Tag: M.W=100-200

Application of 626-88-0, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 626-88-0 as follows.

General procedure: To a solution of compound 3 (0.46 g, 2 mmol), in dry DMF (5 mL), and anhydrous potassium carbonate (0.5 g, 3.4 mmol) and,an appropriate bromoalkyl halide (2 equivalent) was added. Themixturewas heated for 12 h at 80 C, and then the reaction mixturewas poured over crushed ice, filtered and washed with water toyield the desired product. The isolated crude materials were furtherpurified by silica gel chromatography, using EtOAc-hexane (3:7) toprovide the desired products. The physical characteristics andspectral data of separated products are listed below.

According to the analysis of related databases, 626-88-0, the application of this compound in the production field has become more and more popular.

Reference:
Article; Yahia, Eman; Mohammad, Haroon; Abdelghany, Tamer M.; Fayed, Eman; Seleem, Mohamed N.; Mayhoub, Abdelrahman S.; European Journal of Medicinal Chemistry; vol. 126; (2017); p. 604 – 613;,
Bromide – Wikipedia,
bromide – Wiktionary

Related Products of 17247-58-4, These common heterocyclic compound, 17247-58-4, name is (Bromomethyl)cyclobutane, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 12.3 g (83 mmol) of cyclobutylcarbinyl bromide (Aldrich) and 13.7g (91 mmol) of sodium iodide in 150 mL of acetone wasrefluxed overnite and then cooled to rt. The inorganic solids were filtered off and the acetone and cyclopropylcarbinyl iodide (8.41g, 46%) distilled off at ambient and 150 torr at 80 C, respectively. A solution of 4.0 g (21.98 mmol) of cyclobutyl carbinyl iodide in 30mL of anhydrous diethyl ether(Et20) cooled to-78 C was cannulated into a solution of 17 mL (21.98 mmol) of 1.3M sec-butyl lithium in cyclohexanes and the solution was stirred for 5 min. To this mixture was cannulated a solution of 3.0 g (21.98 mmol) of freshly distilled sulfuryl chloride in 110mL of hexanes cooled to-78 C, the mixture warmed to rt over 1 h and was then carefully concentrated in vacuo. This mixture was redissolved inEt20, washed once with some ice-cold water, dried(MgS04) and concentrated carefully. This mixture was redissolved in 30mL of THF, added dropwise to 500 mL of saturated NH3 in THF and was allowed to stirovernite. The mixture was concentrated in vacuo to a crude yellow solid and was recrystallized from the minimum amount ofCH2Cl2 in hexanes with 1-2 drops of MeOH to afford 1.39 g(42%) of cyclobutyl carbinylsulfonamide as a whitesolid.’H NMR(CDCI3) 1.81-2. 03 (m, 4H), 2.14-2. 28 (m, 2H), 2.81-2. 92 (m,1H), 3.22 (d, J=7 Hz, 2H), 4.74 (brs, 2H); 3C NMR (CD3)8 19.10, 28.21, 30.64, 60.93 ; MS m/e 148(M-l)-. time: 1.73, method B), 818 (M++H).

Statistics shows that (Bromomethyl)cyclobutane is playing an increasingly important role. we look forward to future research findings about 17247-58-4.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; WO2003/99274; (2003); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Related Products of 10269-01-9, These common heterocyclic compound, 10269-01-9, name is (3-Bromophenyl)methanamine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

(2S)-1 -[(tert-butoxy)carbonyl]pyrrolidine-2-carboxylic acid (6.45 g, 29.97 mmol, 1 .00 equiv), HOBT (4.05 g, 29.97 mmol, 1 .00 equiv), EDCI (5.76 g, 30.05 mmol, 1 .00 equiv), and (3- bromophenyl)methanamine (5.55 g, 29.83 mmol, 1 .00 equiv) were dissolved in Nu,Nu-dimethylformamide at room temperature. The reaction was stirred for 2 h. Then it was quenched by the addition of water. The resulting solution was extracted with ethyl acetate and the organic layers were combined and washed with 3×50 mL of saturated aqueous sodium bicarbonate, brine, and concentrated in vacuo. This resulted in 1 0 g (87%) of tert-butyl (2S)-2-[[(3-bromophenyl)methyl]carbamoyl]pyrrolidine-1 -carboxylate as a white solid.

The synthetic route of 10269-01-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ZALICUS PHARMACEUTICALS, LTD.; SHORT, Glenn, F., III; ROMERO, Donna, L.; LEE, Margaret, S.; WO2015/130957; (2015); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 58534-95-5, name is 3-Bromo-2-fluoroaniline, This compound has unique chemical properties. The synthetic route is as follows., Safety of 3-Bromo-2-fluoroaniline

A mixture of 2,2,2-Trichloroethane-1,1-diol (8.09 g, 49.33 mmol) and Na2SO4 (53 g, 370 mol) were dissolved in water and warmed to 35C. 3-bromo-2- fluorobenzenamine (7.77 g, 41.11 mmol) in water was added, followed by 35% aqueous HC1 (4.6 mL) and hydroxylamine hydrochloride (9.08 g, 131.6 mol). The resultingmixture was heated to 90C for 16 h and yellow precipitate was formed. The mixture was cooled to room temperature, the solid was filtered, washed with water, and dried in the air to afford the desired product (6.5 g, 61% yield)

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 58534-95-5.

Reference:
Patent; ARAXES PHARMA LLC; LI, Liansheng; FENG, Jun; LONG, Yun Oliver; LIU, Yuan; WU, Tao; REN, Pingda; LIU, Yi; (246 pag.)WO2017/87528; (2017); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Reference of 583-68-6, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 583-68-6 name is 2-Bromo-4-methylaniline, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: To a solution of 2-bromoaniline (5 g, 29 mmol) dissolved in CH3CN (80 mL) was added aq. HCl (15 mL conc. HCl in 50 mL water), then the mixture was cooled to 0 C, and it was added a solution of NaNO2 (2.4 g, 34.87 mmol) in water (50 mL). After addition, the reaction was kept at the temperature lower than 5 C for 30 min and it was added a solution of (7.23 g, 43.59 mmol) in water (50 mL). After addition, the reaction was kept at room temperature overnight, poured into water (300 mL) and extracted with CH2Cl2.The organic phase was dried over MgSO4. After workup, the brown oily product was distilled to afford a pale-yellow.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-Bromo-4-methylaniline, and friends who are interested can also refer to it.

Reference:
Article; Lv, Jun; Liu, Qiancai; Tang, Jie; Perdih, Franc; Kranjc, Kristof; Tetrahedron Letters; vol. 53; 39; (2012); p. 5248 – 5252;,
Bromide – Wikipedia,
bromide – Wiktionary

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 348-57-2, name is 1-Bromo-2,4-difluorobenzene, This compound has unique chemical properties. The synthetic route is as follows., Formula: C6H3BrF2

To a suspension of l-bromo-2,4-difluorobenzene (lOg, 52.1mmol, l.Oeq) in cold H2SO4 (37.9mL) was added Conc.HN03 (33.3mL) in a dropwise manner keeping the internal temp 20°C, stirred for 10 min at 0°C then, the reaction mixture was poured into a mixture of diethyl ether (250mL) and ice water (250mL) with vigorous stirring. The organic layer was separated and the aqueous layer was again extracted with Et20 (250mL). The combined organic layer was washed with Satd. sodium bicarbonate (2 X 200 mL) followed by satd. brine (2 X 200 mL) solution. The separated organic layer was dried over Na2S04 and concentrated under reduced pressure to give crude product which was purified by column chromatography (SiO 100-200 mesh) using 15percent EtOAc in pet ether as an eluent to give l-bromo-2,4-difluoro-5 -nitrobenzene (52g, 72percent yield) as a yellow color liquid. LCMS: M+H]+ 272.23.

According to the analysis of related databases, 348-57-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ONTARIO INSTITUTE FOR CANCER RESEARCH (OICR); AL-AWAR, Rima; ZEPEDA-VELAZQUEZ, Carlos Armando; PODA, Gennady; ISAAC, Methvin; UEHLING, David; WILSON, Brian; JOSEPH, Babu; LIU, Yong; SUBRAMANIAN, Pandiaraju; MAMAI, Ahmed; PRAKESCH, Michael; STILLE, Julia Kathleen; (1053 pag.)WO2017/147700; (2017); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 7051-34-5, name is (Bromomethyl)cyclopropane, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7051-34-5, HPLC of Formula: C4H7Br

Cyclopropyl methyl bromide (1.4 ml, 14.46 mmol), sodium iodide (0.986 g, 6.6 mmol) and potassium carbonate (3.64 g, 26.3 mmol) were added sequentially to a stirred solution of 4-hydroxybenzoic acid methyl ester (2.0 g, 13.14 mmol), in 25 ml of acetone at room temperature and the mixture was refluxed for 44 h. The solvent was evaporated to obtain a residue to which 10% NaOH (80 ml) was added. The solution was extracted with DCM twice. The combined DCM layers were washed with water and brine and dried over anhydrous Na2SO^ The solvent was evaporated to obtain 2.5 g (92.25%) of 4- cyclopropylmethoxybenzoic acid methyl ester. LCMS: [M+H]+ 270.3; IH-NMR (CDCl3): 7.964-7.986 (d, 2H, J=8.8 Hz), 6.895-6.917 (d, 2H, J=8.8 Hz), 3.879 (s, 3H), 3.849-3.867 (d, 2H, J=7.2 Hz), 1.262-1.281 (m, IH), 0.639-0.671 (m, 2H), 0.360-0.372 (m, 2H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; FOREST LABORATORIES HOLDINGS LIMITED; SARMA, Pakala, Kumara Savithru; ACHARYA, Vinod, Parameshwaran; KASIBHATLA, Srinivas, Rao; VISWANADHAN, Vellarkad, Narayana; SHEKHAR, Polisetti; BISCHOFF, Alexander; WO2010/127212; (2010); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 399-94-0, name is 1-Bromo-2,5-difluorobenzene, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 399-94-0, HPLC of Formula: C6H3BrF2

Step 1 : tert-Butyi 4-(2,5-difluorophenyl)piperazine-l-carboxylate (0991) [00346] To a solution of A19-1 (500 mg, 2.59 mmol, 1.0 eq), A19-1A (579 mg, 3.11 mmol, 1.2 eq), BINAP (161 mg, 0.259 mmol, 0.1 eq), f-BuONa (498 mg, 5. 18 mmol, 2.0 eq) and Pdi(dba)3 (119 mg, 0.130 mmol, 0.05 eq) in toluene (5 mL). The reaction mixture was stirred at 110 C for 16 hours. The reaction mixture was concentrated under reduced pressure. The mixture was diluted with water (10 mL) and the resultant mixture was extracted with DCM (30 mL * 3). The combined organic layers were dried over NaiSOzt, filtered and concentrated to dryness under reduced pressure. The residue was purified by column chromatography over silica gel (petroleum ether: ethyl acetate = 1 : 0 to 10: 1) to afford the title compound (400 mg, 52% yield) as a yellow solid. NMR (400MHz, COC -d) delta 7.01 – 6.90 (m, 1H), 6.66 – 6.56 (m, 2H), 3.65 – 3.53 (m, 4H), 3.07 – 2.93 (m, 4H), 1.48 (s, 9H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Bromo-2,5-difluorobenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; VIVACE THERAPEUTICS, INC.; LIN, Tracy Tzu-Ling Tang; KONRADI, Andrei W.; VACCA, Joseph; SHEN, Wang; COBURN, Craig; (231 pag.)WO2017/58716; (2017); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Reference of 2550-36-9, The chemical industry reduces the impact on the environment during synthesis 2550-36-9, name is (Bromomethyl)cyclohexane, I believe this compound will play a more active role in future production and life.

General procedure: The solution of dihydroxyacetophenone (1, 1.0equiv), anhydrous potassium carbonate (2.0equiv) and corresponding alkyl bromides (2, 1.1equiv) in acetonitrile was stirred at 70-80C for 4-5h. After evaporation of acetonitrile, the reaction mixture was diluted with dichloromethane and washed with water three times. The organic layer was dried with anhydrous sodium sulfate and evaporated under reduced pressure. The crude product was purified by column chromatography to give 3.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, (Bromomethyl)cyclohexane, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Venkateswararao, Eeda; Sharma, Vinay K.; Yun, Jieun; Kim, Youngsoo; Jung, Sang-Hun; Bioorganic and Medicinal Chemistry; vol. 22; 13; (2014); p. 3386 – 3392;,
Bromide – Wikipedia,
bromide – Wiktionary

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 2695-47-8, name is 6-Bromo-1-hexene, This compound has unique chemical properties. The synthetic route is as follows., category: bromides-buliding-blocks

General procedure: In a 100mL 3-necked flask, 4?-hydroxy-[1, 1?-biphenyl]-4-carbonitrile (1) (5.00g, 25.61mmol), 3-bromoprop-1-ene (2a) (3.72g, 30.74mmol), K2CO3 (7.43g, 53.79mmol), and N, N-dimethylformamide (DMF) (50mL) were added in turn. Following this, the reaction mixture was stirred for 12hat 60C, and then poured into DCM. The organic layer was washed with water. After removing the solvent, the crude product obtained was purified through column chromatography (DCM/PE=1/3, v/v; where PE is petroleum ether, boiling range: 60-90C) to give white crystals (5.08g, 84% yield).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 2695-47-8.

Reference:
Article; Zhu, Shengbo; Chigan, Jin; Li, Wei; Yang, Jingyu; Chen, Weixing; Zhang, Wenzhi; Niu, Xiaoling; Chen, Xinbing; An, Zhongwei; Journal of Molecular Liquids; vol. 296; (2019);,
Bromide – Wikipedia,
bromide – Wiktionary