Tag: M.W=300-400

Electric Literature of 6320-40-7, These common heterocyclic compound, 6320-40-7, name is 1,3,5-Tribromo-2-methylbenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Synthesizing of Intermediates A and B 3.3g (10 mmol) of 2,4,6-tribromotoluene was dissolved in 30 mL of diethylether. The resulting solution was cooled to -78 C and 4.4mL (11 mmol) of normalbutylithium (2.5M in Hexane) was slowly added thereto. The resulting solution was stirred at -78C for one hour and 1.48g (11 mmol) of cooper chloride (II) was added thereto at -78C. The reactant product was stirred for 5 hours and cleaned using distilled water and ethylacetate at room temperature. The cleaned ethylacetate layer was dried over MgSO4 and dried under a reduced pressure, thereby producing a crude-product. The pre-product was refined through a column chromatography and the refined result was recrylstallized in dichloromethane and hexane, thereby producing white solid intermediates A and B. Amounts of A and B were 622 mg (yield 25%) and 746 mg (yield: 30%), respectively. Intermediate A : 1H NMR (CDCl3, 400MHz) delta (ppm) 7.74 (d, 4H), 7.18 (d, 4H), 2.06 (s, 6H); 13C NMR (CDCl3, 100MHz) delta (ppm) 142.8, 134.9, 134.5, 131.1, 126.4, 119.4, 19.9 Intermediate B : 1H NMR (CDCl3, 400MHz) delta (ppm) 7.60 (s, 4H), 2.61 (s, 6H); 13C NMR (CDCl3, 100MHz) delta (ppm) 138.3, 137.2, 129,9, 125.8, 23.5

The synthetic route of 6320-40-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Samsung SDI Co., Ltd.; EP1752442; (2007); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

These common heterocyclic compound, 10016-52-1, name is 2,8-Dibromodibenzo[b,d]furan, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application In Synthesis of 2,8-Dibromodibenzo[b,d]furan

To a 250 ml three-mouth bottle adding 5.04g (0.022 muM) precursor 1 (through the implementation of example one preparation) and 3.26g (0.01 muM) 2, 8 – dibromodiphenyl benzofuran, the mixture thus obtained is VI, VI is added to the mixture in the 40g toluene. Opening stirring, system for the picture and the turbid, N2Replacement system 10min. In the system by adding 2.8g (0.025 muM) tert-butanolate, 0.18g (2 × 10-4Mol) Pd2(Dba)3And 0.12g (4 × 10-4Mol) tri-butyl phosphine four fluoroborates, 80 C reaction 8 hours. The said technological, cooling to 20 – 25 C, the reaction liquid filtration, filtrate directly filtering of the silica gel column, eluting with toluene, the solvent under reduced pressure, to be brownish red color oil of 6.5g. In the above-mentioned crude product in adding toluene and hexane recrystallization (mass ratio of 2:1), vacuum drying oven drying 3h, gain the light yellow powder 2.5g, yield: 40.2%.

The synthetic route of 2,8-Dibromodibenzo[b,d]furan has been constantly updated, and we look forward to future research findings.

Reference:
Patent; CECEP Wanrun Co., Ltd.; Ren Huicai; Pang Maoyin; Yang Fushan; Tian Shaozhen; Shi Rujin; Hu Baohua; (14 pag.)CN105153085; (2017); B;,
Bromide – Wikipedia,
bromide – Wiktionary

Some common heterocyclic compound, 19190-91-1, name is 5,6-Dibromo-1,2-dihydroacenaphthylene, molecular formula is C12H8Br2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C12H8Br2

General procedure: Dibromoarene 1 (0.5 mmol), alkyne 2 (0.6 mmol), Pd(OAc)2 (5 mol%, 5.6 mg ),Xantphos (5.5 mol%,16 mg), K2CO3 (1.5 mmol, 207 mg) were added into a Schlenkflask. The flask was evacuated and backfilled with nitrogen (3 cycles). Dry DMF (5mL) was added by syringe. The mixture was heated to 120 C and stirred until thereaction finished (TLC analysis). After cooling to room temperature, the mixture wasextracted three times with ethyl acetate. The organic layers were combined and driedover Na2SO4. After filtration, the solvents were evaporated. The crude product wasfurther purified by silica gel chromatography, using petroleum ether and ethyl acetateas eluents to provide the pure product

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 19190-91-1, its application will become more common.

Reference:
Article; An, Wenbo; Li, Gaoqiang; Ma, Jun; Tian, Youping; Xu, Feng; Synlett; vol. 25; 11; (2014); p. 1585 – 1590;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 827-08-7, name is 1,2-Dibromo-3,4,5,6-tetrafluorobenzene, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 827-08-7, Computed Properties of C6Br2F4

By the following method,A compound represented by the formula (1m) (1,2-bis (2-methyl-5-phenyl-3-thienyl) tetrafluorobenzene) was synthesized.3-Bromo-2-methyl-5-phenylthiophene in a three-necked flask under an argon atmosphere [Literature Description: M.M. Irie, T .; Lifka, S .; Kobatake, N .; Kato, J .; Am. Chem. Soc. , 122, 4871-4876 (2000)] 520 mg (2.1 mmol) was added and dissolved in 15 mL of anhydrous tetrahydrofuran (THF).. After cooling to -78 C., 1.3 mL (2.2 mmol) of 1.6 M n-butyllithium hexane solution was slowly added dropwise. After stirring for 2 hours,Tributyl borate 1.0 mL (3.7 mmol) was slowly added dropwise and stirred for 2 hours.Then return to room temperature,Quenched with water.The mixture was acidified with dilute hydrochloric acid and extracted with diethyl ether.Add sodium hydroxide aqueous solution to the organic layer,After basifying, extraction with diethyl ether was performed again.Add concentrated hydrochloric acid to the aqueous phase,The resulting white precipitate was obtained by filtration. It was dissolved in THF, 120 mg (0.40 mmol) of 1,2-dibromotetrafluorobenzene,2 mL of 20 wt% aqueous sodium carbonate solution and 50 mg (0.043 mmol) of Pd (PPh3) 4 were added and refluxed for 8 hours. The mixture was neutralized with dilute hydrochloric acid, extracted with diethyl ether, salted out, and dried over magnesium sulfate. The solvent was distilled off and the residue was purified by silica gel column chromatography using hexane as a developing solvent.Yield 81 mg, Yield 83%

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Osaka City University; Kobatake, Seiya; Kitagawa, Daichi; (28 pag.)JP2019/151596; (2019); A;,
Bromide – Wikipedia,
bromide – Wiktionary

43204-63-3, name is Bis(2-Bromoethyl)amine hydrobromide, belongs to bromides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Recommanded Product: 43204-63-3

PREPARATION EXAMPLE 4 (2S)-3-{4-[2-(5-methyl-2-phenyl-1, 3-oxazol-4-yl)-ethoxy]-phenyl}-2-piperazin-1-yl-propionic acid methyl ester (Intermediate 4) Diethanolamine (100 g) and 40% HBr aqueous solution (1000 mL) were mixed and vigorously refluxed for 10 h, while water was removed continuously under reduced pressure during the reaction. The resulting solution was concentrated to give 297 g of a brown liquid. The above brown liquid (47.4 g), Intermediate 3A (4.5 g, 11.8 mmol ) and 150 mL of anhydrous ethanol were mixed with refluxing overnight. Thereafter, the mixture was cooled to room temperature, to which Na2CO3 (1.3 g, 11.8 mmol) was added before further refluxing for 10 h. After cooling to room temperature, the mixture was filtered and evaporated to remove ethanol. The residue was dissolved in CHCl3, and washed with water and saturated brine in turn, and then dried over anhydrous Na2SO4. After concentration and purification with silica gel column chromatography (using CHCl3/CH3OH (60/1) as an eluent), Intermediate 4A (1.0 g, 24% yield) as a brown solid was obtained. MS[M]+=449.4 m/e; 1H-NMR (400 MHz, DMSO-d6), delta 7.987.96 (m, 2H), 7.467.38 (m, 3H), 7.06 (d, 2H), 6.81 (d, 2H), 2.702.61 (m, 2H), 2.602.51 (m, 2H), 2.36 (s, 3H).

The synthetic route of 43204-63-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BEIJING MOLECULE SCIENCE AND TECHNOLOGY CO., LTD.; US2007/259883; (2007); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 1295502-53-2, A common heterocyclic compound, 1295502-53-2, name is 4,7-Dibromo-5,6-difluorobenzo[c][1,2,5]thiadiazole, molecular formula is C6Br2F2N2S, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A 100 mLthree-neck round-bottom flask was added with 4-nitro-N-phenyl-N-(4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl)aniline(1.2 mmol, 0.5 g), 4,7-dibromo-5,6-difluorobenzo[c] [1,2,5]thiadiazole(0.5 mmol, 0.17 g), potassium carbonate (2.17 mmol, 0.3 g),toluene (20 mL), H2O (20 mL) and ethanol (8 mL). Under N2 protection,tetrakis (triphenylphosphine) palladium (0.04 mmol,47 mg) was added quickly to the mixture. The reactionwas refluxedat 70 C for 24 h and then water was added. The water phase wasextracted with ethyl acetate before the organic phase was washedwith water and brine. The solvent was removed under reducedpressure after the extract dried over sodium sulfate. Purificationwas done by column chromatography on silica gel usingdichloromethane-petroleum ether as eluent. Yellow solidNTPA2BTF2 was produced (0.20 g, 53%). 1H NMR (400 MHz, DMSO) delta (ppm): 8.15 (d, J 8.9 Hz, 4H), 7.90 (d, J 8.0 Hz, 4H), 7.52 (t,J 7.5 Hz, 4H), 7.44 (d, J 8.2 Hz, 4H), 7.34 (d, J 7.7 Hz, 6H), 6.99(d, J 8.9 Hz, 4H).

The synthetic route of 1295502-53-2 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Bao, Qing; Li, Hua; Li, Yang; He, Jinghui; Xu, Qingfeng; Li, Najun; Chen, Dongyun; Wang, Lihua; Lu, Jianmei; Dyes and Pigments; vol. 130; (2016); p. 306 – 313;,
Bromide – Wikipedia,
bromide – Wiktionary

Some common heterocyclic compound, 2789-89-1, name is 1,2-Bis(4-bromophenyl)ethyne, molecular formula is C14H8Br2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of 1,2-Bis(4-bromophenyl)ethyne

A solution of bis(4-bromophenyl)acetylene (1.500 g, 4.46 mmol, 1 equiv), and iodine(566 mg, 2.23 mmol, 0.5 equiv) in DMSO (7.5 mL) was stirred at 155 00 for 6 h. Thereaction mixture was then cooled down to room temperature and a 1% aqueoussolution of Na2S2O4 (100 mL) was added. The resulting yellow crystals were filtratedand washed with water. Recrystallisation from dioxane afforded 101 as yellow crystals(1.06 g, 65%).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2789-89-1, its application will become more common.

Reference:
Patent; THE UNIVERSITY OF BIRMINGHAM; BARANOFF, Etienne David; HERBAUT, Antoine Joel Maurice; (37 pag.)WO2016/193748; (2016); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Related Products of 615-54-3, A common heterocyclic compound, 615-54-3, name is 1,2,4-Tribromobenzene, molecular formula is C6H3Br3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

1,3,4-bromobenzene (3.12g, 0.01mol) and 2,4,5-tribromophenol (11.47g, 0.035mol) was stirred in a beaker and mix, 110g montmorillonite was added, stirring again mixed after homogenization dedicated microwave reaction flask was transferred to, the reaction was heated under microwave 300w 60min, cooled. 100mL washing liquid collected after the reaction was washed with petroleum ether, evaporated under reduced pressure to give a black oil by column chromatography, to give 4.40 g of a white solid, 69% yield.

The synthetic route of 615-54-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Shandong Analysis Beta Center; Ji Wenhua; Chen Xiangfeng; Zhao Rusong; Gao Qianshan; Geng Yanling; Wang Xiao; (9 pag.)CN104860799; (2016); B;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 4101-68-2, name is 1,10-Dibromodecan, A new synthetic method of this compound is introduced below., Application In Synthesis of 1,10-Dibromodecan

Tempol (0.01 mol) was added to a three-neck flask containing 100 ml dry benzene that is maintained at nitrogen atmosphere. To the flask, sodium hydride (0.015 mol) was added and kept refluxed for 24 hrs. The flask was cooled in ice bath and added 1,10-dibromodecane (0.02 mol) in one portion. The refluxing was then resumed for another 72 hrs. The contents of the flask was cooled in ice bath and added 25 ml water and transferred to a separatory funnel. The red upper benzene layer was separated , dried over anhydrous magnesium sulfate and solvent removed by rotory evaporation to get a red oil. The oil was purified by column chromatography on silica gel 60. The material was added to the column and eluted first with about 150 ml hexane that removed the excess of dibromodecane. The desired bromodecanoyl ether of Tempol was eluted with a mixture of hexane and ether (90:10). The red eluate was collected and was found to be pure on thin layer chromatography plates developed using the same solvent mixture. The yield was 0.008 mol (80%).

The synthetic route of 4101-68-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; COLBY PHARMACEUTICAL COMPANY; MEDICAL COLLEGE OF WISCONSIN, INC.; US2011/59922; (2011); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Adding a certain compound to certain chemical reactions, such as: 955959-84-9, name is 4-(4-Bromophenyl)dibenzo[b,d]furan, belongs to bromides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 955959-84-9, COA of Formula: C18H11BrO

In this example, a method for synthesizing N-(l, r-biphenyl-4-yl)-N-[4-(dibenzofuran-4-yl)phenyl]-9,9-dimethyl-9H-fluoren-2-ami ne (abbreviation: FrBBiF-II) represented by Structural Formula (100) will be described. [0238] [0239] First, 2.1 g (6.6 mmol) of 4-(4-bromophenyl)dibenzofuran, 2.4 g (6.7 mmol) of N-(l,l ‘-biphenyl-4-yl)-9,9-dimethyl-9H-fluoren-2-amine, and 1.9 g (20 mmol) of sodium tert-butoxide were put in a 200-mL three-neck flask and the air in the flask was replaced with nitrogen. To this mixture, 33 mL of toluene, 0.30 mL of a 10 % hexane solution of tri(ter/-butyl)phosphine, and 48 mg (0.1 mmol) of bis(dibenzylideneacetone)palladium(0) were added, and stirring was performed at 90 C for 7.5 hours. After the stirring, suction filtration through Florisil (produced by Wako Pure Chemical Industries, Ltd., Catalog No. 540-00135), Celite (produced by Wako Pure Chemical Industries, Ltd., Catalog No. 531 – 16855), and alumina was carried out to give a filtrate. The filtrate was concentrated to give a solid. The solid was purified by silica gel column chromatography (the developing solvent was hexane and toluene in a ratio of 3:1) to give a solid. The solid was recrystallized from toluene and hexane, so that 3.2 g of an objective solid was obtained in a yield of 81 %. A reaction scheme of this reaction is shown below. [0240] [0241] Using a train sublimation method, 1.0 g of the obtained solid was purified by sublimation. In the purification by sublimation, the pressure was 2.6 Pa, the flow rate of argon gas was 5.0 mL/min, and the temperature of the heating was 289 C. After the purification by sublimation, 0.99 g of a solid which was the object of the synthesis was obtained at a collection rate of 95 %. [0242] Results of measurement of the obtained solid by nuclear magnetic resonance ( NMR) are shown below. NMR (CDCI3, 500 MHz): delta = 1.46 (s, 6H), 7.18 (dd, J = 8.5 Hz, 2.5 Hz, 1 H), 7.26-7.48 (m, 14H), 7.53-7.56 (m, 2H), 7.60-7.68 (m, 6H), 7.86-7.91 (m, 3H), 7.99 (d, J = 7.5 Hz, 1 H). [0243] Thermogravimetry-differential thermal analysis (TG-DTA) of the obtained FrBBiF-II was performed. The measurement was conducted by using a high vacuum differential type differential thermal balance (TG/DTA 2410SA, manufactured by Bruker AXS Kappa.Kappa.)· The measurement was carried out under a nitrogen stream (a flow rate of 200 mL/min) and a normal pressure at a temperature rising rate of 10 C/min. The relationship between weight and temperature (thermogravimetry) shows that the 5 % weight loss temperature is 393 C, which is indicative of high heat resistance. [0244] FIGS. 13A and 13B are NMR charts. Note that FIG. 13B shows an enlarged part of FIG. 13A in the range of 7.00 ppm to 8.25 ppm. The measurement results confirmed that N-(l, -biphenyl-4-yl)-N-[4-(dibenzofuran-4-yl)phenyl]-9,9-dimethyl-9H-fluoren-2-ami ne (abbreviation: FrBBiF-II), which was the target substance, was obtained. [0245] Physical Properties of FrBBiF-Il FIG. 14A shows an absorption spectrum and an emission spectrum of FrBBiF-II in a toluene solution of FrBBiF-II, and FIG. 14B shows an absorption spectrum and an emission spectrum of a thin film of FrBBiF-II. The spectra were measured with a UV-visible spectrophotometer (V550, produced by JASCO Corporation). The spectra of FrBBiF-II in the toluene solution of FrBBiF-II were measured with a toluene solution of FrBBiF-II put in a quartz cell. The spectra of the thin film were measured with a sample prepared by deposition of FrBBiF-II on a quartz substrate by evaporation. Note that in the case of the absorption spectrum of FrBBiF-II in the toluene solution of FrBBiF-II, the absorption spectrum obtained by subtraction of the absorption spectra of the quartz cell and toluene from the measured spectra is shown in the drawing and that in the case of the absorption spectrum of the thin film of FrBBiF-II, the absorption spectrum obtained by subtraction of the absorption spectrum of the quartz substrate from the measured spectra is shown in the drawing. [0246] As shown in FIG. 14A, in the case of FrBBiF-II in the toluene solution, an absorption peak was observed at approximately 360 nm, and an emission wavelength peak was observed at approximately 415 nm (excitation wavelength: 366 nm). As shown in FIG. 14B, in the case of the thin film of FrBBiF-II, absorption peaks were observed at approximately 368 nm, 294 nm, 266 nm, 247 nm, and 209 nm, and an emission wavelength peak was observed at approximately 428 nm (excitation wavelength: 376 nm). Thus, it was found that absorption and light emission of FrBBiF-II occur in extremely short wavelength regions. [0247] The ionization potential of FrBBiF-II in a thin film state was measured by photoelectron spectroscopy (the measuring instrument: AC-2, manufactured by Riken Keiki, Co., Ltd.) in the air. The obtained value of the ionization potential was converted into a negative value, so that the HOMO level of FrBBiF-II was determined to be -5.61 eV. From the da…

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; SEMICONDUCTOR ENERGY LABORATORY CO., LTD.; OGITA, Kaori; SEO, Satoshi; SEO, Hiromi; TAKAHASHI, Tatsuyoshi; WO2014/157018; (2014); A1;,
Bromide – Wikipedia,
bromide – Wiktionary