through this reaction mixture for 5 minutes. The resulting mixture is heated to 150 C. in a sealed tube under microwave irradiation for 10 min. The reaction is diluted with EtOAc and sequentially washed with H2O, 1 N NaOH (aq), and saturated aqueous NaCl. The organic solution is dried over Na2SO4 and concentrated. The resulting residue is purified on silica gel (2:1 hexanes/EtOAc) to afford the aniline product as a yellow oil. ESMS m/z 259.1 (M+H+).

According to the analysis of related databases, 58534-95-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Irm LLC; US2009/75996; (2009); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 176317-02-5, name is 1-Bromo-2,3,4-trifluorobenzene belongs to bromides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 1-Bromo-2,3,4-trifluorobenzene

EXAMPLE 232 (+)-(4aR)-(10bR)-4-methyl-8-(2,3,4-trifluorophenyl)-10b-methyl-1,2,3,4,4a,5,6,10b-octahydrobenzo[f]quinolin-3-one STR250 A 15 mL round bottom flask was charged with (+)-(4aR)-(10bR)-4-methyl-10b-methyl-1,2,3,4,4a,5,6,10b-octahydrobenzo[f]quinolin-3-one-8-boronic acid (178 mg, 0.65 mmol), tetrakis(triphenylphosphine)palladium(0) (23 mg, 0.02 mmol), 1-bromo-2,3,4-trifluorobenzene (137 mg, 0.65 mmol), 0.65 mL of 2M sodium carbonate and 2 mL of THF, fitted with a reflux condenser, and the stirred mixture was heated at 80, under nitrogen, for 24 h. The mixture was cooled, diluted with ethyl acetate (75 mL) and washed with brine (2*25 mL). The combined organic extracts were dried over sodium sulfate, concentrated, and purified by silica gel chromatography (70% ethyl acetate/hexanes eluent) to give 100 mg (43%) of the title compound as a white solid. mp 100-102. FDMS: m/e=359. alpha[D]589 =+7837 (c=0.33, chloroform).

The synthetic route of 176317-02-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Eli Lilly and Company; US5578724; (1996); A;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 348-57-2, name is 1-Bromo-2,4-difluorobenzene, A new synthetic method of this compound is introduced below., Application In Synthesis of 1-Bromo-2,4-difluorobenzene

39 mmol (7.52 g) of 1-bromo-2,4-difluorobenzene were loaded into a 100-ml flask, and the temperature of the 1-bromo-2,4-difluorobenzene was heated to 60C. Next, 0.15 g of iron was added, and then 39 mmol (6.23 g) of bromine were dropped over 3 hours while the temperature of the mixture was kept at 60C. After the completion of the dropping, the resultant was further subjected to a reaction at 60C for 2 hours. After the temperature of the resultant reaction liquid had been cooled to room temperature, the reaction liquid was charged into a cold aqueous solution of sodium hydroxide, and the reaction product was extracted with hexane. An organic layer was washed with pure water and a saturated sodium chloride solution, and was dehydrated with anhydrous sodium sulfate. After that, the solvent was removed. The resultant residue was purified by means of silica gel chromatography (developing solvent: hexane), whereby 8.81 g of a compound A as colorless oil were obtained (84% yield).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Chuo University; Idemitsu Kosan Co., Ltd.; EP1961743; (2008); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

These common heterocyclic compound, 402-43-7, name is 1-Bromo-4-(trifluoromethyl)benzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 402-43-7

General procedure: A mixture of CuF2 (102 mg, 1.00 mmol), the aryl halide (500 mumol), 2-aminoethanol (74.9 muL, 1.25 mmol), and NaN3 (65.0 mg, 1.00 mmol) in DMA (1 mL) was stirred under an Ar atmosphere (balloon) at 95 C using a Chemistation personal organic synthesizer (EYELA, Tokyo). After complete consumption of the aryl halide was confirmed by TLC analyses or after 24 h (if the reaction was incomplete within 24 h), the mixture was diluted with EtOAc (10 mL) and then filtered through a Celite pad. The pad was successively washed with EtOAc (20 mL), H2O (25 mL), and concd aq ammonia solution (5 mL). After the two layers were separated, the aqueous layer was extracted with EtOAc (2×10 mL). The combined organic layers were washed with brine (20 mL), dried over MgSO4, filtered, and concentrated under reduced pressure. The residue was purified by silica-gel column chromatography with n-hexane/EtOAc or n-pentane/Et2O as the eluent.

The synthetic route of 1-Bromo-4-(trifluoromethyl)benzene has been constantly updated, and we look forward to future research findings.

Reference:
Article; Maejima, Toshihide; Shimoda, Yutaka; Nozaki, Kei; Mori, Shigeki; Sawama, Yoshinari; Monguchi, Yasunari; Sajiki, Hironao; Tetrahedron; vol. 68; 6; (2012); p. 1712 – 1722;,
Bromide – Wikipedia,
bromide – Wiktionary

Reference of 103273-01-4, A common heterocyclic compound, 103273-01-4, name is 2-Bromo-4-(tert-butyl)aniline, molecular formula is C10H14BrN, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a mixture of 2-bromo-4- tert-butylaniline (Compound 1-1, 16.8 g, 74 mmol) and CuCN (13.29 g, 148 mmol) in a 250 mL round-bottom flask was added NMP (N-methylpyrrolidone, 100 mL) . The mixture was heated to reflux under nitrogen until TLC analysis showed full conversion of the starting material. The mixture was cooled to room temperature and the solvent was removed under vacuum. To the residue was added aq. NH40H at 0 C. Ethyl acetate was used for extraction (three times) . The combined organic phase was dried over anhydrous MgSC>4, filtered, and evaporated under vacuum. The residue was purified by flash chromatography (ethyl acetate : hexanes = 1:10) to provide the aminobenzonitrile Compound 1-2 as a yellow solid (10.8 g, 84% yield) . 1H NMR (400 MHz, CDC13) delta 7.39- 7.33 (m, 2H) , 6.70 (d, J = 8.4 Hz, 1H) , 4.32 (br, 2H, NH2), 1.25 (s, 9H) ; 13C NMR (100 MHz, CDC13) delta 147.48, 141.15, 131.77, 128.56, 118.22, 115.32, 95.63, 34.02, 31.21. HRMS (ESI-TOF) m/z Calcd for C11H15N2+ [M+H] + 175.1230, found 175.1235.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; THE SCRIPPS RESEARCH INSTITUTE; YU, Jin-Quan; (107 pag.)WO2016/123361; (2016); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Electric Literature of 51436-99-8, These common heterocyclic compound, 51436-99-8, name is 4-Bromo-2-fluorotoluene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 29 Preparation of 2-fluoro-4-cyanotoluene (38) Copper(I) cyanide (Aldrich, 3.6 g, 40 mmol) was added to a solution of 4-bromo-2-fluorotoluene (Aldrich, 5 g, 27 mmol) in DMF (60 mL). The reaction mixture was heated at 150 C. for 11 hours. After cooling to room temperature, the mixture was partitioned between water and EtOAc (500 mL each). The organic layer was dried (MgSO4), and solvent was removed under vacuum to give the title compound (2.08, 58%). 1H-NMR (CDCl3) delta2.36 (s, 3H), 7.30 (m, 3H), 7.35 (d, 1H, J=8.1 Hz).

The synthetic route of 51436-99-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Corvas International, Inc.; US6541467; (2003); B1;,
Bromide – Wikipedia,
bromide – Wiktionary

Application of 626-88-0, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 626-88-0 as follows.

General procedure: To a solution of compound 3 (0.46 g, 2 mmol), in dry DMF (5 mL), and anhydrous potassium carbonate (0.5 g, 3.4 mmol) and,an appropriate bromoalkyl halide (2 equivalent) was added. Themixturewas heated for 12 h at 80 C, and then the reaction mixturewas poured over crushed ice, filtered and washed with water toyield the desired product. The isolated crude materials were furtherpurified by silica gel chromatography, using EtOAc-hexane (3:7) toprovide the desired products. The physical characteristics andspectral data of separated products are listed below.

According to the analysis of related databases, 626-88-0, the application of this compound in the production field has become more and more popular.

Reference:
Article; Yahia, Eman; Mohammad, Haroon; Abdelghany, Tamer M.; Fayed, Eman; Seleem, Mohamed N.; Mayhoub, Abdelrahman S.; European Journal of Medicinal Chemistry; vol. 126; (2017); p. 604 – 613;,
Bromide – Wikipedia,
bromide – Wiktionary