Category: bromides-buliding-blocks

Some common heterocyclic compound, 68322-84-9, name is 2-Bromo-1-fluoro-4-(trifluoromethyl)benzene, molecular formula is C7H3BrF4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application In Synthesis of 2-Bromo-1-fluoro-4-(trifluoromethyl)benzene

Step F 3- 4- [3- (2-Bromo-4-trifluoromethyl-phenoxy)-5-fluoro-phenoxy]-2-methyl-phenyl}- propionic acid ethyl ester A mixture of 3- [4- (3-fluoro-5-hydroxy-phenoxy)-2-methyl-phenyl]- propionic acid ethyl ester (0.557 g, 1.75 mmol), 3-bromo-4-fluorobenzotrifluoride (0.425 g, 1.75 mmol) and 325 mesh potassium carbonate (0.29 g, 2.10 mmol) in dry DMSO (10 mL) is heated to 100 C and stirred 2.5 hours under N2. The reaction is cooled and acidified with 1 N HCI. The mixture is then diluted with Et20 and extracted with water. The organic layer is dried (Na2S04), and the solvent is removed in vacuo to afford crude product that is absorbed on silica gel and purified by flash chromatography using 5/1 hexanes/ethyl acetate to afford 0.735 g (78%) of the title compound.’H NMR (400 MHz, CDCl3) ; MS (ES+) 7w/Z mass calculated for C25H2104F4Br 540, found 558 and 560 (M + NH4, 100%).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 68322-84-9, its application will become more common.

Reference:
Patent; ELI LILLY AND COMPANY; WO2005/37763; (2005); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 327-52-6, name is 1-Bromo-2,4,5-trifluorobenzene, A new synthetic method of this compound is introduced below., Recommanded Product: 1-Bromo-2,4,5-trifluorobenzene

[0116] Into a 100 mL three- necked flask were added 4.62 g 1- bromo- 2, 4, 5- trifluorobenzene (0.022 mol) andanhydrous tetrahydrofuran (50 mL) . The resulting mixture was cooled to- 20 C. The solution of isopropylmagnesiumbromide (22 mmol) in tetrahydrofuran (22 ml, 1 M THF) was slowly added dropwise under nitrogen. After the additionwas complete, the reactants were maintained at- 20 C for later use.[0117] Cuprous bromide – dimethyl sulfide (0.41 g, 0.002 mol) was suspended in 5 ml anhydrous tetrahydrofuran. Theresulting mixture was cooled to -5 C. The Grignard reagent as obtained above was slowly added dropwise undernitrogen. After 15 min, a solution of the acridine compound as shown in the above reaction formula (4.1 g, 0.015 mol)in 30 mL tetrahydrofuran was slowly added dropwise. After additional 5 min, 50 mL saturated solution of ammoniachloride was added to quench the reaction. Into this obtained solution was added 50 mL ethyl acetate. The separatedwater layer was extracted with another 50 mL ethyl acetate. The obtained organic layers were collected together andfurther washed with saturated solution of sodium chloride and then dried over anhydrous sodium sulfate, followed byfiltration and concentration to obtain a crude product which was further treated by column chromatography to obtain acompound (5.26 g, yield 87%).1H NMR (400 MHz, CDCl3) delta 7.87?7.61 (m, 5H), 7.15?6.94 (m, 1H), 6.88 (d, J = 6.8 Hz, 1 H), 5.02 (d, J = 8.9 Hz, 1 H),4.00?3.80 (m, 1H), 2.92?2.76 (m, 1H), 2.76?2.64 (m, 1H), 2.64?2.44 (m, 2H), 2.06 (d, J = 14.6 Hz, 3H), 1.84 (s, 1 H),1.62 (s, 1H). Ms (M++1): 404.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Zhejiang Hisoar Pharmaceutical Co., Ltd; PAN, Xianhua; LI, Weijin; ZHANG, Qunhui; RUAN, Libo; YU, Wansheng; DENG, Fei; MA, Tianhua; HUANG, Mingwang; HE, Minhuan; EP2647624; (2013); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Some common heterocyclic compound, 399-94-0, name is 1-Bromo-2,5-difluorobenzene, molecular formula is C6H3BrF2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. SDS of cas: 399-94-0

A solution of isopropylmagnesium chloride in THF (2M, 604 mL) was added dropwise to a solution of 2-bromo-1,4-difluorobenzene (244.7 g) in THF (1 L) that had been cooled to -50C. After completion of the dropwise addition, the temperature was warmed to 0C while stirring for 1 h. The reaction mixture was cooled to -50C again. To the reaction mixture was added a solution of 4-chloro-N-methoxy-N-methylbutyramide (100 g) in THF (200 mL) dropwise under stirring, and gradually warmed to 30C and then continuously stirred at 30C for 3h. The reaction mixture was quenched with a saturated aqueous ammonium chloride solution and extracted with ethyl acetate. The collected organic phase was washed with water and then a saturated saline solution. The organic layer was separated, dried over anhydrous sodium sulfate, and filtered. The filtrate was concentrated under reduced pressure, and the residue was purified by silica gel column chromatography to afford the title compound (101 g). 1H NMR (400 MHz, CDCl3) delta 7.59-7.55 (m, 1H), 7.26-7.20 (m, 1H), 7.17-7.11 (m, 1H), 3.68-3.65 (m, 2H), 3.20-3.16 (m, 2H), 2.25-2.19 (m, 2H). m/z=219[M+1]+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 399-94-0, its application will become more common.

Reference:
Patent; Chia Tai Tianqing Pharmaceutical Group Co., Ltd.; Centaurus BioPharma Co., Ltd.; Lianyungang Runzhong Pharmaceutical Co., Ltd.; ZHU, Li; HU, Yuandong; WU, Wei; DAI, Liguang; DUAN, Xiaowei; YANG, Yanqing; SUN, Yinghui; HAN, Yongxin; PENG, Yong; KONG, Fansheng; LUO, Hong; YANG, Ling; XU, Hongjiang; GUO, Meng; ZHONG, Zhaobai; WANG, Shanchun; (80 pag.)EP3533796; (2019); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 615-59-8,Some common heterocyclic compound, 615-59-8, name is 1,4-Dibromo-2-methylbenzene, molecular formula is C7H6Br2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

In a 250 ml three-necked round-bottom flask equipped with a reflux condenser, thermometer, dropping funnel with pressure-equalizing, and magnetic stirring bar, and containing 74.9 g (0.30 mol) of 3,6-dibromotoluene, 15.5 ml (47.9 g, 0.30 mmol) of bromine was added dropwise under exposure to 500 W lamp for 3 hours at 19O0C. The resulting mixture was cooled to room temperature. Fractional distillation gave colorless liquid, b.p. 132-135°C/3 mm Hg. Yield 84.3 g (85percent).Anal. calc. for C7H5Br3: C, 25.57; H, 1.53. Found: C, 25.81; H, 1.62.1H NMR (CDCl3): delta 7.59 (m, IH, 5-H), 7.43 (m, IH, 3-H), 7.28 (m, IH, 3- H), 4.52 (s, 2H, CH2).13C NMR (CDCl3): delta 138.9, 134.6, 134.0, 133.1 , 123.0, 121.5, 32.2.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1,4-Dibromo-2-methylbenzene, its application will become more common.

Reference:
Patent; EXXONMOBIL CHEMICAL PATENTS INC.; WO2007/70041; (2007); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

These common heterocyclic compound, 52997-43-0, name is 7-(Bromomethyl)pentadecane, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 52997-43-0

General procedure: General procedure for the synthesis of a1-a6: To a solution of indoline-2,3-diones (10 mmol) in DMF (40 mL) was added K2CO3(15 mmol, 2.073 g) and 7-(bromomethyl)pentadecane (11 mmol,3.358 g) under nitrogen. The mixture was stirred at 70 C and monitoredby TLC. After the reaction completed, water was added, andextracted with EtOAc. The organic layer was combined and dried withMgSO4. After evaporation of the solvent, the residue was purified bycolumn chromatograph (eluent: Petroleum/EtOAc=20:1) to give thetarget compound.

The synthetic route of 7-(Bromomethyl)pentadecane has been constantly updated, and we look forward to future research findings.

Reference:
Article; Hu, Qian; Jiang, Hua; Cui, Zhihua; Chen, Weiguo; Dyes and Pigments; vol. 173; (2020);,
Bromide – Wikipedia,
bromide – Wiktionary

Electric Literature of 1647-23-0, The chemical industry reduces the impact on the environment during synthesis 1647-23-0, name is 1-Bromo-3,3-dimethylbutane, I believe this compound will play a more active role in future production and life.

EXAMPLE 24A Methyl 2-(4-fluorophenyl)-2,5,5-trimethylhexanoate A solution of the compound of Example 22A (11.75 g, 64.6 mmol) in tetrahydrofuran (30 mL) was added dropwise over 20 min to a -78 C. solution of lithium hexamethyldisilazide (previously prepared from hexamethyldisilazane (17.0 mL, 80.7 mmol) and n-butyllithium in hexane (2.5 M, 31.0 mL, 77.5 mmol)) in tetrahydrofuran (40 mL) and allowed to stir at that temperature for 1 h. The solution was then treated with 1-bromo-3,3-dimethylbutane (12.0 mL, 83.9 mmol), followed by stirring at -78 C. for 30 min, and then warming to 25 C. for 18 h. The solution was quenched by addition of saturated ammonium chloride solution (4 mL) and then concentrated in vacuo. The residue was diluted with ethyl acetate and water. The organic layer was extracted with water (2*), saturated NaCl solution and dried (Na2SO4). Concentration in vacuo afforded an oil, which was distilled under reduced pressure (90-93 C./0.3 mm Hg) to afford the product (4.85 g, 28%) as a colorless oil. 1H NMR (300 MHz, CDCl3): delta 0.86 (s, 9H) 1.03 (m, 2H) 1.51 (m, 3H) 1.86 (m, 1H) 2.00 (m, 1H) 3.65 (m, 3H) 7.03 (m, 2H) 7.27(m, 2H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Bromo-3,3-dimethylbutane, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Hutchinson, Douglas K.; Bellettini, John R.; Betebenner, David A.; Bishop, Richard D.; Borchardt, Thomas B.; Bosse, Todd D.; Cink, Russell D.; Flentge, Charles A.; Gates, Bradley D.; Green, Brian E.; Hinman, Mira M.; Huang, Peggy P.; Klein, Larry L.; Krueger, Allan C.; Larson, Daniel P.; Leanna, M. Robert; Liu, Dachun; Madigan, Darold L.; McDaniel, Keith F.; Randolph, John T.; Rockway, Todd W.; Rosenberg, Teresa A.; Stewart, Kent D.; Stoll, Vincent S.; Wagner, Rolf; Yeung, Ming C.; US2005/107364; (2005); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

These common heterocyclic compound, 4333-56-6, name is Bromocyclopropane, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 4333-56-6

A flame dried two-neck round bottom flask fitted with a reflux condenser and N2 outlet was charged with anhydrous THF, freshly activated Mg (120 mg, 4.95 mmol) and a catalytic amount of iodine. A small portion of cyclopropyl bromide dissolved in THF was added. Afier initiation of reflux, the reaction mixture was cooled to -20 C. and the remaining cyclopropyl bromide (500 mg, 4.13 mmol) was gradually added. Afier 30 mm a freshly distilled solution of glyoxalate 45 (549 mg, 5.37 mmol) in THF was added over a 10 mm period and the resulting solution was stirred at -20 C. for 2 h before being quenched with a small amount of watet After 10 mm the reaction mixture was thrther diluted with water (50 mL) and extracted with ethyl acetate (3×50 mL). The organic extracts were combined, dried over anhydrous Mg504, filtered, concentrated in vacuo and purifiedby column chromatography eluting with ethyl acetate/nhexane (a gradient of 10-20%) to furnish ethyl a-hydroxy132 cyclopropaneacetate (422 mg, 71%) as a viscous oil. The oil (350 mg, 2.43 mmol) was dissolved in anhydrous DCM and cooled to 0 C. Then Ph3P (2.04 gm, 7.78 mmol) was added followed by C13r4 (1.20 gm, 3.64 mmol). The reactionmixture was stirred at 0 C. for 2 h and then concentrated in vacuo. The Ph3PO was precipitated by addition of n-hexane and removed by filtration. The crude reaction mixture was purified by flash column chromatography to furnish ethyl a-bromocyclopropaneacetate (46, R=c-Pr): (311 mg, 62%yield).

The synthetic route of Bromocyclopropane has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Brandeis University; University of Georgia Research Foundation, Inc.; The Brigham and Women’s Hospital, Inc.; Hedstrom, Lizbeth K.; Cuny, Gregory D.; Gollapalli, Deviprasad R.; Kirubakaran, Sivapriya; Maurya, Sushil K.; Striepen, Boris; Gorla, Suresh K.; Johnson, Corey R.; Kavitha, Mandapati; Khan, Jihan; (149 pag.)US10125116; (2018); B2;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 112734-22-2, name is (4-Bromo-2-fluorophenyl)methanamine, A new synthetic method of this compound is introduced below., Quality Control of (4-Bromo-2-fluorophenyl)methanamine

To a solution of (4-bromo-2-fluorophenyl) methanamine (2.5 g, 12 mmol) in CH2Cl2 (50 mL) at 0 C was added di-tert-butyl dicarbonate (4.01 g, 18 mmol) and triethylamine (2.6 mL, 18 mmol). The mixture was allowed to warm to room temperature and stirred for 2h. Water was added (50 mL) and the layers were separated. The organic layer was washed with brine, dried over sodium sulfate and concentrated in vacuo. The crude product was purified by flash silica column chromatography (heptane:ethyl acetate) (1:0 to 4:1) to afford the title compound as a colorless oil. (2.7 g, 71%). 1H NMR (400 MHz, DMSO-d6) delta ppm 7.21-7.26 (m, 3 H), 4.90 (br s, H), 4.27-4.33 (m, 2 H), 1.44 (s, 9 H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Emergent Product Development Gaithersburg Inc.; Roussel, Patrick; Heim, Jutta; Schneider, Peter; Bartels, Christian; Liu, Yaoquan; Dale, Glenn; Milligan, Daniel; (107 pag.)EP3034078; (2016); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 937046-98-5,Some common heterocyclic compound, 937046-98-5, name is 7-Bromopyrrolo[2,1-f][1,2,4]triazin-4-amine, molecular formula is C6H5BrN4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a degassed solution of 7-bromopyrrolo[2,l-f][l,2,4]triazin-4-ylamine (10.0 g, 46.9 mmol) in anhydrous DMF (78 mL) and triethylamine (47 mL) was added tetrakis(triphenylphosphine)palladium(0) (2.17 g, 1.88 mmol, 0.04 eq) and copper (I) bromide dimethylsulfide complex (0.77 g, 3.75 mmol, 0.08 eq). After degassing with N2 for 5 min., propargyl alcohol (8.2 mL, 140.8 mmol, 3.0 eq) was added, and the reaction mixture was stirred at 900C for 6h. The reaction was quenched with 5% aq. NH3 in saturated aq. NH4Cl. The aqeuous layer was washed with EtOAc (Ix) followed by 25% iPrOH in DCM (3x). The combined organic layers were dried over MgSO4, filtered through a pad of celite, and concentrated at reduced pressure. The crude product was purified by MPLC eluted with 5% EtOH/DCM. Trituration from EtOAc afforded 4.75 g (53.8%) of the desired product as a yellow solid. 1H-NMR (DMSO-^6) §7.89 (s, IH), 7.88 (broad s, 2H), 6.85 (dd, 2H), 5.39 (t, IH), 4.36 (d, 2H); MS LC-MS [M+H]+ = 189, RT = 1.08 min.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 7-Bromopyrrolo[2,1-f][1,2,4]triazin-4-amine, its application will become more common.

Reference:
Patent; BAYER PHARMACEUTICALS CORPORATION; WO2007/64931; (2007); A2;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 4117-09-3, name is 7-Bromo-1-heptene, A new synthetic method of this compound is introduced below., Recommanded Product: 7-Bromo-1-heptene

9-Hept-6-enyloxy-5-hydroxymethyl-2-isopropyl-l-methyl-l,4,5,6-tetrahydro- 2H-benzo[e][l,4]diazoein-3-one (3): 7-Bromo-l-heptene (44 muL, 0.29 mmol), KI (72 mg, 0.43 mmol), and K2CO3 (80 mg, 0.58 mmol) were added to a solution of compound 2 (40 mg, 0.14 mmol) in anhydrous N,iV-dimethylformamide (DMF; 2 mL), and then heated at 8O0C for 8 h. The mixture was cooled and extracted with EtOAc (50 mL), washed with H2O (30 mL) and brine (30 mL), dried over anhydrous Na2Stheta4 (sodium sulfate), concentrated, and purified by column chromatography to afford compound 3 (17 mg, 31%); [af£ -221.23 (c=0.09 in MeOH); 1H NMR (400 MHz, CDCl3): delta=6.93 (brs, 1 H), 6.92 (d, /=8.0 Hz, 1 H), 6.52 (d, /=4.0 Hz, 1 H), 6.41 (dd, /=4.0, 8.0 Hz, 1 H), 5.87-5.77 (m, 1 H), 5.03-4.94 (m, 2 H), 3.93- 3.89 (m, 3 H), 3.72-3.66 (m, 2 H), 3.50-3.48 (m, 2 H), 3.03 (dd, /=8.0, 16.0 Hz, 1 H), 2.77 (s, 3 H), 2.77-2.69 (m, 1 H), 2.45-2.37 (m, 1 H), 2.09-2.08 (m, 2 H), 1.79- 1.76 (m, 2 H), 1.47- 1.46 (m, 4 H), 1.05 (d, /=8.0 Hz, 3H), 0.87 ppm (d, /=8.0 Hz, 3H); 13C NMR (100 MHz, CDCl3): delta =174.4, 159.0, 152.8, 139.0, 132.5, 123.2, 1 14.7, 106.8, 106.6, 70.0, 68.1, 66.1 , 54.8, 36.7, 35.3, 33.9, 29.4, 28.9, 28.5, 25.8, 20.7, 20.1 ppm; ESI-HRMS calculated for [C22H34N2O3+H]”: 375.2648, found: 375.2642; HPLC purity: 95.1 %.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; THE BOARD OF TRUSTEES OF THE UNIVERSITY OF ILLINOIS; KOZIKOWSKI, Alan; CHEN, Yihua; WO2010/17272; (2010); A2;,
Bromide – Wikipedia,
bromide – Wiktionary