Tag: M.W=200-300

Some common heterocyclic compound, 5279-32-3, name is 5,6-Dibromobenzo[d][1,3]dioxole, molecular formula is C7H4Br2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C7H4Br2O2

Under nitrogen atmosphere, 5,6-Dibromo-1,3-benzodioxole (13a, 1.58 g, 5.64 mmol), zinc(II)cyanide (670 mg, 5.71 mmol) and [1,1?-bis(diphenylphosphino)ferrocene]dichloropalladium(II) (208 mg, 284 mumol) were dissolved in anhydrous dimethylacetamide (12 mL) andstirred for 3 h at 150 C. Subsequently, the mixture was diluted with ethyl acetate (50 mL),washed with water (2 × 50 mL), the organic layer dried over magnesium sulfate and the solventremoved in vacuo. The crude product was purified by column chromatography using silica anddichloromethane as eluent (Rf = 0.50) to obtain a colourless solid (829 mg, 4.82 mmol, 85%).1H NMR (500MHz, CDCl3, 300 K): delta = 7.14 (s, 2H), 6.21 (s, 2H) ppm;13C NMR (125 MHz, CDCl3, 300 K): delta = 151.7 (2C), 115.5 (2C), 112.8 (2C), 111.0 (2C), 104.0 ppm;MS (EI, 70 eV): m/z (%) = 172 (100) [M]+;HR-MS (EI, 70 eV): m/z = calcd. for C9H4N2O2 [M]+ 172.0267, found 172.0273.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5279-32-3, its application will become more common.

Reference:
Article; Hamer, Sebastian; Roehricht, Fynn; Jakoby, Marius; Howard, Ian A.; Zhang, Xianghui; Naether, Christian; Herges, Rainer; Beilstein Journal of Organic Chemistry; vol. 15; (2019); p. 1331 – 1338;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 149910-98-5, name is 7-Bromoisochroman, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 149910-98-5, Formula: C9H9BrO

Into a 500-mL round-bottom flask, was placed 7-bromoisochroman (8.48 g, 40.0 mmol, 1.0 equiv) in dioxane (200 mL)/water (20 mL). Pd(dppf)Cl2 (5.8 g, 8.0 mmol, 0.2 equiv) and CS2CO3 (26.1 g, 80.0 mmol, 2.0 equiv) (BPin)2 (2.5 eq) were added to the solution. The resulting solution was stirred for 16 hr at 90 degrees C, after which it was concentrated and purified with SiCk-gel column chromatography. This resulted in 4.6 g (44.2%) of 2-(isochroman-6-yl)-4,4,5,5-tetramethyl-1,3,2-dioxaborolane as a white solid.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 7-Bromoisochroman, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; NOVARTIS INFLAMMASOME RESEARCH, INC.; GLICK, Gary; ROUSH, William; VENKATRAMAN, Shankar; SHEN, Dong-Ming; GHOSH, Shomir; SEIDEL, Hans Martin; FRANCHI, Luigi; WINKLER, David Guenther; OPIPARI, Anthony William Jr.; KATZ, Jason; (468 pag.)WO2020/10140; (2020); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Related Products of 67567-26-4,Some common heterocyclic compound, 67567-26-4, name is 4-Bromo-2,6-difluoroaniline, molecular formula is C6H4BrF2N, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 1-tert-butoxycarbonyl-4-methyl-piperidine-4-carboxylic acid (240 mg, 0.99 mmol, 1.0 eq.) in CH2Cl2 (8.0 mL) was added pyridine (320 mg, 0.32 mL, 3.9 mmol, 4.0 eq.), (COCl)2 (130 mg, 0.088 mL, 0.99 mmol, 1.0 eq.) followed by 2 drops of DMF. After 1 h at room temperature, 4-bromo-2,6-difluoro-aniline (210 mg, 0.99 mmol, 1.0 eq.) was added and the mixture was stirred at room temperature overnight, after which CH2Cl2 was added and washed with water and brine. The organic layers were dried, evaporated and purified over silica gel with ethyl acetate in hexanes (5 to 50% gradient) to give tert-butyl 4-[(4-bromo-2,6-difluoro- phenyl)carbamoyl]-4-methyl-piperidine-1-carboxylate (350 mg, 82%). 1H NMR (CDCl3) d: 7.43 (s, 1H), 7.11 (d, J= 6.6 Hz, 2H), 3.65 – 3.81 (m, 2H), 3.14 – 3.22 (m, 2H), 2.09 (d, J= 13.9 Hz, 2H), 1.46 – 1.52 (m, 2H), 1.45 (s, 9H), 1.32 (s, 3H).

The synthetic route of 67567-26-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; PTC THERAPEUTICS, INC.; ZHANG, Nanjing; BABU, Suresh; BARRAZA, Scott J.; BHATTACHARYYA, Anuradha; CHEN, Guangming; KARP, Gary Mitchell; KASSICK, Andrew J.; MAZZOTTI, Anthony R.; MOON, Young-Choon; NARASIMHAN, Jana; SYDORENKO, Nadiya; TURPOFF, Anthony; WOLL, Matthew, G.; YAN, Wuming; (0 pag.)WO2020/5877; (2020); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Application of 4549-33-1, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4549-33-1, name is 1,9-Dibromononane, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: To a solution of SA (15 mg, 0.06 mmol) in DMF (1 mL, freshly distilled from CaH2), was added K2CO3 (25 mg, 0.18 mmol), followed by the addition of dibromoalkane (0.24 mmol). The obtained mixture was then stirred under N2 atmosphere at 50 C for 12 h. Afterwards, the reaction mixture was cooled to room temperature and quenched by brine (5 mL). The mixture was then extracted with DCM(5 mL x 3), washed successively with brine (10 mL x 3) and water (10 mL x 3), dried over Na2SO4,filtered, and concentrated in vacuo. The residue was purified by silica gel CC (EtOAc/PE ranged from 5:95 to 10:90 depending on the TLC analysis) to yield 15-20.

The chemical industry reduces the impact on the environment during synthesis 1,9-Dibromononane. I believe this compound will play a more active role in future production and life.

Reference:
Article; Zhang, Jun; Ling, Wei; Yang, Zhiqiang; Liang, Yan; Zhang, Linyan; Guo, Can; Wang, Kailing; Zhong, Balian; Xu, Shihai; Xu, Ying; Marine Drugs; vol. 17; 2; (2019);,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 21865-50-9, name is 6-Bromo-2,3,4,9-tetrahydro-1H-carbazole, A new synthetic method of this compound is introduced below., Safety of 6-Bromo-2,3,4,9-tetrahydro-1H-carbazole

To a suspension of 39 (0.75 g, 3.0 mmol) in acetic acid (3 ml) is added acetyl chloride (0.21 ml, 3.0 mmol). The mixture is heated to reflux, resulting in a clear solution. After 2 hours, the reaction solution is cooled to room temperature (rt). A solid is precipitated out. The solid 48 is filtered and washed with hexanes (2 x), 0.24 g, 27%

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; PTC THERAPEUTICS, INC.; WO2006/58088; (2006); A2;,
Bromide – Wikipedia,
bromide – Wiktionary

These common heterocyclic compound, 67567-26-4, name is 4-Bromo-2,6-difluoroaniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of 4-Bromo-2,6-difluoroaniline

Example 16B V,jV-dibenzyl-4-bromo-2,6-difluorobenzenamineA mixture of the product of Example 16A (1.1 g, 5.3 mmol), benzyl bromide (949 mg, 0.66 ml) and potassium bicarbonate (1.46 mg, 10.6 mmol) in NN-dimethylformamide (3 itiL) was stirred at ambient temperature until TLC indicated no starting material remained. Ethyl acetate was added, and the mixture was washed with water and brine and dried over anhydrous sodium sulfate. After filtration and concentration, the residue was purified by flash chromatography on silica gel (200-300 mesh) eluting with 10/1 petroleumether/dichoromethane to give the title compound.

The synthetic route of 4-Bromo-2,6-difluoroaniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ABBOTT LABORATORIES; ABBOTT LABORATORIES TRADING (SHANGHAI) COMPANY, LTD.; VASUDEVAN, Anil; PENNING, Thomas Dale; CHEN, Huanming; LIANG, Bo; WANG, Shaohui; WU, Fengchun; SHEN, Yan; LIU, Cuihua; ZOU, Zhenguang; WO2012/97684; (2012); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Reference of 58971-11-2, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 58971-11-2, name is 3-Bromophenethylamine, This compound has unique chemical properties. The synthetic route is as follows.

4i was then obtained by following the general procedure. A solution of compound 3 (140 mg, 0.7 mmol) in n-BuOH (6 mL) was treated with DIEA (98.6 mg, 0.77 mmol) and 3-bromophenethylamine (154 mg, 0.77 mmol). Compound 4i was purified from this crude material by column chromatography (silicagel, n-hexane/EtOAc=3:1) (128.2 mg, 50.7%). 1H-NMR (400 MHz, CDCl3) delta 7.71-762 (m, 2H), 7.49 (d, J=8.4 Hz, 1H), 7.38-7.30 (m, 2H), 7.14-7.08 (m, 1H), 5.99 (s, 1H, -NH), 3.86 (dd, J=12.4, 6.8 Hz, 2H, -CH2-), 2.94 (t, J=7.2 Hz, 2H, -CH2-). 13C-NMR (100 MHz, CDCl3) delta 159.8, 156.7, 149.8, 147.2, 140.9, 139.9, 132.6, 130.9, 129.3, 128.9, 126.5, 125.3, 121.8, 119.6, 112.2, 41.3, 33.7. LC-MS (ESI) m/z: 362.0 ([M+H]+);

The chemical industry reduces the impact on the environment during synthesis 3-Bromophenethylamine. I believe this compound will play a more active role in future production and life.

Reference:
Patent; The Board of Regents of the University of Oklahoma; Wang, Weidong; Lee, Jae Wook; (35 pag.)US2019/47988; (2019); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

These common heterocyclic compound, 51554-93-9, name is 1-Bromo-4-octylbenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of 1-Bromo-4-octylbenzene

Synthesis Example 2 Synthesis of Exemplified Compound 4 In a nitrogen atmosphere, 10 ml (16 mmol) of a 1.6 M n-butyllithium/hexane solution is added to a 100-ml three-necked flask cooled to -80 C. This solution is cooled to -80 C., and then 10 ml of THF maintained at -60 C. is added dropwise thereto from a dropping funnel. Subsequently, 3.1 g (16 mmol) of 1-bromo-4-n-octylbenzene maintained at -60 C. is added dropwise to the mixture from a dropping funnel. This mixture is stirred for one hour at -40 C., and then a solution of 2.3 g (22 mmol) of trimethyl borate in THF (10 ml) maintained at -40 C. is added thereto from a dropping funnel. Thereafter, the mixture is slowly heated to 10 C. over 2 hours, and then 50 ml of a 10% aqueous solution of HCl at 0 C. is added thereto. The mixture is extracted with 100 ml of toluene. This extract is washed three times with 100 ml of purified water, and then is dried with sodium sulfate. Toluene is distilled off under reduced pressure, and 3.3 g of a residue is obtained. This residue is further washed with a mixed liquid of 100 ml of purified water and 100 ml of hexane, and thus 2.0 g of the compound V-a, which is 4-n-octylphenylboronic acid, is obtained. It is confirmed by 1H-NMR and IR that the compound is consistent with the intended product.

The synthetic route of 1-Bromo-4-octylbenzene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; FUJI XEROX CO., LTD.; US2010/276672; (2010); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Reference of 6698-13-1, A common heterocyclic compound, 6698-13-1, name is 4-Bromo-1,3-benzodioxole, molecular formula is C7H5BrO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Tert-butyl piperazine-l-carboxylate (1.11 g, 5.97 mmol) was added to a solution of 4- bromobenzo[d][l,3]dioxole (1 g, 4.97 mmol ) in Toluene (15.0 ml). The resulting suspension was degassed using a stream of argon. Cesium carbonate (2.27 g, 558 mu, 6.96 mmol), racemic- 2,2 -bis(diphenylphosphino)-l, -binaphtyl (232 mg, 373 muiotaetaomicron, Eq: 0.075) and Palladium (II) Acetate (55.8 mg, 249 muiotaetaomicron,) were added to this mixture. The reaction was then heated at 100 C over night. The reaction was cooled to rt, 40ml of water was added and the mixture was extracted with Ethyl Acetate ( 2x 80ml). The organic layers were dried over MgS04 and concentrated under vacuum. The crude material was purified by flash chromatography (silica gel, 50g, 0% to 50% EtOAc in heptane). to yield tert-butyl 4-(benzo[d][l,3]dioxol-4-yl)piperazine-l- carboxylate as a white solid ( 1.15 g, 75%). MS (ISP) m/z = 307.4 [(M+H)+].

The synthetic route of 6698-13-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; RODRIGUEZ SARMIENTO, Rosa Maria; WICHMANN, Juergen; WO2012/110470; (2012); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

445-02-3, name is 4-Bromo-2-(trifluoromethyl)aniline, belongs to bromides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Safety of 4-Bromo-2-(trifluoromethyl)aniline

To a mixture of 2-amino-5-bromobenzotrifluoride (1 .0 g, 4.17 mmol) in DCM (10 mL) at 0-5C was added NEt3 (1 .16 mL, 8.33 mmol), then methanesulfonyl chloride (0.389 mL, 5 mmol) dropwise. The reaction mixture was stirred at rt for 4 days. After 2 days, more NEt3 was added (1 .16 mL, 8.33 mmol). As there was no evolution after 3 days, more NEt3 (0.580 mL, 4.17 mmol) and methanesulfonyl chloride (0.324 mL, 4.17 mmol) were added. The reaction was not completed, so the reaction mixture was then heated in a microwave oven at 1 10C for 20 min. There was no evolution, so the reaction was stopped. The reaction mixture was diluted with water and DCM. Layers were separated. The organic layer was washed with water, dried over MgS04 and evaporated. Purification by Flash chromatography using CombiFlash Companion ISCO system (Redisep silica 40g column, eluting with Cyclohexane/EtOAc 100:0 to 70:30) did not give the pure compound. Purification by prep HPLC using Gilson system (SunFire C18 column, eluting with H20 + 0.1 % TFA / CH3CN 20% to 85%) gave the title compound (404 mg, 31 % yield) as a white solid. 1 H-NMR (400 MHz, DMSO-d6, 298 K): ? ppm 3.12 (s, 3H) 7.55 (d, 1 H) 7.91 (d, 1 H) 7.92 (s, 1 H) 9.56 (s, 1 H). MS(10): 316.3-318.2 [M-1 ]

The synthetic route of 445-02-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NOVARTIS AG; FURET, Pascal; HEBACH, Christina; HOeGENAUER, Klemens; HOLLINGWORTH, Gregory; LEWIS, Ian; SMITH, Alexander, Baxter; SOLDERMANN, Nicolas; STAUFFER, Frederic; WOLF, Romain; ZECRI, Frederic; WO2013/57711; (2013); A1;,
Bromide – Wikipedia,
bromide – Wiktionary