Tag: M.W=100-200

39478-78-9,Some common heterocyclic compound, 39478-78-9, name is 5-Bromo-2-methylaniline, molecular formula is C7H8BrN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution 5-bromo-2-methyl aniline (6.38 g, 36.74 mmol) in EtOH (30 ml) was added acetonyl acetone (5.0 ml, 42.62 mmol) and one drop of conc. aqueous HCl. The mixture was heated at reflux for 18 h and then cooled. Solvent was evaporated to dryness under reduced pressure and the residue was partitioned between water and EtOAc. The organic layer was separated and washed with water and brine dried over MgSO4, filtered and concentrated to dryness under reduced pressure. Purification of the residue by flash chromatography (hex:EtOAc/8:2) gave 5.8 g of 1-(5-bromo-2-methyl-phenyl)-2,5-dimethyl-1H-pyrrole (60%) as a clear oil.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Bromo-2-methylaniline, its application will become more common.

Reference:
Patent; Brotherton-Pleiss, Christine E.; Caroon, Joan Marie; Lopez-Tapia, Francisco Javier; Walker, Keith Adrian Murray; US2011/28502; (2011); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 1003-99-2, name is 2-Bromo-5-fluoroaniline, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1003-99-2, HPLC of Formula: C6H5BrFN

General procedure: Method I. Compounds 1a-1e and 3b were synthesized using a modified procedure.1 Substituted aniline (1.0 equiv.) was added to a round-bottom flask. The flask was fitted with a rubber septum and purged with nitrogen gas, and acetic anhydride (1M in CH2Cl2, 1.1 equiv.) was added at room temperature. The reaction was refluxed overnight and monitored by TLC. Upon completion the reaction mixture was quenched with H2O. The resulting mixture was extracted with CH2Cl2. The combined organic layers were washed with brine, dried over anh. Na2SO4, filtered, then concentrated in vacuo to give the product.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-Bromo-5-fluoroaniline, and friends who are interested can also refer to it.

Reference:
Article; Lasing, Thitiya; Phumee, Atchara; Siriyasatien, Padet; Chitchak, Kantima; Vanalabhpatana, Parichatr; Mak, Kit-Kay; Hee Ng, Chew; Vilaivan, Tirayut; Khotavivattana, Tanatorn; Bioorganic and Medicinal Chemistry; vol. 28; 1; (2020);,
Bromide – Wikipedia,
bromide – Wiktionary

Electric Literature of 583-75-5, A common heterocyclic compound, 583-75-5, name is 4-Bromo-2-methylaniline, molecular formula is C7H8BrN, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 4-bromo-2-methylaniline (1 g, 5.37 mmol,) in 1,4-dioxane (11 mL) and H2O (4 mL), at r. t. , were added Et3N (2.7 mL, 1.2 eq) and BOC20 (4.2 g, 1.2 eq). The reaction mixture was stirred at r. t. for 96 hr. Sat. aq. NH4CI and EtOAc (20 mL) were added and the phases were separated. The aqueous layer was further extracted with EtOAc (2X20 mL). The combined organic extracts were dried over anh. NA2SO4, the solids were filtered and the solvent evaporated. The residue was purified by SCX Column (Eluents : CH2CI2, MeOH and NH3 (0.5 M in MEOH)) to give the title compound as a white solid (1.22 g, 79%). NMR (‘H, DMSO-D6) : 8 8.55 (s, 1H), 7.35 (m, 1H), 7.28 (m, 2H), 2.17 (s, 3H), 1.44 (s, 9H). MS (m/z) : 230 [MH-TBU] + ; 186 [MH-BOC] +.

The synthetic route of 583-75-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SB PHARMCO PUERTO RICO INC; NEUROCRINE BIOSCIENCES INC; GLAXO GROUP LIMITED; WO2004/62665; (2004); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Electric Literature of 21120-91-2,Some common heterocyclic compound, 21120-91-2, name is 7-Bromobicyclo[4.2.0]octa-1,3,5-triene, molecular formula is C8H7Br, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

In a 250 ml rbf with magnetic stir bar was added aminophenol (1 g, 1 eq), THF (15 ml) and KOtBu (1.23 g, 1.2 eq). The mixture was allowed to stir for 1 hour at room temperature. Bromo BCB (1.68 g, 1 eq) was added in THF (15 ml). The reaction was capped and allowed to stir for 12 h at room temperature. Water (100 ml) was then added. Ethyl acetate (3×100 ml) was used to extract the product from the aqueous phase. The combined organics were dried over sodium sulfate, filtered and concentrated in vacuo. The crude residue was subjected to a column of silica gel using heptanes and ethyl acetate (9:1) as eluent to give product (892 mg, 46%) as a dark oil. (0077) 1H NMR (500 MHz, Chloroform-d) delta 7.32 (dt, J=6.6, 4.3 Hz, 1H), 7.28-7.23 (m, 2H), 7.18 (d, J=7.4 Hz, 1H), 6.86 (d, J=9.0 Hz, 2H), 6.69 (d, J=9.0 Hz, 2H), 5.59 (dd, J=4.3, 2.1 Hz, 1H), 3.66 (dd, J=14.1, 4.3 Hz, 1H), 3.46 (br s, 2H), 3.28 (d, J=14.1 Hz, 1H). 13C NMR (126 MHz, Chloroform-d) delta 151.04, 145.18, 142.64, 140.49, 129.73, 127.29, 123.47, 123.00, 116.48, 116.36, 74.89, 39.47. DSC Showed an exotherm peak temperature at 179 C at a scan rate of 10 C/min.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 7-Bromobicyclo[4.2.0]octa-1,3,5-triene, its application will become more common.

Reference:
Patent; Rohm and Haas Electronic Materials LLC; Hayes, Colin; Gallagher, Michael K.; Riener, Michelle; (10 pag.)US2019/169327; (2019); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 10485-09-3, name is 2-Bromoindene, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 10485-09-3

A Schlenk flask was charged with a magnetic stir bar and Mg turnings (264 mg, 1 1 mmol, 6.7 eq.) and flame-dried under vacuum. After cooling, the flask was purged to N2, anhydrous THF (3 mL) was added to just cover the turnings, and stirring was commenced. Several drops of 1 ,2-dibromoethane was added as initiator, and a heat gun used to briefly reflux the contents, after which the flask was placed in a 25 C water bath. In a separate flame-dried flask under N2 atmosphere, 2-bromoindene (715 mg, 3.67 mmol, 2.2 eq.) was dissolved in 10 mL anhydrous THF. A cannula was then used to transfer this solution onto the activated magnesium turnings over 5 min, resulting in a red, opaque solution. After 1 .5 h, a separate flame-dried flask under N2 atmosphere was charged with ‘Pr2NBCI2(0.3 g, 1.65 mmol, 1 .0 eq.) in 10 mL anhydrous THF and cooled to -78C. To this was added, by cannula, the Grignard solution over 10 min., and the reaction flask was brought to ambient temperature for overnight. The pale orange solution was concentrated and the residue was dissolved in CH2CI2 (30 mL). The suspension was filtered through celite and the filtrate was concentrated to provide compound 1 1 (0.56 g, quant.) as a yellow powder.11B NMR (128 MHz, CD2CI2) delta 40.4;1H-NMR (400 MHz, CD2CI2) 7.37 (2H, d, J = 7.6 Hz), 7.33 (2H, d, J = 7.6 Hz), 7.19 (2H, t, J = 7.6 Hz), 7.06 (2H, td, J = 7.6, 1.2 Hz), 6.81 (2H, s), 3.85 (2H, m), 3.38 (4H, s), 1.25 (12H, d, J = 6.8 Hz).

According to the analysis of related databases, 10485-09-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SABIC GLOBAL TECHNOLOGIES B.V.; AL-SHAMMARI, Haif; SUN, Yunshan; STEPHAN, Douglas; AL HUBISH, Salah; JIANGTAO, Zhu; (36 pag.)WO2016/37960; (2016); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Reference of 38573-88-5, These common heterocyclic compound, 38573-88-5, name is 1-Bromo-2,3-difluorobenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Add slowly a solution of 1-methyl-piperidin-4-ol (2.98 g) in DMF (20 mL) into a suspension of sodium hydride (95percent) (0.72 g) in DMF (25 mL) at room temperature. Heat the mixture in an oil bath at 65°C. After 30 MIN., add 1-bromo-2-, 3-DIFLUORO-BENZENE (5.0 g) and stir at 65°C. After 2 hr. , partition the reaction mixture between water and ether, dry over ANHYDROUS sodium sulfate, and evaporate to give a yellow oil. Separate on a silica gel column (110 g, solvent: ether, ETHER-2M NH3 in methanol 19: 1,9 : 1) to obtain 4- (2-bromo-6-fluoro-phenoxy)-1-methyl-piperidine (4.06 g, 54percent yield) and the title compound (1.60 g, 21percent yield). Mass spectrum (electric spray) M/Z = 288 (M+L), 290 (M+2+1) ;1H NMR (CDC13) : 7.12 (m, 1H), 6.92 (m, 2H), 4.30 (m, 1H), 2.69 (m, 2H), 2.30 (s, 3H), 2.28 (m, 2H), 1.97 (m, 2H), 1. 89 (m, 2H).

The synthetic route of 38573-88-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ELI LILLY AND COMPANY; WO2004/94380; (2004); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

These common heterocyclic compound, 348-57-2, name is 1-Bromo-2,4-difluorobenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C6H3BrF2

2,4-difluorobromobenzene (3 g, 15.5 mmol) and 260 mg of iron filings were placed in a two-neck flask, and 15 ml of dichloromethane was then added thereto. The two-neck flask was cooled in an ice bath, and a solution including bromine (1 ml, 18.7 mmol) and 15 ml of dichloromethane was added dropwise to the two-neck flask using an isobaric funnel. Next, the contents in the two-neck flask were heated under reflux for 3 hours. During heating, brown gas was produced. Then, the temperature was reduced to 20 C., and 50 ml of a sodium metabisulfite (Na2S2O5) aqueous solution (10%) was mixed with the contents in the two-neck flask by stirring for 1 hour for terminating the reaction therein. Thereafter, the contents in the two-neck flask were washed several times with deionized water to collect an organic layer, the organic layer was dehydrated using sodium sulfate (Na2SO4), and the solvent in the organic layer was removed, followed by column chromatography (SiO2, n-hexane), thereby obtaining white crystals (3.5 g, 83% yield). (0067) The spectrum analysis for the white crystals is: 1H NMR (400 MHz, CDCl3): delta 7.74 (t, J=7.6 Hz, 1H), 6.96 (t, J=8.0 Hz, 1H); 19F NMR (376 MHz, CDCl3, 298 K): delta -103.8 (dd, J=7.5 Hz, J=7.5 Hz). The white crystals were confirmed to be Compound L3-1 having a chemical structure represented by

The synthetic route of 1-Bromo-2,4-difluorobenzene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NATIONAL TSING HUA UNIVERSITY; Chi, Yun; Tong, Bi-Hai; Duan, Tai-Nan; Ku, Hsiao-Yun; Chen, I-Jen; US9219237; (2015); B1;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 38573-88-5, name is 1-Bromo-2,3-difluorobenzene, A new synthetic method of this compound is introduced below., 38573-88-5

4-(4,4,5,5-Tetramethyl-[1,3,2]dioxaborolan-2-yl)-1H-indole 3b (1.22 g, 5 mmol) was dissolved in 20 mL of tetrahydrofuran under stirring under an argon atmosphere, and 1-bromo-2,3-difluoro-benzene (0.97 g, 5 mmol), tetrakis (triphenylphosphine) palladium (0.17 g, 0.15 mmol) and 7 mL of sodium hydroxide solution (2M) were then added to the solution. Upon completion of the addition, the reaction system was stirred at 75°C in an oil bath overnight. The reaction was completed until TLC showed the disappearance of starting materials. The reaction mixture was naturally cooled down to room temperature and extracted with ethyl acetate (20 mL*3). The combined organic extracts were washed with saturated brine (10 mL), dried over anhydrous sodium sulfate, filtered to remove the drying agent and concentrated under reduced pressure. The resulting solid was purified by silica gel column chromatography to give the title compound 4-(2,3-difluoro-phenyl)-1H-indole 3c (800 mg, yield 70percent) as a white solid. MS m/z (ESI): 228.4[M-1]

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Jiangsu Hengrui Medicine Co., Ltd.; Shanghai Hengrui Pharmaceutical Co. Ltd.; EP2179998; (2010); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Electric Literature of 59907-13-0, These common heterocyclic compound, 59907-13-0, name is 2-Bromo-1-fluoro-3-methylbenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A 10 mL round-bottomed flask was charged with 2-bromo-l-fluoro-3- methylbenzene (0.13 mL, 0.70 mmol, Sigma-Aldrich, St. Louis, MO) and tetrahydrofuran (2.0 mL). The solution was cooled to -78 C, n-butyllithium (0.28 mL of a 2.5 M solution with hexane, 0.70 mmol, Sigma-Aldrich, St. Louis, MO) was added, and then the reaction mixture was stirred for 30 min. After that time, a solution of N-(l-benzofuran-2-ylmethylidene)-3,4-dihydro-2H-l,5- benzodioxepine-7-sulfonamide (intermediate A) (0.10 g, 0.28 mmol) and tetrahydrofuran (3.0 mL) was added. After stirring for 1 h, water (0.10 mL) was added, and the reaction mixture was warmed to room temperature andconcentrated. The residue was subjected to reversed-phase preparative HPLC (Phenomenex Gemini CI 8 column (Phenomenex, Inc., Torrance, CA)(150 x 30 mm, 5 muiotaeta) eluting with 0.10% trifluroacetic acid in acetonitrile-water, gradient of 10% to 90% over 10 min) to give N-(l-benzofuran-2-yl(2-fluoro-6- methylphenyl)methyl)-3,4-dihydro-2H-l,5-benzodioxepine-7-sulfonamide (0.013 g) as a yellow film (racemic mixture).1H NMR (300 MHz, methanol-d4) delta 7.48 (m, 1 H), 7.36 – 7.30 (m, 2 H), 7.25 – 7.14 (m, 5 H), 6.97 (d, J= 6.0 Hz 1 H), 6.86 (d, J= 9.0 Hz, 1 H), 6.80 (m, 1 H), 6.51 (s, 1 H), 6.11 (s, 1 H), 4.20 – 4.15 (m, 2 H), 4.13 – 4.08 (m, 2 H), 2.41 (s, 3 H), 2.20 – 2.12 (m, 2 H). m/z (ESI, +ve ion) 490.0 (M+Na)+. GK-GKRP EC50 (LCMS/MS) = 0.79 muMu. GK-GKRP IC50 (Binding) = 1.0 muMu.

Statistics shows that 2-Bromo-1-fluoro-3-methylbenzene is playing an increasingly important role. we look forward to future research findings about 59907-13-0.

Reference:
Patent; AMGEN INC.; BARTBERGER, Michael, D.; CROGHAN, Michael, D.; FOTSCH, Christopher, H.; NORMAN, Mark, H.; PENNINGTON, Lewis, D.; REICHELT, Andreas; ST. JEAN, David, J., Jr.; TEGLEY, Christopher, M.; WO2012/138776; (2012); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Reference of 626-88-0, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 626-88-0 as follows.

General procedure: To a solution of compound 3 (0.46 g, 2 mmol), in dry DMF (5 mL), and anhydrous potassium carbonate (0.5 g, 3.4 mmol) and,an appropriate bromoalkyl halide (2 equivalent) was added. Themixturewas heated for 12 h at 80 C, and then the reaction mixturewas poured over crushed ice, filtered and washed with water toyield the desired product. The isolated crude materials were furtherpurified by silica gel chromatography, using EtOAc-hexane (3:7) toprovide the desired products. The physical characteristics andspectral data of separated products are listed below.

According to the analysis of related databases, 626-88-0, the application of this compound in the production field has become more and more popular.

Reference:
Article; Yahia, Eman; Mohammad, Haroon; Abdelghany, Tamer M.; Fayed, Eman; Seleem, Mohamed N.; Mayhoub, Abdelrahman S.; European Journal of Medicinal Chemistry; vol. 126; (2017); p. 604 – 613;,
Bromide – Wikipedia,
bromide – Wiktionary