Tag: M.W=200-300

Some common heterocyclic compound, 4885-18-1, name is 1-(3-Bromophenyl)-N,N-dimethylmethanamine, molecular formula is C9H12BrN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Computed Properties of C9H12BrN

Dimethylamine 49 (1.31 g, 6.13 mmol) was dissolved in anhydrous THF (15 ml) under Ar(g) in a flame-dried round-bottomed flask equipped with a reflux condenser. To facilitate generation of the Grignard reagent, a catalytic amount of 12 was added to the solution. Crushed magnesium turnings (223 mg, 9.2 mmol) were then added to this solution, and the resulting solution was heated at reflux for 2 hr to generate the Grignard reagent. In a separate flamed-dried flask, diethyl phosphite (237 mul, 1.84 mmol) was dissolved in anhydrous THF (1.0 ml), and cooled to 0 C. with an ice bath. The solution of Grignard reagent was added dropwise to this solution, and the resulting solution was allowed to warm to room temperature and stirred overnight. The reaction mixture was then quenched with water (1 ml), and the solvent was removed under reduced pressure. The residue was dissolved in CH2Cl2, and the resulting solution was washed with water and brine. The combined organic extracts were dried over anhydrous MgSO4(s) and filtered, and the solvent was removed under reduced pressure. The residue was purified by flash chromatography (silica gel, 20% v/v MeOH in CH2Cl2) to give phosphine oxide 50 as a colorless oil in 66% yield. 1H NMR (CDCl3, 400 MHz) delta 8.06 (d, J=1.2 Hz, 1H), 7.69 (s, 1H), 7.66 (s, 1H), 7.58 (t, J=7.5 Hz, 2H), 7.54 (dd, J=8.9, 1.2 Hz 2H), 7.45 (dd, J=7.6, 3.1 Hz 2H), 3.45 (s, 4H), 2.22 (s, 12H) ppm; 13C NMR (CDCl3, 100.6 MHz) delta 140.22 (d, J=10.7 Hz), 133.45, 132.15, 131.31 (d, J=12.2 Hz), 129.67 (d, J=11.2 Hz), 129.14 (d, J=12.2 Hz), 64.06, 45.58 ppm; 31P NMR (CDCl3, 161 MHz) delta 22.02 ppm; MS (ESI) m/z 288.0393 (MH+[C18H25N2OPH+]=288.0383).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4885-18-1, its application will become more common.

Reference:
Patent; Wisconsin Alumni Research Foundation; Raines, Ronald T.; Tam, Annie; Soellner, Matthew B.; US8410247; (2013); B2;,
Bromide – Wikipedia,
bromide – Wiktionary

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 858121-94-5, name is 4-(Bromomethyl)-1,1-difluorocyclohexane, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 4-(Bromomethyl)-1,1-difluorocyclohexane

General procedure: DIPEA (778 muIota, 4.46 mmol) was added dropwise to a stirred solution of N-(2-hydroxyethyl)-4- (2H-tetrazol-5-yl)benzenesulfonamide (300 mg, 1.1 14 mmol, Intermediate 17′) and 2- (bromomethyl)tetrahydro-2H-pyran (285 muIota, 2.228 mmol, commercial source: Aldrich) in N,N- Dimethylformamide (DMF) (3714 muIota) at rt under nitrogen. The mixture was stirred at rt for 3 days. As starting material remained, it was stirred at 70 C overnight. The mixture was concentrated under reduced pressure. The crude compound was purified by flash column chromatography (silica; EtOAc-cyclohexane from 0/100 to 50/50). The desired fractions were collected and concentrated in vacuo to obtain the product as a racemic mixture N-(2- hydroxyethyl)-4-(2-((tetrahydro-2H-pyran-2-yl)methyl)-2H-tetrazol-5-yl)benzenesulfonamide (49 mg, 0.133 mmol, 28%). NMR (400 MHz, Acetone-d6) delta 7.84-7.78 (m, 2H), 7.56-7.50 (m, 2H), 7.33 (t, J = 5.9 Hz, 1 H), 4.37-4.32 (m, 2H), 4.25 (t, J = 5.6 Hz, 1 H), 3.50-3.44 (m, 1 H), 3.38-3.32 (m, 1 H), 2.94-2.90 (m, 2H), 2.86-2.80 (m, 1 H), 2.41-2.37 (m, 2H), 1.40-1.25 (m, 2H), 1.12-0.85 (m, 4H). MS m/z [M-H]”= 366.2

According to the analysis of related databases, 858121-94-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY DEVELOPMENT LIMITED; ALEMPARTE-GALLARDO, Carlos; ENCINAS, Lourdes; ESQUIVIAS PROVENCIO, Jorge; (206 pag.)WO2019/34729; (2019); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 3972-64-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3972-64-3, name is 1-Bromo-3-(tert-butyl)benzene belongs to bromides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

1-bromo-3-(tertbutyl)benzene (300 mg, 1.41 mmol) was dissolved in dry THF (5 mL) at -78 C under nitrogen and was stirred for 10 min. n-BuLi (2.5 M in hexanes, 2.0 mL, 4.9 mmol) was added drop wiseto the solution was stirred for 2 h at -78 C. After two hours, ethyl fluoroacetate (0.16 mL, 1.69mmol) was added drop wise and stirred for 1 min at -78 C upon which the mixture was then quenched with NH4Cl (20 mL) and warmed to room temp. The mixture was then extracted withether (50 mL), and dried over MgSO4. After concentration in vacuo (note: remove shortly afterthe ether is removed, because the compound is quite volatile), the residue was purified with flash chromatography over silica gel (hexane: ethyl acetate = 90:10) to yield the product as a yellowliquid in 43percent yield (0.12 g).

The synthetic route of 1-Bromo-3-(tert-butyl)benzene has been constantly updated, and we look forward to future research findings.

Reference:
Article; Camerino, Eugene; Wong, Dawn M.; Tong, Fan; Koerber, Florian; Gross, Aaron D.; Islam, Rafique; Viayna, Elisabet; Mutunga, James M.; Li, Jianyong; Totrov, Maxim M.; Bloomquist, Jeffrey R.; Carlier, Paul R.; Bioorganic and Medicinal Chemistry Letters; vol. 25; 20; (2015); p. 4405 – 4411;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 58971-11-2, name is 3-Bromophenethylamine, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 58971-11-2, Quality Control of 3-Bromophenethylamine

General procedure: Toa solution of 2a (20.0 g, 0.1 mol)and triethylamine (30.3 g, 0.3 mol) in DCM (350 mL) was added ethylchloroformate (12.9 g, 0.1 mol) dropwise at 0 oC and then stirred atroom temperature for 3 h. The reaction mixture was washed with 3M HCl (100 mL×2), dried over Na2SO4 and concentrated under reducedpressure. The residue was purified by silica gel column chromatography (PET/EA= 25:1, v/v) to afford compound 3a as colorless oil (22.3 g, 82.0%).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Bromophenethylamine, and friends who are interested can also refer to it.

Reference:
Article; Sun, Zhaozhu; Zhou, Tian; Pan, Xuan; Yang, Ying; Huan, Yi; Xiao, Zhiyan; Shen, Zhufang; Liu, Zhanzhu; Bioorganic and Medicinal Chemistry Letters; vol. 28; 18; (2018); p. 3050 – 3056;,
Bromide – Wikipedia,
bromide – Wiktionary

Some common heterocyclic compound, 68322-84-9, name is 2-Bromo-1-fluoro-4-(trifluoromethyl)benzene, molecular formula is C7H3BrF4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application In Synthesis of 2-Bromo-1-fluoro-4-(trifluoromethyl)benzene

Step F 3- 4- [3- (2-Bromo-4-trifluoromethyl-phenoxy)-5-fluoro-phenoxy]-2-methyl-phenyl}- propionic acid ethyl ester A mixture of 3- [4- (3-fluoro-5-hydroxy-phenoxy)-2-methyl-phenyl]- propionic acid ethyl ester (0.557 g, 1.75 mmol), 3-bromo-4-fluorobenzotrifluoride (0.425 g, 1.75 mmol) and 325 mesh potassium carbonate (0.29 g, 2.10 mmol) in dry DMSO (10 mL) is heated to 100 C and stirred 2.5 hours under N2. The reaction is cooled and acidified with 1 N HCI. The mixture is then diluted with Et20 and extracted with water. The organic layer is dried (Na2S04), and the solvent is removed in vacuo to afford crude product that is absorbed on silica gel and purified by flash chromatography using 5/1 hexanes/ethyl acetate to afford 0.735 g (78%) of the title compound.’H NMR (400 MHz, CDCl3) ; MS (ES+) 7w/Z mass calculated for C25H2104F4Br 540, found 558 and 560 (M + NH4, 100%).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 68322-84-9, its application will become more common.

Reference:
Patent; ELI LILLY AND COMPANY; WO2005/37763; (2005); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 327-52-6, name is 1-Bromo-2,4,5-trifluorobenzene, A new synthetic method of this compound is introduced below., Recommanded Product: 1-Bromo-2,4,5-trifluorobenzene

[0116] Into a 100 mL three- necked flask were added 4.62 g 1- bromo- 2, 4, 5- trifluorobenzene (0.022 mol) andanhydrous tetrahydrofuran (50 mL) . The resulting mixture was cooled to- 20 C. The solution of isopropylmagnesiumbromide (22 mmol) in tetrahydrofuran (22 ml, 1 M THF) was slowly added dropwise under nitrogen. After the additionwas complete, the reactants were maintained at- 20 C for later use.[0117] Cuprous bromide – dimethyl sulfide (0.41 g, 0.002 mol) was suspended in 5 ml anhydrous tetrahydrofuran. Theresulting mixture was cooled to -5 C. The Grignard reagent as obtained above was slowly added dropwise undernitrogen. After 15 min, a solution of the acridine compound as shown in the above reaction formula (4.1 g, 0.015 mol)in 30 mL tetrahydrofuran was slowly added dropwise. After additional 5 min, 50 mL saturated solution of ammoniachloride was added to quench the reaction. Into this obtained solution was added 50 mL ethyl acetate. The separatedwater layer was extracted with another 50 mL ethyl acetate. The obtained organic layers were collected together andfurther washed with saturated solution of sodium chloride and then dried over anhydrous sodium sulfate, followed byfiltration and concentration to obtain a crude product which was further treated by column chromatography to obtain acompound (5.26 g, yield 87%).1H NMR (400 MHz, CDCl3) delta 7.87?7.61 (m, 5H), 7.15?6.94 (m, 1H), 6.88 (d, J = 6.8 Hz, 1 H), 5.02 (d, J = 8.9 Hz, 1 H),4.00?3.80 (m, 1H), 2.92?2.76 (m, 1H), 2.76?2.64 (m, 1H), 2.64?2.44 (m, 2H), 2.06 (d, J = 14.6 Hz, 3H), 1.84 (s, 1 H),1.62 (s, 1H). Ms (M++1): 404.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Zhejiang Hisoar Pharmaceutical Co., Ltd; PAN, Xianhua; LI, Weijin; ZHANG, Qunhui; RUAN, Libo; YU, Wansheng; DENG, Fei; MA, Tianhua; HUANG, Mingwang; HE, Minhuan; EP2647624; (2013); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 615-59-8,Some common heterocyclic compound, 615-59-8, name is 1,4-Dibromo-2-methylbenzene, molecular formula is C7H6Br2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

In a 250 ml three-necked round-bottom flask equipped with a reflux condenser, thermometer, dropping funnel with pressure-equalizing, and magnetic stirring bar, and containing 74.9 g (0.30 mol) of 3,6-dibromotoluene, 15.5 ml (47.9 g, 0.30 mmol) of bromine was added dropwise under exposure to 500 W lamp for 3 hours at 19O0C. The resulting mixture was cooled to room temperature. Fractional distillation gave colorless liquid, b.p. 132-135°C/3 mm Hg. Yield 84.3 g (85percent).Anal. calc. for C7H5Br3: C, 25.57; H, 1.53. Found: C, 25.81; H, 1.62.1H NMR (CDCl3): delta 7.59 (m, IH, 5-H), 7.43 (m, IH, 3-H), 7.28 (m, IH, 3- H), 4.52 (s, 2H, CH2).13C NMR (CDCl3): delta 138.9, 134.6, 134.0, 133.1 , 123.0, 121.5, 32.2.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1,4-Dibromo-2-methylbenzene, its application will become more common.

Reference:
Patent; EXXONMOBIL CHEMICAL PATENTS INC.; WO2007/70041; (2007); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 112734-22-2, name is (4-Bromo-2-fluorophenyl)methanamine, A new synthetic method of this compound is introduced below., Quality Control of (4-Bromo-2-fluorophenyl)methanamine

To a solution of (4-bromo-2-fluorophenyl) methanamine (2.5 g, 12 mmol) in CH2Cl2 (50 mL) at 0 C was added di-tert-butyl dicarbonate (4.01 g, 18 mmol) and triethylamine (2.6 mL, 18 mmol). The mixture was allowed to warm to room temperature and stirred for 2h. Water was added (50 mL) and the layers were separated. The organic layer was washed with brine, dried over sodium sulfate and concentrated in vacuo. The crude product was purified by flash silica column chromatography (heptane:ethyl acetate) (1:0 to 4:1) to afford the title compound as a colorless oil. (2.7 g, 71%). 1H NMR (400 MHz, DMSO-d6) delta ppm 7.21-7.26 (m, 3 H), 4.90 (br s, H), 4.27-4.33 (m, 2 H), 1.44 (s, 9 H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Emergent Product Development Gaithersburg Inc.; Roussel, Patrick; Heim, Jutta; Schneider, Peter; Bartels, Christian; Liu, Yaoquan; Dale, Glenn; Milligan, Daniel; (107 pag.)EP3034078; (2016); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 937046-98-5,Some common heterocyclic compound, 937046-98-5, name is 7-Bromopyrrolo[2,1-f][1,2,4]triazin-4-amine, molecular formula is C6H5BrN4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a degassed solution of 7-bromopyrrolo[2,l-f][l,2,4]triazin-4-ylamine (10.0 g, 46.9 mmol) in anhydrous DMF (78 mL) and triethylamine (47 mL) was added tetrakis(triphenylphosphine)palladium(0) (2.17 g, 1.88 mmol, 0.04 eq) and copper (I) bromide dimethylsulfide complex (0.77 g, 3.75 mmol, 0.08 eq). After degassing with N2 for 5 min., propargyl alcohol (8.2 mL, 140.8 mmol, 3.0 eq) was added, and the reaction mixture was stirred at 900C for 6h. The reaction was quenched with 5% aq. NH3 in saturated aq. NH4Cl. The aqeuous layer was washed with EtOAc (Ix) followed by 25% iPrOH in DCM (3x). The combined organic layers were dried over MgSO4, filtered through a pad of celite, and concentrated at reduced pressure. The crude product was purified by MPLC eluted with 5% EtOH/DCM. Trituration from EtOAc afforded 4.75 g (53.8%) of the desired product as a yellow solid. 1H-NMR (DMSO-^6) §7.89 (s, IH), 7.88 (broad s, 2H), 6.85 (dd, 2H), 5.39 (t, IH), 4.36 (d, 2H); MS LC-MS [M+H]+ = 189, RT = 1.08 min.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 7-Bromopyrrolo[2,1-f][1,2,4]triazin-4-amine, its application will become more common.

Reference:
Patent; BAYER PHARMACEUTICALS CORPORATION; WO2007/64931; (2007); A2;,
Bromide – Wikipedia,
bromide – Wiktionary

Related Products of 502496-36-8,Some common heterocyclic compound, 502496-36-8, name is 3-Bromo-5-fluoro-2-methylaniline, molecular formula is C7H7BrFN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

[00404] 3-Bromo-5-fluoro-2-methyl-aniline (725 mg, 3.55 mmol), bis(pinacolato)diboron(1 .08 g, 4.26 mmol) and potassium acetate (1 .05 mg, 10.7 mmol) were mixed in 1 ,4-dioxane (35 mL) and nitrogen gas was blown through for 5 minutes. 1,1-Bis(diphenyl-phosphino)ferrocene- palladium(1,1)dichloride DCM adduct (174 mg, 0.21 mmol) was added and the mixture was heated under ref lux conditions for 4 hours. The reaction was allowed to cool – excess dioxanewas removed and the residue was diluted with EtOAc and filtered through celite. The organic solution was concentrated. The crude material was purified by column chromatography (24g silica) with a gradient 0 – 50% EtOAc in hexanes to give 5-fluoro-2-methyl-3-(4,4,5,5- tetramethyl-1 ,3,2-dioxaborolan-2-yl)aniline (0.761 g, 2.79 mmol, 78.5%).[00405] 1H NMR (DMSO-d6): O 6.91 (dd, J= 2.7 and 9.0 Hz, 1H), 6.50 (dd, J= 2.6 and10.0 Hz, 1H), 3.88 (bs, 2H), 2.34 (5, 3H), 1.36 (5, 12H).

The synthetic route of 502496-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; CANCER RESEARCH TECHNOLOGY LIMITED; GOLDBERG, Kristin; HAMILTON, Niall; JONES, Stuart; JORDAN, Allan; LYONS, Amanda; NEWTON, Rebecca; OGILVIE, Donald; WASZKOWYCZ, Bohdan; WO2015/79251; (2015); A1;,
Bromide – Wikipedia,
bromide – Wiktionary