Category: bromides-buliding-blocks

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 452-63-1, name is 1-Bromo-4-fluoro-2-methylbenzene, A new synthetic method of this compound is introduced below., Application In Synthesis of 1-Bromo-4-fluoro-2-methylbenzene

Step 1: A mixture of 2-bromo-5-fluorotoluene (2.0 g, 11 mmol), acrylamide (1.5 g, 21 mmol), P(o-tolyl)3 (320 mg, 1.1 mmol), and Et3N (2.9 mL, 21 mmol), in toluene (25 mL) was deoxygenated by bubbling a stream of Ar through the solution for 15 minutes. Palladium(II) acetate (120 mg, 0.53 mmol) was added to the reaction mixture, and a stream of Ar was again passed through the mixture for 15 minutes. The reaction was heated to 140 C. for 2.25 hours, then cooled to ambient temperature, diluted with EtOAc, and filtered through Celite. The filtrate was washed with H2O, 1N HCl, H2O, dried (Na2SO4), filtered, and concentrated under reduced pressure to give amide 78 (1.7 g, 86%) which was used without further purification: 1H NMR (500 MHz, DMSO-d6): ?7.60-7.52 (m, 3H), 7.15-7.04 (m, 3H), 6.46 (d, J=16 Hz, 1H), 2.37 (s, 3H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Nikam, Sham Shridhar; Scott, Ian Leslie; Sherer, Brian Alan; Wise, Lawrence David; US2003/236252; (2003); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Electric Literature of 10485-09-3, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 10485-09-3, name is 2-Bromoindene, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: An oven-dried 10 mL reaction vial equipped with a stir bar was charged with azole heterocycles (1, 0.2 mmol, 1.0 equiv) and alkenyl bromides (2, 0.30 mmol, 1.5 equiv) in a glove box under a nitrogen atmosphere. A solution of catalytic Pd2(dba)3 (9.15 mg, 0.01 mmol, 5 mol%) and NiXantphos (11.03 mg, 0.02 mmol, 10 mol%) was stirred in 1 mL of dry tetrahydrofuran (THF) for 2 h at room temperature. Then, t-BuONa (57.7 mg, 0.6 mmol, 3.0 equiv) and reagent mixed with catalyst were added to the reaction mixture. And thenthe vial was capped. According to the temperature requirements for different products, some vials were stirred in the glove box for 24 h, but others were removed from the glove box, and stirred for 24 h at 70 or 150 . The reaction mixture was quenched with three drops of H2O, diluted with 3 mL of ethyl acetate, and filtered over a pad of silica. The pad was rinsed with ethyl acetate (15-25 mL), and the combined solutions were concentrated in vacuo. The crude material was loaded onto a deactivated silica gel column and purified by flash chromatography to afford the desired product.

The chemical industry reduces the impact on the environment during synthesis 2-Bromoindene. I believe this compound will play a more active role in future production and life.

Reference:
Article; Yao, Yun-Xin; Fang, Dong-Mei; Gao, Feng; Liang, Xiao-Xia; Tetrahedron Letters; vol. 60; 1; (2019); p. 68 – 71;,
Bromide – Wikipedia,
bromide – Wiktionary

Some common heterocyclic compound, 1003-99-2, name is 2-Bromo-5-fluoroaniline, molecular formula is C6H5BrFN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of 2-Bromo-5-fluoroaniline

2-Bromo-5- fluorobenzenamine (15 g, 78.94 mmol) was weighed into a 100 mL flask and dissolved in 100 mL of 6N HCl. The reaction mixture was heated to reflux, followed by dropwise addition of (E)-but-2-enal (6.87 ml, 83 mmol) mixed with 1.0 mL deionized water over 25 minutes. Following complete addition, the reaction was heated at 100 °C for an additional 35 minutes. The reaction was cooled to ambient temperature, followed by addition of 50 mL of Et2O. The reaction was stirred for 5 minutes followed by removal of Et2O by separatory funnel. ZnCl2 (3.587 g, 26 mmol) was added to the aqueous layer in two portions and the reaction mixture was cooled to 0 0C over 30 minutes. The aqueous layer was then taken to pH 8.0 using concentrated NH4OH. The aqueous layer was then extracted with Et2O and then EtOAc. The combined organic phases were dried over Na2SO4, filtered and concentrated in vacuo, affording the desired product 8-bromo-5-fluoro-2-methylquinoline (18.1 g, 95 percent yield) as a solid.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1003-99-2, its application will become more common.

Reference:
Patent; ARRAY BIOPHARMA INC.; WO2008/121687; (2008); A2;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding some certain compound to certain chemical reactions, such as: 1575-37-7, name is 4-Bromobenzene-1,2-diamine, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1575-37-7. 1575-37-7

A 250 mL four-necked flask equipped with a mechanical stirrer, thermometer, reflux condenser, nitrogen inlet and bubble counterEach o-diaminobenzene (0.031 mol) (Formula 1a) was added dropwise to glacial acetic acid (50 mL) under a nitrogen atmosphere.The resulting slurry was cooled to 4 [deg.] C in an ice-bath. Sodium nitrite in water (6 mL) (2.24 g,0.032 mol) in THF Was added dropwise over 40 minutes while maintaining the temperature of the reaction mixture below & lt; RTI ID = 0.0 & gt; 10 C. & lt; / RTI & gt; GeneratedThe slurry was allowed to warm to room temperature and analyzed using a KI / amylose test paper until analysis for free HNO2 was negative and starting material was not visible in thin layer chromatography (16 h)Under stirring. The resulting slurry was filtered; the solid residue washed with water (100 mL) and the resulting solid was further purified by recrystallization from ethanol (20 mL). The product was dried for 24 h at 50 C. and 5 mbar and obtained as off-white solid. Yield: 67%.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4-Bromobenzene-1,2-diamine.

Reference:
Patent; BASF SE; Reihard, Robert; Kalor, Martin; Router, Michael; Li, Yuchuo; Cliff, Andreas; (31 pag.)KR2016/30566; (2016); A;,
Bromide – Wikipedia,
bromide – Wiktionary

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 43204-63-3, name is Bis(2-Bromoethyl)amine hydrobromide, This compound has unique chemical properties. The synthetic route is as follows., name: Bis(2-Bromoethyl)amine hydrobromide

PREPARATION 5 A mixture of 6-amino-8-methyl-3,4-dihydro-2(1H)-quinolinone (19.4 g), bis(2-bromoethyl)amine hydrobromide (41 g) and methanol (140 ml) was stirred for 13 hours at 64 C. After cooling, sodium carbonate (5.83 g) was added thereto and the mixture was stirred for 9 hours at 70 C. After cooling, the resulting precipitate was collected by filtration and the residue was washed with methanol to give 3,4-dihydro-8-methyl-6-(1-piperazinyl)-2(1H)-quinolinone hydrobromide (21.6 g). mp: >250 C. IR (Nujol): 1680, 1595 cm-1

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 43204-63-3.

Reference:
Patent; Fujisawa Pharmaceutical Co., Ltd.; US4988698; (1991); A;,
Bromide – Wikipedia,
bromide – Wiktionary

Electric Literature of 337915-79-4, A common heterocyclic compound, 337915-79-4, name is 5-Bromo-N1-methylbenzene-1,2-diamine, molecular formula is C7H9BrN2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

[000849j To a stirred solution of compound 3 (1 g, 1 eq) in POC13 (2 mL), cyclopropane carboxylic acid (0.5 mL) were added. The resulting reaction mixture was heated at 120 C for 3h. The progress of the reaction was monitored by TLC. After completion of the reaction, the reaction mixture was quenched with saturated sodium bicarbonate solution and extracted with ethyl acetate (3 X 20 mL). Combined organic extracts were washed with brine, dried over anhydrous sodium sulfate and evaporated under reduced pressure. The crude product was purified by column chromatography on silica gel 100-200 mesh using 20% EtOAc-hexane to afford the title compound 4. LCMS (mlz): 250.95 (M + 1).

The synthetic route of 337915-79-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BIOMARIN PHARMACEUTICAL INC.; BHAGWAT, Shripad; WANG, Bing; LUEDTKE, Gregory R.; SPYVEE, Mark; (490 pag.)WO2016/57834; (2016); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

1435-51-4, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 1435-51-4 as follows.

step 1-A solution of 57a, sodium methoxide (1 equivalent) and DMF were stirred overnight under an N2 atmosphere at RT. The volatile solvents were removed in vacuo and the residue partitioned between Et2O and water. The organic phase was washed with 5% NaOH, water and brine, dried (MgSO4), filtered and evaporated to afford 57b.

According to the analysis of related databases, 1,3-Dibromo-5-fluorobenzene, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Roche Palo Alto LLC; US2006/25462; (2006); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 5433-01-2, name is 1-Bromo-3-isopropylbenzene belongs to bromides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 5433-01-2

To a solution of Compound 59A (3.96 g, 20 mmol) in dry THF (20 mL) at – 78 C was dropped a solution of n-BuLi in THF (2.5 M, 8 mL, 18 mmol). After stirred at – 78 C for 1 hour, to the mixture was dropped N-methoxy-N-methylacetamide (1.87 g, 18 mmol). The mixture was stirred at -78 C for 0.5 hour, quenched with water (10 mL), and extracted with ethyl acetate (20 mL x 3). The combined organic layers was washed with brine (40 mL), dried over anhydrous sodium sulfate, filtered, and concentrated under reduced pressure. The residue was purified with flash column chromatography on silica gel (ethyl acetate in petroleum ether, from 0% to 8% v/v) to yield Compound 59B: LC-MS (ESI) m/z: 163 [M+H]+;1H-NMR (CDCl3, 400 MHz): delta (ppm) 1.27 (d, J =7.2.4 Hz, 6H), 2.60 (s, 3H), 2.93-3.00 (m, 1H), 7.38 (t, J = 7.6 Hz, 1H), 7.44 (t, J = 7.2Hz, 1H), 7.76 (d, J = 7.2 Hz, 1H), 7.83 (s, 1H).

The synthetic route of 5433-01-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BIOMARIN PHARMACEUTICAL INC.; WANG, Bing; (552 pag.)WO2017/214505; (2017); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 88223-35-2, These common heterocyclic compound, 88223-35-2, name is 2-Bromo-9,9-dibutyl-9H-fluorene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

3 parts of 4-tert-butylaniline,8.9 parts of 2-bromo-9,9-dibutylfluorene,0.23 parts of palladium (II) acetate,1.9 parts of 2,2-bis (diphenylphosphino) -1,1′-binaphthyl and 2.9 parts of sodium tert-butoxide were added to 35 parts of toluene and reacted under heating reflux condition for 15 hours.The reaction mixture was added drop-Extraction with chloroform – water,After concentrating the chloroform phase,Separation by column chromatography (ethyl acetate – hexane)Purified,4 parts of a compound represented by the following formula (300) as a yellow solid.

The synthetic route of 88223-35-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Nippon Kayaku Corporation; Satake, Masamitsu; (71 pag.)JP2016/196424; (2016); A;,
Bromide – Wikipedia,
bromide – Wiktionary

Reference of 90562-10-0, A common heterocyclic compound, 90562-10-0, name is 1-Bromo-4-(3-bromopropyl)benzene, molecular formula is C9H10Br2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The starting material was prepared using an analogous procedure to that described in Example 35 for the preparation of 3-(4-allyloxyphenyl)-1-methoxypropane but starting from 3-(4-bromophenyl)propyl bromide. There was thus obtained 3-(4-bromophenyl)-1-(methoxy)propane; NMR (CDCl3): 1.8-2.0(2H, m), 2.6-2.7(2H, t), 3.3-3.4(5H, m), 7.0-7.1(2H, d) and 7.3-7.4(2H, d).

The synthetic route of 90562-10-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Zeneca Limited; US5919793; (1999); A;,
Bromide – Wikipedia,
bromide – Wiktionary