Category: bromides-buliding-blocks

Application of 2695-48-9, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 2695-48-9 as follows.

To a mixture of magnesium turnings (613.5 mg, 25.25 mmol) in dry diethyl ether (30 ml) was added 8-bromo-1-octene (4.236 ml, 25.25 mmol) and stirred at room temperature for 1 h until magnesium was dissolved. Then to the Grignard solution was added dry benzene (15 ml) and followed 5,5,6,6,6-pentafluorohaxaxenitrile (1.89 g, 10.10 mmol) dissolved in dry diethyl ether (15 ml) was added dropwise at room temperature. After the reaction mixture was stirred for 1 h, 1N hydrochloric acid solution (27 ml) was added and stirred for 1 hour additionally. Then to the reaction solution was added water, which was extracted with ethyl acetate. The organic layer was washed with water and saturated sodium chloride solution, dried over anhydrous magnesium sulfate and concentrated under reduced pressure. The residue was purified with column chromatography (n-hexane:ethyl acetate=9:1) to give 1.892 g (yield: 62%) of the title compound as a colorless oil. [01353] 1H-NMR (270 MHz, CDCl3) delta: 5.83-5.71 (m, 1H, CH2CH), 4.96 (d, J=17 Hz, 1H, CH2CH), 4.92 (d, J=11 Hz, 1H, CH2CH), 2.51 (t, J=7 Hz, 2H, COCH2), 2.39 (t, J=7 Hz, 2H, COCH2), 2.03-1.83 (m, 6H, CH2CHCH2 and CF2CH2CH2), 1.56 (m, 2H, COCH2CH2), 1.29 (m, 6H, CH2CH2CH2).

According to the analysis of related databases, 2695-48-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Chugai Seiyaku Kabushiki Kaisha; US6645951; (2003); B1;,
Bromide – Wikipedia,
bromide – Wiktionary

Electric Literature of 10485-09-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 10485-09-3, name is 2-Bromoindene belongs to bromides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Production Example 1 Synthesis of a Li salt of 2,2′-diindenyldimethylsilane In a 200 ml-two-neck flask, THF (10 ml) and Mg (2.5g, 1.0 mmol) were incorporated. Further, 1,2-dibromoethane (0.1 ml) was added. The resultant was stirred at room temperature for 10 minutes, whereby the Mg surface was activated. To this, 2-bromoindene (5.0g, 26 mmol) which had been dissolved in THF (40 ml) was added dropwise by means of a pressure equalizing funnel. The resulting reaction mixture was cooled on ice bath, and then, dichlorodimethylsilane (29.7 ml, 246 mmol) was added dropwise. After stirring the reaction mixture for overnight, the solvent was distilled off. Extraction was conducted from the resulting solid by using hexane (50 ml * 2). By subjecting the resulting extraction solution to evaporation dryness, 2,2′-diindenyldimethylsilane was obtained as a pale yellow oily product (3.47g, 12.0 mmol, 94%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Bromoindene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Idemitsu Kosan Co., Ltd.; YABUGAMI, Minoru; OKAMOTO, Takuji; EP2650300; (2013); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Related Products of 502496-36-8,Some common heterocyclic compound, 502496-36-8, name is 3-Bromo-5-fluoro-2-methylaniline, molecular formula is C7H7BrFN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

[00404] 3-Bromo-5-fluoro-2-methyl-aniline (725 mg, 3.55 mmol), bis(pinacolato)diboron(1 .08 g, 4.26 mmol) and potassium acetate (1 .05 mg, 10.7 mmol) were mixed in 1 ,4-dioxane (35 mL) and nitrogen gas was blown through for 5 minutes. 1,1-Bis(diphenyl-phosphino)ferrocene- palladium(1,1)dichloride DCM adduct (174 mg, 0.21 mmol) was added and the mixture was heated under ref lux conditions for 4 hours. The reaction was allowed to cool – excess dioxanewas removed and the residue was diluted with EtOAc and filtered through celite. The organic solution was concentrated. The crude material was purified by column chromatography (24g silica) with a gradient 0 – 50% EtOAc in hexanes to give 5-fluoro-2-methyl-3-(4,4,5,5- tetramethyl-1 ,3,2-dioxaborolan-2-yl)aniline (0.761 g, 2.79 mmol, 78.5%).[00405] 1H NMR (DMSO-d6): O 6.91 (dd, J= 2.7 and 9.0 Hz, 1H), 6.50 (dd, J= 2.6 and10.0 Hz, 1H), 3.88 (bs, 2H), 2.34 (5, 3H), 1.36 (5, 12H).

The synthetic route of 502496-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; CANCER RESEARCH TECHNOLOGY LIMITED; GOLDBERG, Kristin; HAMILTON, Niall; JONES, Stuart; JORDAN, Allan; LYONS, Amanda; NEWTON, Rebecca; OGILVIE, Donald; WASZKOWYCZ, Bohdan; WO2015/79251; (2015); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Synthetic Route of 60956-23-2,Some common heterocyclic compound, 60956-23-2, name is 1,2-Dibromo-4-methylbenzene, molecular formula is C7H6Br2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A 12 mL vial was charged with Pd(OAc)2 (2 mol%), BuPAd2 (6 mol%), and a stirring bar. Then, 2 ml dioxane and 1 mmol of bromobenzene were injected by syringe. The vial (or several vials) was placed in an alloy plate, which was transferred into a 300 mL autoclave of the 4560 series from Parr Instruments under argon atmosphere. After flushing the autoclave three times with NH3, a pressure of 2 bar NH3 and 2 bar CO was adjusted at ambient temperature. Then, the reaction was performed for 16 hours at 100 oC. After the reaction is finished, the autoclave was cooled down to room temperature and the pressure was released carefully. Then, CuI (5 mol%), DMEDA (10%), K2CO3 (3 mmol) and 1,2-dibromobenzene were added in under air, the vial was closed and heated to 110oC for 20 hours. The reaction mixture cooled down to room temperature. The solution was extracted 3-5 times with 2-3 ml of ethyl acetate from aqua solution. After evaporation of the organic solvent the residue was adsorbed on silica gel and the crude product was purified by column chromatography using n-heptane/AcOEt (20:1) as eluent.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1,2-Dibromo-4-methylbenzene, its application will become more common.

Reference:
Article; Wu, Xiao-Feng; Neumann, Helfried; Neumann, Stephan; Beller, Matthias; Tetrahedron Letters; vol. 54; 24; (2013); p. 3040 – 3042;,
Bromide – Wikipedia,
bromide – Wiktionary

Reference of 327-51-5, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 327-51-5 as follows.

1,4-Dibromo-2,5-difluorobenzene, 4-methoxycarbonylphenylboronic acid, potassium carbonate and tetrakis (triphenylphosphine) palladium were placed in a reaction In the reactor, and ethylene glycol dimethyl ether was added to the reactor, Then under the protection of nitrogen at 85 C for 36h after the first reaction A reaction solution, after the first reaction solution is cooled, The first reaction solution was poured into water and extracted with dichloromethane, and then ethylene glycol dimethyl ether was removed, The remaining material after pumping away ethylene glycol dimethyl ether, separated and purified by silica gel column chromatography to give To the intermediate product 2 ‘, 5′-difluoro- [1,1’: 4 ‘, 1 “-terphenyl] -4,4” -dimethyl ester;

According to the analysis of related databases, 327-51-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Guangdong University of Technology; He Jun; Huang Jian; Cao Peng; He Yonghe; Huang Jiahong; (22 pag.)CN105542751; (2017); B;,
Bromide – Wikipedia,
bromide – Wiktionary

Electric Literature of 626-40-4,Some common heterocyclic compound, 626-40-4, name is 3,5-Dibromoaniline, molecular formula is C6H5Br2N, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Compound II-2 (2.51 g, 10 mmol), Compound III (2.06 g, 10 mmol), Pd(OAc)2 (0.22 g, Lmmol), BINAP (2,2,-bisdiphenylphosphino-1,1′-binaphthyl, 0.62g, 1mmol) and t-BuOK (2.24g, 20mmol) plus Into 50 mL of dry 1,2-dimethoxyethane (DME), the reaction mixture was stirred overnight under a nitrogen atmosphere and TLC detection was performed. The reaction is now complete. The reaction mixture was carefully poured into 200 mL of ice water, stirred, extracted with 50 mL of X 3 CH 2 Cl 2 , and the extraction phases were combined. It was washed with 1% dilute hydrochloric acid and brine and dried over anhydrous sodium sulfate. The desiccant is filtered off with suction and the filtrate is evaporated to dryness on a rotary evaporator. The residue was purified using silica gel column chromatography to give compound IV-2.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3,5-Dibromoaniline, its application will become more common.

Reference:
Patent; Guangdong Sai Bo Technology Co., Ltd.; Guo Huijun; (8 pag.)CN108003169; (2018); A;,
Bromide – Wikipedia,
bromide – Wiktionary

Electric Literature of 4549-33-1, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 4549-33-1 name is 1,9-Dibromononane, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

To a stirred solution of mixture of 3,7-bis(tert-butoxycarbonylamino)-2,8-dimethyl-5- phenylphenazin-5-ium chloride and 3,7-bis(tert-butoxycarbonylamino)-2,6-dimethyl-5- phenylphenazin-5-ium chloride (500 mg, 0.909 mmol) in 10 mL of DMF was added cesium carbonate (738 mg, 2.27 mmol) and stirred at RT for 15 min. The reaction mixture was cooled to 0C and 1,9-dibromononane (156 mg, 0.545 mmol, diluted with 1 mL of DMF) was added dropwise. The reaction mixture was stirred at RT for 12 h. The reaction was monitored by TLC and LCMS. After completion of reaction, the mixture was diluted with ice-cold water and filtered. The solid residue obtained after filtration was dissolved in diethyl ether (200 mL) and washed with brine solution (3×50 mL). The ether layer was dried over anhydrous sodium sulfate, concentrated under reduced pressure to afford the crude product which was purified by column chromatography (neutral alumina, eluent 0-20% EtOAc in hexane) to afford the desired product (mixture of 2 products of same mass) as a dark brown solid (400 mg).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1,9-Dibromononane, and friends who are interested can also refer to it.

Reference:
Patent; MEDIVATION TECHNOLOGIES, INC.; RAI, Roopa; PHAM, Son Minh; HART, Barry Patrick; (437 pag.)WO2017/19832; (2017); A1;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1647-26-3, name is 1-Bromo-2-cyclohexylethane, A new synthetic method of this compound is introduced below., COA of Formula: C8H15Br

General procedure: The alkyl bromide (1.0 equiv) was added to a solution of mercaptoaceticacid (1.0 equiv) in methanol (10.0 mL) and the resultingsolution stirred. Then a solution of NaOH (2.0 equiv) in methanol(5.0 mL)was added slowly, and the final mixturewas stirred at roomtemperature or heated to reflux until absence of the alkyl bromide(checked by TLC). The reaction mixture was concentrated in vacuo,diluted with H2O, and neutralized with 1 N HCl. Then the obtainedreaction mixture was extracted with EtOAc. The combined organicfractions were washed with brine, dried with Na2SO4, and concentratedin vacuo. Purification of the crude residue by column chromatography(petroleum ether/EtOAc) afforded the title compound.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Chen, Ying; Wu, Bolin; Hao, Yameng; Liu, Yunqi; Zhang, Zhili; Tian, Chao; Ning, Xianling; Guo, Ying; Liu, Junyi; Wang, Xiaowei; European Journal of Medicinal Chemistry; vol. 171; (2019); p. 420 – 433;,
Bromide – Wikipedia,
bromide – Wiktionary

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 61613-22-7, name is 2-Bromo-N-phenylaniline, A new synthetic method of this compound is introduced below., HPLC of Formula: C12H10BrN

To obtain the D1-DPS, compound 1a of the -OH formationreaction, and compound 2 of the cyclization reactionwere synthesized. Compound 1 (3 g, 12 mmol) was dissolvedin 50 ml of anhydrous tetrahydrofuran (THF) underhigh purity argon in a one neck round bottom flask. It wascooled to -78 C using solid carbon with acetone and then n-butyllithuim (2.5 M in cyclohexane, 24.7 mmol)was added dropwise slowly. Stirring was continued for 1 h before, cooling for 20-30 min. Then a solution of9-fluorenone (2.4 g, 13.3 mmol) in THF was added at-78 C under an argon atmosphere. The mixture wasstirred for 3 h in the same environment. The reaction was completed after the confirmation of compound 1a. Two side products and reactants appeared by TLC with a solutionof hexane and ethyl acetate (10:1). Additional quenching was not required. The mixture was then worked up using water and dichloromethane. The extracted organiclayer was dried by anhydrous MgSO4. For compound 2, compound 1a was placed in a oneneckround bottom flask, to which, chloroform (10 ml)and methane sulfonic acid (MSA, 5 ml) were added whilestirring at room temperature for 15 min. The progress ofthe reaction was monitored by TLC with a solution of hexane and ethyl acetate (5:1). The resulting mixture wasquenched by saturated aqueous NaHCO3 and extractedwith dichloromethane after the reaction completed. Th esolid product was recrystallized using chloroform and hexane.A slightly yellow solid product was obtained, whichwas then purified by column chromatography with hexane and ethyl acetate.Two intermediates, the DPS acceptor and the compound 2 donor, were reacted for D1-DPS by theBuchwald-Hartwig amination. Compound 2 (0.5 g,1.38 mmol), DPS (0.48 g, 1.38 mmol), pd(dba)2 (0.008 g,0.014 mmol), t-BuONa (0.27 g, 2.77 mmol), and triphenylphosphine(0.003 g, 0.011 mmol) showed high purityAr charging. Then toluene (20 ml) was added and refluxedfor 5 h at 115 C. Quenching was not required. The resultingmixture was worked up using ethyl acetate and water.A small amount of water in the extracted organic layerwas removed by MgSO4 and filtered with celite to removethe inorganic materials. Finally, column chromatographywas applied with hexane and dichloromethane.The white solid product was recrystallized byhexane.

The synthetic route of 61613-22-7 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Lee, In Hye; Kim, Ki Ju; Kim, Young Kwan; Kim, Young Sik; Shin, Dong Myung; Journal of Nanoscience and Nanotechnology; vol. 19; 8; (2019); p. 4583 – 4589;,
Bromide – Wikipedia,
bromide – Wiktionary

Related Products of 608-30-0, A common heterocyclic compound, 608-30-0, name is 2,6-Dibromoaniline, molecular formula is C6H5Br2N, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

(1) Adding 1 mole of 2,6-dibromoaniline to a four-necked flask,Adding 50% sulfuric acid to the flask, stirring was started, and a 15% aqueous solution of sodium nitrite was added dropwise at a temperature of 0-5 C, and the dropping time was 2 hours.After the dropwise addition is kept for 1 hour, 2,6-dibromoaniline is subjected to diazotization reaction at 0 to 5 C under acidic conditions, and the reaction is completed to obtain a dibromoaniline diazonium salt aqueous solution;The molar ratio of 2,6-dibromoaniline to sodium nitrite is 1:1.05, and the molar ratio of sodium nitrite to sulfuric acid is 1:4;(2) adding hypophosphorous acid to the flask in the dibromoaniline diazonium salt aqueous solution prepared in the step (1), then raising the temperature to 70-80 C, and maintaining the reaction for 3 hours to obtain a mixed solution containing m-dibromobenzene. ; the molar ratio of hypophosphorous acid to 2,6-dibromoaniline is 1.3:1;(3) The mixture obtained in the step (2) is allowed to stand for 30 minutes to be layered, and then the inorganic phase and the organic phase are separated, the organic phase is washed with water, and the inorganic phase and the organic phase are separated by standing. The organic phase can be distilled under reduced pressure to obtain m-dibromobenzene; the calculated yield is over 81%, and the detection purity is over 98%.

The synthetic route of 608-30-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Shandong Tianyi Chemical Co., Ltd.; Tang Xingsan; Xing Xiaohua; Zhang Ming; (6 pag.)CN110078587; (2019); A;,
Bromide – Wikipedia,
bromide – Wiktionary