Tag: M.W=200-300

These common heterocyclic compound, 876-53-9, name is 1,3-Dibromoadamantane, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C10H14Br2

A compound of 1,3-dibromo-adamantane (3 g, 10 mmol) was dissolved in 30 mL of toluene, and then 250 mgof AIBN (1.5 mmol), 7 g of tri-n-butyl tin (24 mmol), 3 g of 2-ethyl methacrylate were added in order. The reaction wasrefluxed at 110C under nitrogen for 3 hours. The reaction solution was cooled to room temperature, and was poured into 30 mL of 0.2 M aqueous ammonia. After being stirred fully, the organic layer was separated, the aqueous layer wasextracted with ethyl acetate (20 mL34). The organic layers were combined, and washed with 30 mL of water and 30mL of saturated sodium chloride solution, dried with anhydrous sodium sulfate. The solvent was evaporated underreduced pressure to give a crude product as a colorless oil, which was separated by silica column chromatography(petroleum ether : ethyl acetate = 10:1) to obtain NM-012a as a colorless oil (1.6 g, 43.1%). ESI-MS: m/z 337.4 ([M+H]+). 1H-NMR (DMSO-d6, ppm): 0.97 (s, 2 H), 1.02-1.08 (m, 8 H), 1.15-1.20 (m, 7 H), 1.22-1.40 (m, 7 H), 1.50 (s, 2 H),1.57-1.65 (m, 2 H), 1.93 (s, 2 H), 2.39-2.47 (m, 2 H), 3.98-4.11 (m, 4 H).

The synthetic route of 1,3-Dibromoadamantane has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Guangzhou Magpie Pharmaceuticals Co., Ltd.; WANG, Yuqiang; LIU, Zheng; YU, Pei; SUN, Yewei; ZHANG, Zaijun; ZHANG, Gaoxiao; SHAN, Luchen; YI, Peng; LARRICK, James; (27 pag.)EP3150574; (2017); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Electric Literature of 29086-41-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 29086-41-7, name is 1,1-Bis(bromomethyl)cyclopropane belongs to bromides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Ethyl 2-(5-chioro-6-(2,2,2-trifluoroethoxy)-4′-(trifluoromethyl)biphenyl-3- yl)acetate (0.6 g, 1.36 mmol) was dissolved in anhydrous DMF (30mL), NaH (60% wt. in paraffin oil, 0.136 g, 3,4 mmol) was added at 0C. The reaction mixture was stirred for 30 rmn at room temperature and 1 , 1 -bis(bromomethyl)cyclopropane (0.482 g, 1 .4 mmol, for preparation see J. Org. Chem 1993, 58, 4122-26) was added drop wise at 0 C. The reaction mixture was stirred an additional Ih at 0 C and saturated NH4CI solution (lOmL) was added. The reaction mixture was extracted with EtOAc (3x20mL) and the combined organic phases were washed with water (3x20mL) and brine (20mL), and dried over MgS04. The volatiles were removed under reduced pressure and the residue was purified by flash column chromatograplivto yield compound ethyl 5-(5-chloro-6-(2,2,2- trifluoroethoxy)-4′-(trifluoromethyl)biphenyl-3-yl)- spiro[2,3]hexane-5-carboxylate (150 mg) as a low melting solid.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1,1-Bis(bromomethyl)cyclopropane, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ENVIVO PHARMACEUTICALS, INC.; KOENIG, Gerhard; BLAIN, Jean-francois; WO2013/106328; (2013); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Reference of 1435-53-6, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1435-53-6, name is 2,4-Dibromo-1-fluorobenzene, This compound has unique chemical properties. The synthetic route is as follows.

a. o . g . mmo , – romo- – uorobezene, 8.20 g (39.4 mmol) 1- phenylbenzimidazol-2-amine and 25.1 g (11.8 mmol) potassium phosphate tribasic in 200 ml DMA are stirred at 110 C for 4 h under nitrogen. The reaction mixture is poured on water. The water phase is extracted with dichloromethane. The organic phase is washed with 3 times water and dried with magnesium sulfate. The solvent is distilled of. The product is decocted in diethyl ether. (0820) Yield 5.30 g (36 %). 1H NMR (400 MHz, CDCl3): ^ = 8.01 (d, 1H), 7.81-7.86 (m, 3H), 7.63-7.7.67 (m, 3H), 7.57-5.59 (m, 1H), 7.46-7.51 (m, 2H), 7.36-7.44 (m, 2H).

The chemical industry reduces the impact on the environment during synthesis 2,4-Dibromo-1-fluorobenzene. I believe this compound will play a more active role in future production and life.

Reference:
Patent; IDEMITSU KOSAN CO., LTD.; SCHAeFER, Thomas; KAWAMURA, Masahiro; NAGASHIMA, Hideaki; (320 pag.)WO2017/56053; (2017); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Application of 58971-11-2, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 58971-11-2 as follows.

To a solution of 3-bromophenethylamine (10.0 g, 50 mmol) in DCM (100 ml) containing TEA (8.36 g, 60 mmol, 1.2 eq.) cooled to 0 0C is added 2-chlorobenzoylchloride (8.75 g, 50 mmol, 1.0 eq.) portiowise. The resulting mixture is stirred at rt for 1 hr. Water (100 ml) is added to quench the reaction. The organic layer is collected, washed with water and brine, dried over sodium sulfate, and concentrated to give the title compound.

According to the analysis of related databases, 58971-11-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; NEUROGEN CORPORATION; WO2007/106349; (2007); A2;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 699-03-6, A common heterocyclic compound, 699-03-6, name is 1-(4-Bromophenyl)-N-methylmethanamine, molecular formula is C8H10BrN, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To an oven dried 10 mL screw cap vial equipped with a stir-bar and charged with amine 1a (0.5 mmol) was added aldehyde 2a (84 mg, 1.5 equiv) and toluene (0.2 mL) and the mixture was stirred for 5 min at room temperature. Thereafter, heteroarene 3a (88 mg, 1.2 equiv) and CuCl (20 mol%) were added and the vial was sealed with a Teflon cap. The reaction mixture was irradiated for 50 min at a preselected temperature of 140 oC, with a maximum irradiation power of 200 W. After completion of the reaction, Oxadiazole 3a (0.5 mmol), Pd(OAc)2 (10 mol%), PPh3 (20 mol%), Cs2CO3 (2 equiv) and toluene (2 mL) was added and the reaction mixture was again irradiated under microwave for 40 min at 120 oC, 200 W. Thereafter, the resulting mixture was diluted with ethyl acetate (50 mL) and washed with water (50 mL) and brine (50 mL). The organic phase was dried over anhydrous MgSO4, filtered and concentrated under reduced pressure. The crude sample was purified by silica gel column chromatography (15-25% ethyl acetate in heptane) to obtain 7a (174 mg, 69% yield).White solid, m.p. 146-148 oC, yield 69 %, 1H NMR (300 MHz, CDCl3): 8.19-8.03 (m, 6H), 7.61-7.44 (m, 8H), 3.82-3.71 (m,2H), 3.56 (d, J = 13.95 Hz, 1H), 2.38-2.26 (m, 4H), 2.20-2.08 (m, 1H), 1.89-1.78 (m, 1H), 1.73-1.62 (m, 2H), 1.44-1.16 (m,4H), 1.10-0.84 (m, 2H). 13C NMR (75 MHz, CDCl3): 164.7, 164.6, 164.4, 143.3, 131.7 (2), 129.3, 129.1, 129.0, 127.0, 126.9,124.0, 123.9, 122.7, 64.1, 58.6, 37.6, 37.5, 30.6, 30.1, 26.4, 25.8, 25.7. HRMS (EI): calcd for C31H31N5O2: 505.2478, found:505.2451.

The synthetic route of 699-03-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Vachhani, Dipak D.; Sharma, Abhishek; Van Der Eycken, Erik; Angewandte Chemie – International Edition; vol. 52; 9; (2013); p. 2547 – 2550; Angew. Chem.; vol. 125; 9; (2013); p. 2607 – 2610,4;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 1435-52-5, name is 1,4-Dibromo-2-fluorobenzene, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1435-52-5, SDS of cas: 1435-52-5

General procedure: 6.11 1,4-Di(2-thienyl)-2-fluorobenzene (7k): Starting with 6 (100 mg, 0.39 mmol), Cs2CO3 (190 mg, 0.50 mmol), Pd(PPh3)4 (3 molpercent), 2-thienylboronic acid (49 mg, 0.39 mmol) and 1,4-dioxane (4 mL), 7k was isolated as a colorless solid (51 mg, 50percent). Mp 94-96 ¡ãC. 1H NMR (300 MHz, CDCl3): delta = 7.00-7.06 (m, 2H, ArH), 7.22-7.34 (m, 5H, ArH), 7.41-7.43 (m, 1H, ArH), 7.52-7.57 (m, 1H, ArH). 13C NMR (75.46 MHz, CDCl3): delta = 113.4 (d, J = 24.5 Hz, CH), 121.1 (d, J = 13.5 Hz, C), 121.8 (d, J = 3.1 Hz, CH), 123.8 (CH), 125.6 (CH), 125.8 (d, J = 4.5 Hz, CH), 126.3 (d, J = 7.1 Hz, CH), 127.8 (CH), 128.3 (CH), 129.0 (d, J = 4.2 Hz, CH), 134.9 (d, J = 9.4 Hz, C), 136.9 (d, J = 3.87 Hz, C), 142.6 (d, J = 2.9 Hz, C), 159.2 (d, JCF = 250.2 Hz, CF). 19F NMR (282.4 MHz, CDCl3): delta = -107.4 (CF). IR (ATR, cm-1): , 3074 (w), 2961 (w), 2854 (w), 1799 (w), 1606 (w), 1553 (w), 1483 (m), 1419 (m), 1354 (w), 1289 (w), 1259 (m), 1207 (w), 1135 (w), 1058 (m), 1015 (m), 945 (w), 866 (m), 805 (s), 692 (s), 630 (m), 579 (w), 550 (m), 528 (m). GC-MS (EI, 70 eV): m/z (percent) = 260 (100) [M+], 215 (12). HRMS (EI) calcd. for C14H9FS2 [M]+: 260.01242; found 260.01269.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Sharif, Muhammad; Maalik, Aneela; Reimann, Sebastian; Feist, Holger; Iqbal, Jamshed; Patonay, Tama?s; Villinger, Alexander; Langer, Peter; Journal of Fluorine Chemistry; vol. 146; (2013); p. 19 – 36;,
Bromide – Wikipedia,
bromide – Wiktionary

Reference of 69321-60-4, A common heterocyclic compound, 69321-60-4, name is 2,6-Dibromotoluene, molecular formula is C7H6Br2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A 100-mL single-neck round-bottomed flask equipped with a magnetic stirrer and nitrogen inlet was charged with 117a (400 mg, 1.27 mmol), 2,6-dibromotoluene (633 mg, 2.53 mmol), cesium carbonate (828 mg, 2.54 mmol), N-methylethylenediamine (112 mg, 1.27 mmol) and 1 ,4-dioxane (20 mL). After bubbling nitrogen through the resulting suspension for 30 min, copper iodide (121 mg, 2.54 mmol) was added. A reflux condenser was attached to the flask, and the reaction mixture was heated at 100 C for 16 h. After this time, the mixture was cooled to room temperature and filtered. The filtrate was concentrated under reduced pressure, and the resulting residue was purified by flash column to afford 117b in 41% yield (251 mg) as a yellow oil: ]H NMR (500 MHz, CDC13) delta 7.71 (d, 1H, / = 8.0 Hz), 7.68 (d, 1H, / = 8.0 Hz), 7.63 (d, 1H, / = 8.0 Hz), 7.47 (t, 1H, / = 8.0 Hz), 7.32-7.28 (m, 2H), 7.21 (t, 1H, / = 8.0 Hz), 6.13 (s, 2H), 4.15 (m, 1H), 3.93 (m, 1H), 3.69 (m, 2H), 3.29 (m, 2H), 2.45 (s, 3H), 0.95 (t, 2H, / = 8.0 Hz), -0.07 (s, 9H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; GILEAD CONNECTICUT, INC.; GENENTECH, INC.; BARBOSA, Antonio, J., M.; BLOMGREN, Peter, A.; CURRIE, Kevin, S.; KRISHNAMOORTHY, Ravi; KROPF, Jeffrey, E.; LEE, Seung H.; MITCHELL, Scott A.; ORTWINE, Daniel; SCHMITT, Aaron, C.; WANG, Xiaojing; XU, Jianjun; YOUNG, Wendy; ZHANG, Honglu; ZHAO, Zhongdong; ZHICHKIN, Pavel E.; WO2011/140488; (2011); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 6274-57-3, name is 1-(4-Bromophenyl)-N,N-dimethylmethanamine, This compound has unique chemical properties. The synthetic route is as follows., Application In Synthesis of 1-(4-Bromophenyl)-N,N-dimethylmethanamine

2.33.a tert.butyl 4-(4-dimethylaminomethyl-phenyl)-4-hydroxy-piperidine-1-carboxylate 236 mL (0.38 mol, 1.6M in hexane) n-BuLi is added dropwise over 35 min at -65 C. to a solution of 81 g (0.38 mol) of 4-bromodimethylbenzylamine in 450 mL THF. 75 g (0.38 mol) of tert.butyl 4-oxo-piperidine-1-carboxylate in 150 mL THF are added dropwise over 60 min, so that the temperature does not exceed -60 C. The reaction solution is stirred for 2 h at -65 C. and for a further 17 h at ambient temperature. The reaction mixture is combined with 300 mL ether, cooled to 5 C. and the precipitate formed is suction filtered. The precipitate is combined with 200 mL water and 700 mL ether and stirred for 10 min. The organic phase is dried over magnesium sulphate and the solvent eliminated using the rotary evaporator. The product obtained is dried in vacuo. Yield: 45 g (35.7% of theory).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 6274-57-3.

Reference:
Patent; Boehringer Ingelheim International GmbH; US2004/242572; (2004); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 16518-62-0, name is 3-Bromo-N,N-dimethylaniline belongs to bromides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. name: 3-Bromo-N,N-dimethylaniline

TO A MIXTURE OF] [PALLADIUM (II)] acetate (3 mg, 5 [MOLpercent),] [2-DICYCLOHEXYLPHOSPHINO-2APOS;- (N,] N- dimethylamino) biphenyl (10 mg, 5 molpercent) and lithium bis (trimethylsilyl) amide (0.55 mL, 0.55 mmol, 1.1 equiv, 1.0 M solution in tetrahydrofuran) in toluene (0.5 mL) under nitrogen at-10 [¡ãC,] was added a solution of [3- [5- (3, 4-DICHLORO-] [PHENYL)-1-(2, 4-DICHLORO-PHENYL)-1H-PYRAZOL-3-YL]-PROPIONIC] acid tert-butyl ester (243 mg, 0.50 mmol, 1.0 equiv) in toluene (1.0 mL). This mixture was stirred at [- 10 ¡ãC] for 10 min, then (3-bromo-phenyl)-dimethyl-amine (42 mg, 0.21 mmol, 0.45 equiv) in toluene (0.5 mL) was added. The resulting solution was allowed to warm to room temperature then was heated to 80 [¡ãC] for 3 h. The reaction mixture was cooled to room temperature, and the reaction was quenched with satd aq ammonium chloride (1.0 mL). Water (10.0 mL) was added, and the resulting mixture was extracted with diethyl ether (2 x 10 mL). The combined extracts were washed with brine (10 mL), dried [(NA2SO4),] and concentrated under reduced pressure. The crude material was purified by reversed-phase HPLC to afford the desired aryl acetic acid ester (20 mg, 16percent). MS [(ESI)] : mass [CALCULATED FOR C30H29CI4N302,] 603.10 ; [M/Z] found, 604.1 [M+H] [+.]

The synthetic route of 16518-62-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; JANSSEN PHARMACEUTICA, N.V.; WO2004/7463; (2004); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Application of 418762-26-2,Some common heterocyclic compound, 418762-26-2, name is 4-Bromo-2-fluoro-5-methylaniline, molecular formula is C7H7BrFN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 4-bromo-2-fluoro-5-methylaniline (1.10 g, 5.39 mmol), ethyl 4-(3-methylbutanoyl)benzoate (1.26 g, 5.39 mmol) and Et3N (2.25 ml, 16.2 mmol) in DCM (100 ml) was added TiCl4 (2.7 ml, 2.7 mmol) dropwise and the reaction was monitored by TLC. The mixture was kept stirring at room temperature for 16 h, then 5N NaOH was added to adjust pH = 14, extracted with DCM and the organic layer was washed with brine, dried and concentrated. The resulting residue was used for the next step reaction directly.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Bromo-2-fluoro-5-methylaniline, its application will become more common.

Reference:
Article; Song, Fengbin; Xu, Guozhang; Gaul, Michael D.; Zhao, Baoping; Lu, Tianbao; Zhang, Rui; DesJarlais, Renee L.; DiLoreto, Karen; Huebert, Norman; Shook, Brian; Rentzeperis, Dennis; Santulli, Rosie; Eckardt, Annette; Demarest, Keith; Bioorganic and Medicinal Chemistry Letters; vol. 29; 15; (2019); p. 1974 – 1980;,
Bromide – Wikipedia,
bromide – Wiktionary