Tag: M.W=100-200

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1003-99-2, name is 2-Bromo-5-fluoroaniline, This compound has unique chemical properties. The synthetic route is as follows., name: 2-Bromo-5-fluoroaniline

2-Bromo-5-fluoro-N-(propan-2-yl)aniline E-1.7″” ‘ 2-bromo-5-fluoroaniline E-1.7″”” (2.00 g; 10.53 mmol) is suspended in 20 ml DCM and propan-2-one (1.55 ml; 21.05) is added and the reaction mixture is stirred for 16 at 20°C. Afterwards sodium triacetoxyborohydride (4.69 g; 21.05 mmol) is added and the reaction mixture is stirred for 48h at 20 °C. The reaction mixture is poured into water and extracted with DCM. The combined organic layer is dried over MgS04 the solid materials are filtered off and HCl in dioxane is added until the pH value is below 2. The solvents are concentrated under reduced pressure. The crude product is purified using reversed phase chromatography (Method: prep. HPLC1). Product containing fractions are combined and extracted with DCM. To the organic layer HCl in dioxane is added until the pH value is below 2. The solvents are concentrated under reduced pressure. Yield 91percent (2.57 g; 9.58 mmol) HPLC-MS: tRet = 1.09 min; method VAB

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1003-99-2.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; ENGELHARDT, Harald; WO2015/169962; (2015); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Reference of 553-94-6,Some common heterocyclic compound, 553-94-6, name is 2,5-Dimethylbromobenzene, molecular formula is C8H9Br, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

K3PO4 (212 mg, 1 mmol),aryl halides (0.5mmol) and phenylboronicacid (0.75 mmol) were added successively into a dried Schlenk tubewith a magnetic bar under nitrogen. Then a N,N-dimethylacetamide (DMA 0.05 mL) solution of tetraphosphine TPPDA (0.0005 mmol) andPdCl2 (0.0005 mmol), which was reacted at 100 C for 1 h prior to use,was added into the mixture. Afterwards, o-xylene (3 ml) was addedwith syringe. After being stirred for the required time in the preset con-ditions, the reaction mixture was cooled to room temperature. The mix-ture solution was extracted with ethyl acetate (3 5 mL). Combinedorganic phase was washed with brine (3 5 mL) and dried over anhy-drous MgSO4. The dried solution was ltered and puried by silica gelchromatography (petroleum ether 60-90 C) to give a correspondingproduct. Reaction condition: aryl halides 0.5 mmol, phenylboronic acid 0.75 mmol, K3PO4 1.0mmol, o-xylene 3 mL, catalyst PdCl2/TPPDA = 1/1, 90 C, under nitrogen, GC yields.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2,5-Dimethylbromobenzene, its application will become more common.

Reference:
Article; Guo, Fei-Chen; Zhou, Rong; Jiang, Zhi-Jie; Wang, Wei; Fu, Hai-Yan; Zheng, Xue-Li; Chen, Hua; Li, Rui-Xiang; Catalysis Communications; vol. 66; (2015); p. 87 – 90;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 626-88-0, name is 1-Bromo-4-methylpentane, A new synthetic method of this compound is introduced below., Formula: C6H13Br

To a solution of the 1H-indazol-5-ol (100 mg, 0.745 mmol) obtained in Reference Example 4 in N,N-dimethylformamide (2 ml) were added 1-bromo-4-methylpentane (0.109 ml, 0.745 mmol), tetrabutylammonium iodide (28 mg, 0.1 mmol) and potassium carbonate (103 mg, 0.745 mmol), and the resulting mixture was heated to 60C. After 9 hours, the mixture was poured into water (20 ml) and extracted with ethyl acetate (20 ml x 2). The organic layer was dried over anhydrous magnesium sulfate and concentrated under reduced pressure, and the resulting residue was purified by a silica gel column chromatography (eluent: hexane/ethyl acetate) to obtain 5-[(4-methylpentyl)oxy]-1H-indazole (60 mg, 37%). Melting point: 124-126C

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Sumitomo Pharmaceuticals Company, Limited; EP1403255; (2004); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 656-64-4, name is 3-Bromo-4-fluoroaniline, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 656-64-4, category: bromides-buliding-blocks

Compound III (63.0g, 387.5mmol) and ethanol (300 mL) was added 1L three-necked flask, dissolved under stirring, 3-bromo-4-fluoroaniline (81.0g, 426.3mmol), was added dropwise at room temperature NaHCO3(81.4g, 969.1mmol) was dissolved in 250mL of water was added, was warmed to 60 , reaction was 12 hours (complete reaction was monitored by TLC); and the reaction solution was transferred to a 1L round-bottom flask, ethanol was evaporated under reduced pressure, the residue was The organic layer was extracted three times with ethyl acetate (200mL × 3) were combined, washed twice with saturated NaCl solution, dried over anhydrous Na2SO4Drying; filtration, the filtrate was concentrated under reduced pressure to dryness, ethyl acetate / hexane to, filtration, and drying 45 deg.] C to give 76.0 g white solid, a yield of 62.0%.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Bromo-4-fluoroaniline, and friends who are interested can also refer to it.

Reference:
Patent; China Pharmaceutical University; Zhu Qihua; He Guangchao; Dong Zhongxia; Shan Jinxi; Wang Junjie; Xu Kexin; Xu Yungen; (11 pag.)CN108101899; (2018); A;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 3814-30-0, name is (Bromomethyl)cyclopentane, A new synthetic method of this compound is introduced below., Safety of (Bromomethyl)cyclopentane

To a solution of 3-cyclopropylimidazo[1 ,5-a]pyrazin-8(7H)-one (300 mg, 1.71 (0680) mmol) in anhydrous DMF (5 mL) was added K2C03 (355 mg, 2.57 (0681) mmol) and (bromomethyl)cyclopentane (335 mg, 2.05 mmol). The reaction was stirred at 65C for 16 hours. The mixture was filtered and the filtrate was purified by preparative LC- MS to yield 7-(cyclopentylmethyl)-3-cyclopropylimidazo[1 ,5-a]pyrazin-8(7H)-one 210 mg (47%). (0682) 1H NMR (DMSO-de, 400 MHz): delta 7.53 (s, 1 H), 7.51 (d, J = 6.0 Hz, 1 H), 6.90 (d, J = 6.0 Hz, 1 H), 3.69 (d, J = 7.6 Hz, 2H), 2.29-2.24 (m, 2H), 1.58-1.45 (m, 6H), 1.22-1.19 (m, 2H), 1.00- 0.89 (m, 4H). (0683) LC-MS: {m/z) 258.2 (MH+) tR (minutes, method 3) = 2.24 minutes

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; H. LUNDBECK A/S; KEHLER, Jan; RASMUSSEN, Lars, Kyhn; LANGGARD, Morten; JESSING, Mikkel; VITAL, Paulo, Jorge, Vieira; JUHL, Karsten; (159 pag.)WO2018/78042; (2018); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Application of 10485-09-3, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 10485-09-3, name is 2-Bromoindene, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: An oven-dried 10 mL reaction vial equipped with a stir bar was charged with azole heterocycles (1, 0.2 mmol, 1.0 equiv) and alkenyl bromides (2, 0.30 mmol, 1.5 equiv) in a glove box under a nitrogen atmosphere. A solution of catalytic Pd2(dba)3 (9.15 mg, 0.01 mmol, 5 mol%) and NiXantphos (11.03 mg, 0.02 mmol, 10 mol%) was stirred in 1 mL of dry tetrahydrofuran (THF) for 2 h at room temperature. Then, t-BuONa (57.7 mg, 0.6 mmol, 3.0 equiv) and reagent mixed with catalyst were added to the reaction mixture. And thenthe vial was capped. According to the temperature requirements for different products, some vials were stirred in the glove box for 24 h, but others were removed from the glove box, and stirred for 24 h at 70 or 150 . The reaction mixture was quenched with three drops of H2O, diluted with 3 mL of ethyl acetate, and filtered over a pad of silica. The pad was rinsed with ethyl acetate (15-25 mL), and the combined solutions were concentrated in vacuo. The crude material was loaded onto a deactivated silica gel column and purified by flash chromatography to afford the desired product.

The chemical industry reduces the impact on the environment during synthesis 2-Bromoindene. I believe this compound will play a more active role in future production and life.

Reference:
Article; Yao, Yun-Xin; Fang, Dong-Mei; Gao, Feng; Liang, Xiao-Xia; Tetrahedron Letters; vol. 60; 1; (2019); p. 68 – 71;,
Bromide – Wikipedia,
bromide – Wiktionary

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 53078-85-6, name is 2-Bromo-5-methylaniline, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 53078-85-6

The corresponding imidazopyridine (0.2 mmol) was added sequentially to a 25 ml Schlenk tube filled with oxygen and equipped with a magnetic stirrer at room temperature.Cuprous chloride (0.02 mmol), 2-bromo-5-methylaniline (0.2 mmol),1,10-azaphenanthroline (0.04 mmol), sodium carbonate (0.4 mmol), adding carbon disulfide (0.2 mmol), DMSO (2.0 mL) with a syringe under oxygen, and placing the reaction tube in a 110 C oil bath with stirring 6 hour. The obtained solution was cooled to room temperature, 2 mL of deionized water was added to the reaction liquid, and the mixture was uniformly mixed. Each time, 3 mL of ethyl acetate was used as an extracting agent, and the crude product was extracted from the reaction liquid by a liquid separation extraction operation, and the extract was combined. The solvent was removed by a rotary evaporator; the residue was purified on a silica gel column (yield: 200 mesh to 300 mesh, eluent petroleum ether / ethyl acetate (7:1 v/v)) to give the desired product 61.0 mg. The yield was 76%.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 53078-85-6.

Reference:
Patent; Qingdao University of Science and Technology; Yang Daoshan; Yan Qiuli; (17 pag.)CN110294757; (2019); A;,
Bromide – Wikipedia,
bromide – Wiktionary

Some common heterocyclic compound, 1003-99-2, name is 2-Bromo-5-fluoroaniline, molecular formula is C6H5BrFN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application In Synthesis of 2-Bromo-5-fluoroaniline

2-Bromo-5- fluorobenzenamine (15 g, 78.94 mmol) was weighed into a 100 mL flask and dissolved in 100 mL of 6N HCl. The reaction mixture was heated to reflux, followed by dropwise addition of (E)-but-2-enal (6.87 ml, 83 mmol) mixed with 1.0 mL deionized water over 25 minutes. Following complete addition, the reaction was heated at 100 °C for an additional 35 minutes. The reaction was cooled to ambient temperature, followed by addition of 50 mL of Et2O. The reaction was stirred for 5 minutes followed by removal of Et2O by separatory funnel. ZnCl2 (3.587 g, 26 mmol) was added to the aqueous layer in two portions and the reaction mixture was cooled to 0 0C over 30 minutes. The aqueous layer was then taken to pH 8.0 using concentrated NH4OH. The aqueous layer was then extracted with Et2O and then EtOAc. The combined organic phases were dried over Na2SO4, filtered and concentrated in vacuo, affording the desired product 8-bromo-5-fluoro-2-methylquinoline (18.1 g, 95 percent yield) as a solid.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1003-99-2, its application will become more common.

Reference:
Patent; ARRAY BIOPHARMA INC.; WO2008/121687; (2008); A2;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 1647-26-3, name is 1-Bromo-2-cyclohexylethane, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1647-26-3, Safety of 1-Bromo-2-cyclohexylethane

To a solution of chloro-6-methyl-2-[2-(methyloxy)phenyl]-4(1 H)-pyrimidinone (0.42g, 1.7 mmoles) in DMF were added lithium hydride (0.027g, 3.4 mmoles), lithium bromide (0.436g, 5.0 mmoles), and 2-cyclohexylethyi bromide (1.6g, 8.4 mmoles). Upon stirring overnight at room temperature, the reaction was quenched with saturated ammonium chloride, extracted with ethyl acetate. The combined organic layers were washed with brine, dried over sodium sulfate, filtered, concentrated in vacuo and the residue purified by flash chromatography (0-30% ethyl acetate/hexane) to afford the desired product (0.23g, 38%). Subsequent deprotection using BBr3 was accomplished to produce the title compound (0.2g, 90%). MS (m/z): 347.2 [M+ H]+.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; SMITHKLINE BEECHAM CORPORATION; WO2007/62370; (2007); A2;,
Bromide – Wikipedia,
bromide – Wiktionary

Electric Literature of 5433-01-2, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 5433-01-2, name is 1-Bromo-3-isopropylbenzene, This compound has unique chemical properties. The synthetic route is as follows.

Method 72; 3-Isopropylbenzoic acid; A solution of l-bromo-3-isopropylbenzene (500 mg, 2.51 mmol) in pentane/ether (1:1; 8 ml) was treated with t-butyllithium (1.7 M in pentane, 3.0 ml) at -78 C. The mixture was stirred at -78 0C for 10 min and then CO2 (g) was bubbled into the mixture for several minutes. The reaction was quenched with 10% HCl and extracted with EtOAc. The organic layer was dried with NaCl (sat) then Na2SO4 (s). The solvents were removed under reduced pressure to give a white solid (379 mg, 92%); m/z 166.

The chemical industry reduces the impact on the environment during synthesis 1-Bromo-3-isopropylbenzene. I believe this compound will play a more active role in future production and life.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2006/40568; (2006); A1;,
Bromide – Wikipedia,
bromide – Wiktionary